62524237f0
DPI values are autogenerated from the resolution and collected display size values. These values are inserted as comments as well. Change-Id: Id03aedf9af18348f773dfce002805e480f6751e8
152 lines
4.1 KiB
C
152 lines
4.1 KiB
C
/*
|
|
* This config file is for the Logik DAX MP3/DAB
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 33
|
|
|
|
#define MODEL_NAME "Logik DAX MP3/DAB"
|
|
|
|
/* define this if you have recording possibility */
|
|
//#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
|
|
|
|
#if 0 /* Enable for USB driver test */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x13d1
|
|
#define USB_PRODUCT_ID 0x1002
|
|
#endif
|
|
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
#define CONFIG_STORAGE STORAGE_NAND
|
|
|
|
#define CONFIG_NAND NAND_TCC
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
/* sqrt(128^2 + 64^2) / 1.0 = 143.1 */
|
|
#define LCD_DPI 143
|
|
#define LCD_DEPTH 1
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_DARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x5a915a
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0x82b4fa
|
|
|
|
/* define this to indicate your device's keypad */
|
|
#define CONFIG_KEYPAD LOGIK_DAX_PAD
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_TCC77X
|
|
|
|
/* define this if you have RTC RAM available for settings */
|
|
//#define HAVE_RTC_RAM
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x38000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x10000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* The DAX uses built-in WM8731 codec */
|
|
#define HAVE_WM8731
|
|
/* Codec is slave on serial bus */
|
|
#define CODEC_SLAVE
|
|
/* WM8731 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define CONFIG_I2C I2C_TCC77X
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* define this if the unit should not shut down on low battery. */
|
|
#define NO_LOW_BATTERY_SHUTDOWN
|
|
|
|
/* Define this if you have a TCC773L */
|
|
#define CONFIG_CPU TCC773L
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 120000000
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 4
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 6
|
|
|
|
/* The start address index for ROM builds */
|
|
/* #define ROM_START 0x11010 for behind original Archos */
|
|
#define ROM_START 0x7010 /* for behind BootBox */
|
|
|
|
#define CONFIG_LCD LCD_SSD1815
|
|
|
|
#define BOOTFILE_EXT "logik"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/"
|
|
|
|
#define IBSS_ATTR_VOICE_STACK
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
#define ICODE_ATTR_TREMOR_MDCT
|
|
#define ICODE_ATTR_FLAC
|
|
#define IBSS_ATTR_FLAC_DECODED0
|
|
#define ICONST_ATTR_MPA_HUFFMAN
|
|
#define IBSS_ATTR_MPC_SAMPLE_BUF
|
|
#define ICODE_ATTR_ALAC
|
|
#define IBSS_ATTR_SHORTEN_DECODED0
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
//#define HAVE_HOTKEY
|