Rafaël Carré 3520d8e90e Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver ... The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument. If there is no argument, it's set to 0 and a NOP command is issued If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it. Benefit : c200v2 transfers the command and the argument in one 16 bits transfer Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable() lcd_send_data() now transfers whole lines (or columns) instead of single pixels yuv is disabled for c200v2 for now Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657		2009-06-17 19:55:27 +00:00
..
sansa-c200	Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver	2009-06-17 19:55:27 +00:00
sansa-e200	Remove unnecessary #include "adc.h"	2009-04-25 22:24:59 +00:00
adc-target.h
app.lds	Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').	2009-02-20 02:33:40 +00:00
audio-c200_e200.c
backlight-c200_e200.c	Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c	2009-04-26 01:23:39 +00:00
backlight-target.h
boot.lds
power-c200_e200.c
powermgmt-target.h