| .. |
|
common
|
Onda VX747:
|
2009-02-13 00:45:49 +00:00 |
|
decompressor
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
drivers
|
Submit FS#9863 by Boris Gjenero. Correct ATA wakeup and power on in case of SYS_USB_CONNECTED. This way HDDs are spun down properly afterwards before rebooting to USB.
|
2009-02-22 13:24:58 +00:00 |
|
export
|
replace USB_IPODSTYLE by USB_HANDLED_BY_OF as that's what it actually means. Fix various configs to use it correctly.
|
2009-02-21 17:56:31 +00:00 |
|
include
|
Removed the sim_ prefix from the plugin api.
|
2009-01-07 09:53:46 +00:00 |
|
target
|
Submit FS#9890 by Boris Gjenero. Enabling option for iPod Video to shut down LCD and BCM (controller) after backlight was switched off. With this option the user can decide whether to keep the transflective LCD switched on (e.g. during daylight use) or to switch it off (to save power). The power saving is extreme and increases the battery runtime by far (measured >30%).
|
2009-02-21 11:10:50 +00:00 |
|
test
|
Added keymaps for ZVM to plugins. Enabled zvm plugin building in tools/configure. FS#9605 by Adam Hogan and Robert Menes.
|
2008-12-04 21:28:56 +00:00 |
|
usbstack
|
Commit my patch from FS#9940 - fix the invalid active flags in the Gigabeat S MBR on the fly in the UMS driver. It is hypothosized that actually changing these on the disk will make the OF more likely to reformat the data partition during recovery - but that is not confirmed. So we play it safe.
|
2009-02-22 18:25:16 +00:00 |
|
arabjoin.c
|
|
|
|
arabjoin.h
|
|
|
|
ata_idle_notify.c
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
backlight-sw-fading.c
|
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
|
2009-01-26 23:21:49 +00:00 |
|
backlight.c
|
Add a rockbox kernel thread for simulator specific tasks, and use that for calling the screendump function(s). Fixes screendump in simulators for backlight-less targets (Ondio), and reduces mixing of unrelated functionality a bit (screendump was called from backlight thread, triggered by a sim-only system wide event).
|
2009-02-20 17:13:08 +00:00 |
|
bidi.c
|
Disable bidirectional text handling and arabic joining in the bootloaders in order to save space. * Disable greyblitting in archos bootloaders for the same reason.
|
2008-09-23 18:46:27 +00:00 |
|
buffer.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
COPYING
|
|
|
|
debug.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
events.c
|
Apply FS#9155 (Simplified battery bench). This is a simplification/rework of the current battery bench code. Battery measurements are now done simply once a minute (no more dependency on HDD specific timeouts) and are flushed to disk by using the ata_idle callback instead of polling ata_disk_is_active (this call is removed from the plugin API now) to make the plugin as unobtrusive as possible. This battery bench plugin also works for flash-based targets like sansa e200.
|
2008-08-14 22:35:00 +00:00 |
|
firmware.make
|
Speed up Player build a bit by not building a useless sysfont.o.
|
2009-01-02 12:47:11 +00:00 |
|
font.c
|
Disable the whole loadable font code including font caching for bootloaders/ bootbox.
|
2008-09-23 21:35:54 +00:00 |
|
font_cache.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.c
|
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
|
2009-02-10 23:43:37 +00:00 |
|
hangul.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hotswap.c
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
ifp_usb_serial.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
kernel.c
|
Remove struct spinlock to cleanup some mess and simplify. It's only used in boosting for multiprocesors and a pure two-corelock heirarchy will do just fine.
|
2009-02-03 12:16:45 +00:00 |
|
logf.c
|
Fix building of tools/database/
|
2009-02-07 19:59:51 +00:00 |
|
lru.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mp3_playback.c
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
panic.c
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
pcm.c
|
Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.
|
2009-02-08 22:32:41 +00:00 |
|
pcm_sampr.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
powermgmt.c
|
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).
|
2009-01-11 10:07:22 +00:00 |
|
profile.c
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
README
|
|
|
|
rolo.c
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
rom.lds
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
|
2008-04-29 06:19:32 +00:00 |
|
screendump.c
|
Forgot to add the new screendump source files.
|
2009-02-10 23:47:24 +00:00 |
|
scroll_engine.c
|
revert that scroll engine stuff... good in theory, but broken.
|
2008-07-02 13:02:57 +00:00 |
|
sound.c
|
Small binsize optimization and likely a tiny speedup too
|
2009-01-02 11:21:58 +00:00 |
|
SOURCES
|
Hopefully finally fix red .. (/me needs to cleanup his tree)
|
2009-02-19 22:33:55 +00:00 |
|
system.c
|
Remove struct spinlock to cleanup some mess and simplify. It's only used in boosting for multiprocesors and a pure two-corelock heirarchy will do just fine.
|
2009-02-03 12:16:45 +00:00 |
|
thread.c
|
s3c2440 can use the generic ARM WFI which is much simpler. If there's any advantage to setting the IDLE bit for power consumption, it's possible to combine its use with the old core_sleep instead of using the loop waiting for idle to kick in. For now, go basic. Let GCC choose the register for MCR instead of forcing it to r0.
|
2009-02-11 19:28:02 +00:00 |
|
timer.c
|
Gigabeat S: Get timer API working. metronome will work now.
|
2009-01-05 00:00:29 +00:00 |
|
tuner.c
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
usb.c
|
Only enable drivers if they exist. This should probably be handled differently to avoid #ifdef hell, but at least this way works
|
2009-02-21 01:07:46 +00:00 |
dff46d20e6