| .. |
|
archos/av300
|
|
|
|
as3525
|
Make some global function/variables local (by making them static)
|
2010-07-30 23:47:49 +00:00 |
|
at91sam
|
|
|
|
imx31
|
i.MX31: Make DMA ISR call loop a bit more efficient.
|
2010-06-30 07:08:10 +00:00 |
|
ipod
|
Add #include to power-ipod.c, make some variables static in storage.c
|
2010-07-31 10:59:22 +00:00 |
|
iriver
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
olympus
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
pbell
|
hdd6330: change the synaptics-mep driver in a few places according to the touchpad behavior.
|
2010-07-04 12:03:38 +00:00 |
|
philips
|
hdd6330: Enable buttonlights.
|
2010-07-04 12:48:46 +00:00 |
|
pnx0101
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
s3c2440
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
s5l8700
|
lcd-m6sp.c: remove \r
|
2010-06-25 13:32:57 +00:00 |
|
samsung
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
sandisk
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
tatung
|
|
|
|
tcc77x
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
tcc780x
|
D2: Fix another timing loop that broke when we switched to the EABI compiler, this time in the LCD driver.
|
2010-07-11 22:21:33 +00:00 |
|
tms320dm320
|
Various minor clean-ups for Zen Vision
|
2010-07-31 12:43:38 +00:00 |
|
adc-as3514.c
|
adc-as3514.c: cosmetics
|
2010-05-15 19:44:54 +00:00 |
|
adc-pp5020.c
|
|
|
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
ata-as-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
ata-nand-telechips.c
|
|
|
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
|
|
|
ata-sd-pp.c
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
ata-target.h
|
|
|
|
audio-pp.c
|
|
|
|
bits-armv4.S
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
bits-armv6.S
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
crt0-pp-bl.S
|
|
|
|
crt0-pp.S
|
ARM: use BX when branch to an address in register
|
2010-05-31 15:14:26 +00:00 |
|
crt0.S
|
arm/crt0.S: comment why the reset vector doesn't use absolute addressing
|
2010-06-18 18:31:14 +00:00 |
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
|
|
|
i2c-telechips.c
|
Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers.
|
2010-06-16 21:03:57 +00:00 |
|
i2s-pp.c
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
kernel-pp.c
|
|
|
|
lcd-as-memframe.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
lcd-c200_c200v2.c
|
udelay between command and data write seems to get rid of the display glitches on C200v2
|
2010-06-27 03:24:56 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memmove-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memset-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
memset16-arm.S
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
mmu-arm.h
|
|
|
|
mmu-arm.S
|
Update Samsung YP-S3 bootloader demo
|
2010-05-30 21:43:14 +00:00 |
|
mmu-armv6.S
|
|
|
|
pcm-pp.c
|
pcm-pp: revert r26756
|
2010-06-11 11:25:16 +00:00 |
|
pcm-telechips.c
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
powermgmt-ascodec.c
|
as3525v2: fix end of charge detection
|
2010-05-19 14:06:08 +00:00 |
|
sd-pp-target.h
|
|
|
|
support-arm.S
|
ARM: __div0() takes no argument
|
2010-06-12 17:15:39 +00:00 |
|
system-arm.c
|
__div0: give the address of the instruction calling division to UIE
|
2010-06-12 17:15:44 +00:00 |
|
system-arm.h
|
|
|
|
system-pp502x.c
|
|
|
|
system-pp5002.c
|
Squeeze down the PP5002 cache routines a bit.
|
2010-06-18 06:54:58 +00:00 |
|
system-target.h
|
|
|
|
thread-arm.c
|
FS#11335 by me: make ARM assembly functions thumb-friendly
|
2010-06-11 04:41:36 +00:00 |
|
thread-pp.c
|
For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions.
|
2010-06-18 03:10:18 +00:00 |
|
timer-pp.c
|
|
|
|
usb-drv-arc.c
|
|
|
|
usb-fw-pp502x.c
|
|
|
|
usb-fw-pp5002.c
|
|
|
|
usb-s3c6400x.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
usb-target.h
|
|
|
|
usb-tcc.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
wmcodec-pp.c
|
FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330
|
2010-06-19 03:51:57 +00:00 |
|
wmcodec-telechips.c
|
|
|
4a8ea6c9d9