Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525
History
Jack Halpin 48477f06bf AS3525v2: Set XPD to SD-MMC interface in sd_init() for HAVE_MULTIDRIVE. 
XPD was being switched between SD-MMC interface and general i/o functions in the sd_enable() function similar to as3525v1.
Since the as3525v2's do not seem to use XPD as general i/o there's no need to switch it back.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25497 a1c6a512-1295-4272-9138-f99709370657
2010-04-06 17:22:51 +00:00
..
sansa-c200v2 Implement software pwm to control c200v2 display brightness. 2010-03-23 05:27:32 +00:00
sansa-clip lcd-ssd1303 (all Clips) : move model specific code in their own files 2010-03-19 15:13:29 +00:00
sansa-clipplus Clip+: remove button_hold() : we use software hold 2010-04-01 17:24:14 +00:00
sansa-clipv2 Clipv2: read hold switch correctly 2010-04-03 22:33:47 +00:00
sansa-e200v2 Fix yellow. Another function unneeded in the bootloader. 2010-04-05 12:23:30 +00:00
sansa-fuze as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it. 2010-04-05 12:17:11 +00:00
sansa-fuzev2 as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it. 2010-04-05 12:17:11 +00:00
sansa-m200v4 Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled 2009-08-15 15:02:51 +00:00
adc-target.h
app.lds Revert unrelated part of r25491 : fuzev1 init code works again 2010-04-06 10:21:58 +00:00
ascodec-as3525.c Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet. 2010-03-23 11:13:17 +00:00
ascodec-target.h as3525v2: disable interrupts when writing to the PMU registers 2010-04-03 04:42:04 +00:00
audio-as3525.c fuzev2 FM doesn't work (yet), don't try to record from it 2010-03-29 23:10:00 +00:00
backlight-e200v2-fuze.c FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2) 2009-06-18 22:33:02 +00:00
boot.lds Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version. 2010-03-08 23:16:57 +00:00
button-e200v2-fuze.c Fuzev2: Scrollwheel works like a charm :) 2010-04-01 16:07:56 +00:00
clock-target.h Revert part of r25489 as it didn't fix the problem, that the CPU frequency debug screen shows the wrong frequency after boot, properly. 2010-04-05 19:20:56 +00:00
dbop-as3525.c Fuzev2: Reduce code duplication by reusing Fuzev1 code. 2010-04-05 12:01:44 +00:00
dbop-as3525.h Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
debug-as3525.c as3525v2: show the correct freqs in debug menu, CGU_PERI uses fclk as source 2010-04-05 15:22:36 +00:00
debug-target.h
dma-pl081.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
dma-target.h Add DMA line for SSP as used in Clip+ 2010-02-08 08:13:52 +00:00
fmradio-i2c-as3525.c Clip+: si4702 FM 2010-03-15 00:36:13 +00:00
i2s-as3525.c
kernel-as3525.c Fuzev2: Scrollwheel works like a charm :) 2010-04-01 16:07:56 +00:00
lcd-as-e200v2-fuze-fuzev2.S Add forgotten file (git was supposed to rename!). 2010-04-05 12:02:56 +00:00
lcd-ssd1303.c as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it. 2010-04-05 12:17:11 +00:00
pcm-as3525.c Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error) 2010-01-10 14:24:45 +00:00
power-as3525.c Sansa AMS: do not pretend we can power off the tuner 2010-03-05 01:43:47 +00:00
powermgmt-as3525.c
powermgmt-target.h Clipv2/Clip+ : use CHG_IN adc channel, it seems to work better than BVDD and RTCSUP 2010-03-31 01:22:23 +00:00
scrollwheel-as3525.c Fix someone elses yellow and red 2010-04-02 01:41:51 +00:00
sd-as3525.c sd-as3525: do not reverse 2 times long responses, read them directly in the needed order 2010-03-14 21:46:25 +00:00
sd-as3525v2.c AS3525v2: Set XPD to SD-MMC interface in sd_init() for HAVE_MULTIDRIVE. 2010-04-06 17:22:51 +00:00
system-as3525.c SansaAMS: Only use INT_MCIO with as3525v1, it is unused in as3525v2. 2010-04-06 17:22:45 +00:00
system-target.h ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future. 2009-07-05 01:17:25 +00:00
timer-as3525.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
usb-as3525.c Clipv2: reboot to OF when USB is inserted 2010-04-03 05:45:44 +00:00
usb-drv-as3525.c Clip+: enable sound on "as3514" (as3543 in fact) 2010-03-20 17:09:44 +00:00
usb-target.h Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet. 2010-03-23 11:13:17 +00:00