Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/ascodec-as3525.c
Tobias Diedrich 47ab95904e Add handler for audio irq. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25299 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 05:02:37 +00:00

499 lines
14 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Bertrik Sikken
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
Provides access to the codec/charger/rtc/adc part of the as3525.
This part is on address 0x46 of the internal i2c bus in the as3525.
Registers in the codec part seem to be nearly identical to the registers
in the AS3514 (used in the "v1" versions of the sansa c200 and e200).
I2C register description:
* I2C2_CNTRL needs to be set to 0x51 for transfers to work at all.
bit 0: ? possibly related to using ACKs during transfers
bit 1: direction of transfer (0 = write, 1 = read)
bit 2: use 2-byte slave address
* I2C2_IMR, I2C2_RIS, I2C2_MIS, I2C2_INT_CLR interrupt bits:
bit 2: byte read interrupt
bit 3: byte write interrupt
bit 4: ? possibly some kind of error status
bit 7: ACK error
* I2C2_SR (status register) indicates in bit 0 if a transfer is busy.
* I2C2_SLAD0 contains the i2c slave address to read from / write to.
* I2C2_CPSR0/1 is the divider from the peripheral clock to the i2c clock.
* I2C2_DACNT sets the number of bytes to transfer and actually starts it.
When a transfer is attempted to a non-existing i2c slave address,
interrupt bit 7 is raised and DACNT is not decremented after the transfer.
*/
#include "ascodec-target.h"
#include "clock-target.h"
#include "kernel.h"
#include "system.h"
#include "as3525.h"
#include "i2c.h"
#include "usb-target.h"
#define I2C2_DATA *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x00))
#define I2C2_SLAD0 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x04))
#define I2C2_CNTRL *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x0C))
#define I2C2_DACNT *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x10))
#define I2C2_CPSR0 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x1C))
#define I2C2_CPSR1 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x20))
#define I2C2_IMR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x24))
#define I2C2_RIS *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x28))
#define I2C2_MIS *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x2C))
#define I2C2_SR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x30))
#define I2C2_INT_CLR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x40))
#define I2C2_SADDR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x44))
#define I2C2_CNTRL_MASTER 0x01
#define I2C2_CNTRL_READ 0x02
#define I2C2_CNTRL_WRITE 0x00
#define I2C2_CNTRL_RESET 0x10
#define I2C2_CNTRL_REPSTARTEN 0x40
#define I2C2_CNTRL_DEFAULT (I2C2_CNTRL_MASTER|I2C2_CNTRL_REPSTARTEN|I2C2_CNTRL_RESET)
#define I2C2_IRQ_TXEMPTY 0x04
#define I2C2_IRQ_RXFULL 0x08
#define I2C2_IRQ_RXOVER 0x10
#define I2C2_IRQ_ACKTIMEO 0x80
#define REQ_UNFINISHED 0
#define REQ_FINISHED 1
#define REQ_RETRY 2
#ifdef DEBUG
#define IFDEBUG(x) x
#else
#define IFDEBUG(x)
#endif
static struct mutex as_mtx;
static int ascodec_enrd0_shadow = 0;
static unsigned char *req_data_ptr = NULL;
static struct ascodec_request *req_head = NULL;
static struct ascodec_request *req_tail = NULL;
static struct wakeup adc_wkup;
#ifdef DEBUG
static int int_audio_ctr = 0;
static int int_chg_finished = 0;
static int int_chg_insert = 0;
static int int_chg_remove = 0;
static int int_usb_insert = 0;
static int int_usb_remove = 0;
static int int_rtc = 0;
static int int_adc = 0;
#endif
static struct ascodec_request as_audio_req;
static void ascodec_start_req(struct ascodec_request *req);
static int ascodec_continue_req(struct ascodec_request *req, int irq_status);
static void ascodec_finish_req(struct ascodec_request *req);
static void ascodec_read_cb(unsigned const char *data, unsigned int len);
void INT_AUDIO(void)
{
VIC_INT_EN_CLEAR = INTERRUPT_AUDIO;
IFDEBUG(int_audio_ctr++);
ascodec_async_read(AS3514_IRQ_ENRD0, 3, &as_audio_req, ascodec_read_cb);
}
void INT_I2C_AUDIO(void)
{
int irq_status = I2C2_MIS;
int status = REQ_FINISHED;
if (req_head != NULL)
status = ascodec_continue_req(req_head, irq_status);
I2C2_INT_CLR |= irq_status; /* clear interrupt status */
if (status != REQ_UNFINISHED) {
/* mask rx/tx interrupts */
I2C2_IMR &= ~(I2C2_IRQ_TXEMPTY|I2C2_IRQ_RXFULL|
I2C2_IRQ_RXOVER|I2C2_IRQ_ACKTIMEO);
if (status == REQ_FINISHED)
ascodec_finish_req(req_head);
/*
* If status == REQ_RETRY, this will restart
* the request because we didn't remove it from
* the request list
*/
if (req_head)
ascodec_start_req(req_head);
}
}
void i2c_init(void)
{
}
/* initialises the internal i2c bus and prepares for transfers to the codec */
void ascodec_init(void)
{
int prescaler;
mutex_init(&as_mtx);
wakeup_init(&adc_wkup);
/* enable clock */
CGU_PERI |= CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE;
/* prescaler for i2c clock */
prescaler = AS3525_I2C_PRESCALER;
I2C2_CPSR0 = prescaler & 0xFF; /* 8 lsb */
I2C2_CPSR1 = (prescaler >> 8) & 0x3; /* 2 msb */
/* set i2c slave address of codec part */
I2C2_SLAD0 = AS3514_I2C_ADDR << 1;
I2C2_CNTRL = I2C2_CNTRL_DEFAULT;
I2C2_IMR = 0x00; /* disable interrupts */
I2C2_INT_CLR |= I2C2_RIS; /* clear interrupt status */
VIC_INT_ENABLE = INTERRUPT_I2C_AUDIO | INTERRUPT_AUDIO;
/* Generate irq for usb+charge status change */
ascodec_write(AS3514_IRQ_ENRD0, /*IRQ_CHGSTAT |*/ IRQ_USBSTAT);
/* Generate irq for push-pull, active high, irq on rtc+adc change */
ascodec_write(AS3514_IRQ_ENRD2, IRQ_PUSHPULL | IRQ_HIGHACTIVE |
/*IRQ_RTC |*/ IRQ_ADC);
}
/* returns != 0 when busy */
static int i2c_busy(void)
{
return (I2C2_SR & 1);
}
void ascodec_req_init(struct ascodec_request *req, int type,
unsigned int index, unsigned int cnt)
{
wakeup_init(&req->wkup);
req->next = NULL;
req->callback = NULL;
req->type = type;
req->index = index;
req->cnt = cnt;
}
void ascodec_submit(struct ascodec_request *req)
{
int oldlevel = disable_irq_save();
req->status = 0;
if (req_head == NULL) {
req_tail = req_head = req;
ascodec_start_req(req);
} else {
req_tail->next = req;
req_tail = req;
}
restore_irq(oldlevel);
}
static void ascodec_start_req(struct ascodec_request *req)
{
int unmask = 0;
/* enable clock */
CGU_PERI |= CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE;
/* start transfer */
I2C2_SADDR = req->index;
if (req->type == ASCODEC_REQ_READ) {
req_data_ptr = req->data;
/* start transfer */
I2C2_CNTRL = I2C2_CNTRL_DEFAULT | I2C2_CNTRL_READ;
unmask = I2C2_IRQ_RXFULL|I2C2_IRQ_RXOVER;
} else {
req_data_ptr = &req->data[1];
I2C2_CNTRL = I2C2_CNTRL_DEFAULT | I2C2_CNTRL_WRITE;
I2C2_DATA = req->data[0];
unmask = I2C2_IRQ_TXEMPTY|I2C2_IRQ_ACKTIMEO;
}
I2C2_DACNT = req->cnt;
I2C2_IMR |= unmask; /* enable interrupts */
}
static int ascodec_continue_req(struct ascodec_request *req, int irq_status)
{
if ((irq_status & (I2C2_IRQ_RXOVER|I2C2_IRQ_ACKTIMEO)) > 0) {
/* some error occured, restart the request */
return REQ_RETRY;
}
if (req->type == ASCODEC_REQ_READ &&
(irq_status & I2C2_IRQ_RXFULL) > 0) {
*(req_data_ptr++) = I2C2_DATA;
} else {
if (req->cnt > 1 &&
(irq_status & I2C2_IRQ_TXEMPTY) > 0) {
I2C2_DATA = *(req_data_ptr++);
}
}
req->index++;
if (--req->cnt > 0)
return REQ_UNFINISHED;
return REQ_FINISHED;
}
static void ascodec_finish_req(struct ascodec_request *req)
{
/*
* Wait if still busy, unfortunately this happens since
* the controller is running at a low divisor, so it's
* still busy when we serviced the interrupt.
* I tried upping the i2c speed to 4MHz which
* made the number of busywait cycles much smaller
* (none for reads and only a few for writes),
* but who knows if it's reliable at that frequency. ;)
* For one thing, 8MHz doesn't work, so 4MHz is likely
* borderline.
* In general writes need much more wait cycles than reads
* for some reason, possibly because we read the data register
* for reads, which will likely block the processor while
* the i2c controller responds to the register read.
*/
while (i2c_busy());
/* disable clock */
CGU_PERI &= ~CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE;
req->status = 1;
if (req->callback) {
req->callback(req->data, req_data_ptr - req->data);
}
wakeup_signal(&req->wkup);
req_head = req->next;
req->next = NULL;
if (req_head == NULL)
req_tail = NULL;
}
static int irq_disabled(void)
{
unsigned long cpsr;
asm volatile ("mrs %0, cpsr" : "=r"(cpsr));
return (cpsr & IRQ_STATUS) == IRQ_DISABLED;
}
static void ascodec_wait(struct ascodec_request *req)
{
if (!irq_disabled()) {
wakeup_wait(&req->wkup, TIMEOUT_BLOCK);
return;
}
while (req->status == 0) {
if (I2C2_MIS) INT_I2C_AUDIO();
}
}
/*
* The request struct passed in must be allocated statically.
* If you call ascodec_async_write from different places, each
* call needs it's own request struct.
* This comment is duplicated in .c and .h for your convenience.
*/
void ascodec_async_write(unsigned int index, unsigned int value,
struct ascodec_request *req)
{
switch(index) {
case AS3514_CVDD_DCDC3:
/* prevent setting of the LREG_CP_not bit */
value &= ~(1 << 5);
break;
case AS3514_IRQ_ENRD0:
/* save value in register shadow
* for ascodec_(en|dis)able_endofch_irq() */
ascodec_enrd0_shadow = value;
break;
default:
break;
}
ascodec_req_init(req, ASCODEC_REQ_WRITE, index, 1);
req->data[0] = value;
ascodec_submit(req);
}
/* returns 0 on success, <0 otherwise */
int ascodec_write(unsigned int index, unsigned int value)
{
struct ascodec_request req;
ascodec_async_write(index, value, &req);
ascodec_wait(&req);
return 0;
}
/*
* The request struct passed in must be allocated statically.
* If you call ascodec_async_read from different places, each
* call needs it's own request struct.
* If len is bigger than ASCODEC_REQ_MAXLEN it will be
* set to ASCODEC_REQ_MAXLEN.
* This comment is duplicated in .c and .h for your convenience.
*/
void ascodec_async_read(unsigned int index, unsigned int len,
struct ascodec_request *req, ascodec_cb_fn *cb)
{
if (len > ASCODEC_REQ_MAXLEN)
len = ASCODEC_REQ_MAXLEN; /* can't fit more in one request */
ascodec_req_init(req, ASCODEC_REQ_READ, index, len);
req->callback = cb;
ascodec_submit(req);
}
/* returns value read on success, <0 otherwise */
int ascodec_read(unsigned int index)
{
struct ascodec_request req;
ascodec_async_read(index, 1, &req, NULL);
ascodec_wait(&req);
return req.data[0];
}
int ascodec_readbytes(unsigned int index, unsigned int len, unsigned char *data)
{
int i, j;
struct ascodec_request req;
/* index and cnt will be filled in later, just use 0 */
ascodec_req_init(&req, ASCODEC_REQ_READ, 0, 0);
i = 0;
while (len > 0) {
int cnt = len > ASCODEC_REQ_MAXLEN ? ASCODEC_REQ_MAXLEN : len;
req.index = index;
req.cnt = cnt;
ascodec_submit(&req);
ascodec_wait(&req);
for (j=0; j<cnt; j++) data[i++] = req.data[j];
len -= cnt;
index += cnt;
}
return i;
}
static void ascodec_read_cb(unsigned const char *data, unsigned int len)
{
if (len != 3) /* some error happened? */
return;
if (data[0] & CHG_ENDOFCH) { /* chg finished */
IFDEBUG(int_chg_finished++);
}
if (data[0] & CHG_CHANGED) { /* chg status changed */
if (data[0] & CHG_STATUS) {
IFDEBUG(int_chg_insert++);
} else {
IFDEBUG(int_chg_remove++);
}
}
if (data[0] & USB_CHANGED) { /* usb status changed */
if (data[0] & USB_STATUS) {
IFDEBUG(int_usb_insert++);
usb_insert_int();
} else {
IFDEBUG(int_usb_remove++);
usb_remove_int();
}
}
if (data[2] & IRQ_RTC) { /* rtc irq */
/*
* Can be configured for once per second or once per minute,
* default is once per second
*/
IFDEBUG(int_rtc++);
}
if (data[2] & IRQ_ADC) { /* adc finished */
IFDEBUG(int_adc++);
wakeup_signal(&adc_wkup);
}
VIC_INT_ENABLE = INTERRUPT_AUDIO;
}
void ascodec_wait_adc_finished(void)
{
wakeup_wait(&adc_wkup, TIMEOUT_BLOCK);
}
void ascodec_enable_endofch_irq(void)
{
ascodec_write(AS3514_IRQ_ENRD0, ascodec_enrd0_shadow | CHG_ENDOFCH);
}
void ascodec_disable_endofch_irq(void)
{
ascodec_write(AS3514_IRQ_ENRD0, ascodec_enrd0_shadow & ~CHG_ENDOFCH);
}
/*
* NOTE:
* After the conversion to interrupts, ascodec_(lock|unlock) are only used by
* adc-as3514.c to protect against other threads corrupting the result by using
* the ADC at the same time.
* Concurrent ascodec_(async_)?(read|write) calls are instead protected
* because ascodec_submit() is atomic and concurrent requests will wait
* in the queue until the current request is finished.
*/
void ascodec_lock(void)
{
mutex_lock(&as_mtx);
}
void ascodec_unlock(void)
{
mutex_unlock(&as_mtx);
}
/* vim:set ts=4 sw=4 et: */
Reference in a new issue View git blame Copy permalink