rockbox/firmware/export/config/sonynwzlinux.h
Solomon Peachy 6a94f1e995 sonynwz: Properly support multidrive, with hotswap of the SD card
Change-Id: I7eb8efb0986a395d5ffbcc06a54bb680e0b59e9d
2020-10-18 10:19:42 -04:00

129 lines
3.6 KiB
C

/*
* This config file is for the Sony NWZ Linux based targets
*/
#ifndef SIMULATOR
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
#define PIVOT_ROOT "/contents"
#endif
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* Define this if the LCD can shut down */
#define HAVE_LCD_SHUTDOWN
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
#define LCD_DEPTH 16
/* Check that but should not matter */
#define LCD_PIXELFORMAT RGB565
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults: the backlight driver only
* has levels from 0 to 5. But 0 is off so start at 1. The driver has configurable
* periods for fade in/out but we can't easily export that to Rockbox */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 5
#define DEFAULT_BRIGHTNESS_SETTING 4
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a real-time clock */
#define CONFIG_RTC 0
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000
#define CONFIG_TUNER SI4700
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
/* The A15 and A25 support more sampling rates, in fact they support crazy high bit-rates such
* as 176.4 and 192 kHz but Rockbox does not support those */
#if defined(SONY_NWZA10) || defined(SONY_NWA20)
#define HW_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_48 | SAMPR_CAP_88 | SAMPR_CAP_96)
#endif
/* KeyPad configuration for plugins */
#define CONFIG_KEYPAD SONY_NWZ_PAD
#define HAS_BUTTON_HOLD
/** Non-simulator section **/
#ifndef SIMULATOR
/* We have usb power and can detect usb but it is handled by Linux */
#define HAVE_USB_POWER
#define USB_NONE
/* Audio codec */
#define HAVE_NWZ_LINUX_CODEC
#endif /* SIMULATOR */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Linux controlls charging, we can monitor */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* same dimensions as gigabeats */
#define CONFIG_LCD LCD_NWZ_LINUX
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Define this to the CPU frequency */
#define CPU_FREQ 532000000
#ifdef NWZ_HAS_SD
/* External SD card can be mounted */
#define CONFIG_STORAGE (STORAGE_HOSTFS|STORAGE_SD)
#define HAVE_MULTIDRIVE /* But _not_ CONFIG_STORAGE_MULTI */
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
#define MULTIDRIVE_DIR "/mnt/media"
#define MULTIDRIVE_DEV "/sys/block/mmcblk1"
#else
/* No special storage */
#define CONFIG_STORAGE STORAGE_HOSTFS
#endif
#define HAVE_STORAGE_FLUSH
/* Battery */
#define BATTERY_TYPES_COUNT 1
/* special define to be use in various places */
#define SONY_NWZ_LINUX
/* Battery */
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 600 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */