rockbox/firmware/export/config-player.h
Frank Gevaerts 46573019a5 add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18735 a1c6a512-1295-4272-9138-f99709370657
2008-10-07 19:37:33 +00:00

103 lines
2.9 KiB
C

/* define this if you use an ATA controller */
#define HAVE_ATA
#define MODEL_NAME "Archos Player/Studio"
/* define this if you have a charcell LCD display */
#define HAVE_LCD_CHARCELLS
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
#define LCD_WIDTH 11
#define LCD_HEIGHT 2
#define LCD_DEPTH 1
#define SIM_LCD_WIDTH 132 /* pixels */
#define SIM_LCD_HEIGHT 64 /* pixels */
/* define this if you have the Player's keyboard */
#define CONFIG_KEYPAD PLAYER_PAD
#define AB_REPEAT_ENABLE 1
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x8000
/* Define this if you have a MAS3507D */
#define CONFIG_CODEC MAS3507D
/* Define this if you have a DAC3550A */
#define HAVE_DAC3550A
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
#ifndef SIMULATOR
/* Define this if you have a SH7034 */
#define CONFIG_CPU SH7034
/* Uncomment this if you want to enable ATA power-off control.
* Attention, some players crash when ATA power-off is enabled! */
//#define HAVE_ATA_POWER_OFF
/* Define this if you control ata power player style
(with PB4, new player only) */
#define ATA_POWER_PLAYERSTYLE
/* Define this to the CPU frequency */
#define CPU_FREQ 12000000 /* cycle time ~83.3ns */
/* Define this if you must discharge the data line by driving it low
and then set it to input to see if it stays low or goes high */
#define HAVE_I2C_LOW_FIRST
#define CONFIG_I2C I2C_PLAYREC
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 4
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 6
/* The start address index for ROM builds */
/* #define ROM_START 0xD010 for behind original Archos */
#define ROM_START 0x6010 /* for behind BootBox */
/* Software controlled LED */
#define CONFIG_LED LED_REAL
#define CONFIG_LCD LCD_SSD1801
#define BOOTFILE_EXT "mod"
#define BOOTFILE "archos." BOOTFILE_EXT
#define BOOTDIR "/"
#endif /* SIMULATOR */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 31
#define DEFAULT_CONTRAST_SETTING 30