369 lines
12 KiB
C
369 lines
12 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright © 2011 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "clkctrl-imx233.h"
|
|
#include "string.h"
|
|
#include "debug.h"
|
|
|
|
void imx233_clkctrl_enable(enum imx233_clock_t clk, bool enable)
|
|
{
|
|
/* NOTE some registers like HW_CLKCTRL_PIX don't have a CLR/SET variant ! */
|
|
bool gate = !enable;
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: BF_WR(CLKCTRL_PIX, CLKGATE, gate); break;
|
|
#endif
|
|
case CLK_SSP: BF_WR(CLKCTRL_SSP, CLKGATE, gate); break;
|
|
case CLK_DRI: BF_WR(CLKCTRL_XTAL, DRI_CLK24M_GATE, gate); break;
|
|
case CLK_PWM: BF_WR(CLKCTRL_XTAL, PWM_CLK24M_GATE, gate); break;
|
|
case CLK_UART: BF_WR(CLKCTRL_XTAL, UART_CLK_GATE, gate); break;
|
|
case CLK_FILT: BF_WR(CLKCTRL_XTAL, FILT_CLK24M_GATE, gate); break;
|
|
case CLK_TIMROT: BF_WR(CLKCTRL_XTAL, TIMROT_CLK32K_GATE, gate); break;
|
|
case CLK_PLL:
|
|
/* pll is a special case */
|
|
if(enable)
|
|
{
|
|
BF_SET(CLKCTRL_PLLCTRL0, POWER);
|
|
while(!BF_RD(CLKCTRL_PLLCTRL1, LOCK));
|
|
}
|
|
else
|
|
BF_CLR(CLKCTRL_PLLCTRL0, POWER);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#undef handle_std
|
|
#undef handle_xtal
|
|
}
|
|
|
|
bool imx233_clkctrl_is_enabled(enum imx233_clock_t clk)
|
|
{
|
|
switch(clk)
|
|
{
|
|
case CLK_PLL: return BF_RD(CLKCTRL_PLLCTRL0, POWER);
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: return !BF_RD(CLKCTRL_PIX, CLKGATE);
|
|
#endif
|
|
case CLK_SSP: return !BF_RD(CLKCTRL_SSP, CLKGATE);
|
|
case CLK_DRI: return !BF_RD(CLKCTRL_XTAL, DRI_CLK24M_GATE);
|
|
case CLK_PWM: return !BF_RD(CLKCTRL_XTAL, PWM_CLK24M_GATE);
|
|
case CLK_UART: return !BF_RD(CLKCTRL_XTAL, UART_CLK_GATE);
|
|
case CLK_FILT: return !BF_RD(CLKCTRL_XTAL, FILT_CLK24M_GATE);
|
|
case CLK_TIMROT: return !BF_RD(CLKCTRL_XTAL, TIMROT_CLK32K_GATE);
|
|
default: return true;
|
|
}
|
|
}
|
|
|
|
void imx233_clkctrl_set_div(enum imx233_clock_t clk, int div)
|
|
{
|
|
/* warning: some registers like HW_CLKCTRL_PIX don't have a CLR/SET variant !
|
|
* assume that we always derive emi and cpu from ref_XX */
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: BF_WR(CLKCTRL_PIX, DIV, div); break;
|
|
case CLK_CPU: BF_WR(CLKCTRL_CPU, DIV_CPU, div); break;
|
|
case CLK_EMI: BF_WR(CLKCTRL_EMI, DIV_EMI, div); break;
|
|
#else
|
|
case CLK_CPU: BF_WR(CLKCTRL_CPU, DIV, div); break;
|
|
case CLK_EMI: BF_WR(CLKCTRL_EMI, DIV, div); break;
|
|
#endif
|
|
case CLK_SSP: BF_WR(CLKCTRL_SSP, DIV, div); break;
|
|
case CLK_HBUS: BF_WR(CLKCTRL_HBUS, DIV, div); break;
|
|
case CLK_XBUS: BF_WR(CLKCTRL_XBUS, DIV, div); break;
|
|
default: return;
|
|
}
|
|
}
|
|
|
|
int imx233_clkctrl_get_div(enum imx233_clock_t clk)
|
|
{
|
|
/* assume that we always derive emi and cpu from ref_XX */
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: return BF_RD(CLKCTRL_PIX, DIV);
|
|
case CLK_CPU: return BF_RD(CLKCTRL_CPU, DIV_CPU);
|
|
case CLK_EMI: return BF_RD(CLKCTRL_EMI, DIV_EMI);
|
|
#else
|
|
case CLK_CPU: return BF_RD(CLKCTRL_CPU, DIV);
|
|
case CLK_EMI: return BF_RD(CLKCTRL_EMI, DIV);
|
|
#endif
|
|
case CLK_SSP: return BF_RD(CLKCTRL_SSP, DIV);
|
|
case CLK_HBUS: return BF_RD(CLKCTRL_HBUS, DIV);
|
|
case CLK_XBUS: return BF_RD(CLKCTRL_XBUS, DIV);
|
|
default: return 0;
|
|
}
|
|
}
|
|
|
|
#if IMX233_SUBTARGET >= 3700
|
|
void imx233_clkctrl_set_frac_div(enum imx233_clock_t clk, int fracdiv)
|
|
{
|
|
#define handle_frac(dev) \
|
|
case CLK_##dev: \
|
|
if(fracdiv == 0) \
|
|
BF_SET(CLKCTRL_FRAC, CLKGATE##dev); \
|
|
else { \
|
|
BF_WR(CLKCTRL_FRAC, dev##FRAC, fracdiv); \
|
|
BF_CLR(CLKCTRL_FRAC, CLKGATE##dev); } \
|
|
break;
|
|
switch(clk)
|
|
{
|
|
handle_frac(PIX)
|
|
handle_frac(IO)
|
|
handle_frac(CPU)
|
|
handle_frac(EMI)
|
|
default: break;
|
|
}
|
|
#undef handle_frac
|
|
}
|
|
|
|
int imx233_clkctrl_get_frac_div(enum imx233_clock_t clk)
|
|
{
|
|
#define handle_frac(dev) \
|
|
case CLK_##dev:\
|
|
if(BF_RD(CLKCTRL_FRAC, CLKGATE##dev)) \
|
|
return 0; \
|
|
else \
|
|
return BF_RD(CLKCTRL_FRAC, dev##FRAC);
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
handle_frac(PIX)
|
|
#endif
|
|
handle_frac(IO)
|
|
handle_frac(CPU)
|
|
handle_frac(EMI)
|
|
default: return 0;
|
|
}
|
|
#undef handle_frac
|
|
}
|
|
|
|
void imx233_clkctrl_set_bypass(enum imx233_clock_t clk, bool bypass)
|
|
{
|
|
uint32_t msk;
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: msk = BM_CLKCTRL_CLKSEQ_BYPASS_PIX; break;
|
|
#endif
|
|
case CLK_SSP: msk = BM_CLKCTRL_CLKSEQ_BYPASS_SSP; break;
|
|
case CLK_CPU: msk = BM_CLKCTRL_CLKSEQ_BYPASS_CPU; break;
|
|
case CLK_EMI: msk = BM_CLKCTRL_CLKSEQ_BYPASS_EMI; break;
|
|
default: return;
|
|
}
|
|
|
|
if(bypass)
|
|
HW_CLKCTRL_CLKSEQ_SET = msk;
|
|
else
|
|
HW_CLKCTRL_CLKSEQ_CLR = msk;
|
|
}
|
|
|
|
bool imx233_clkctrl_get_bypass(enum imx233_clock_t clk)
|
|
{
|
|
switch(clk)
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX: return BF_RD(CLKCTRL_CLKSEQ, BYPASS_PIX);
|
|
#endif
|
|
case CLK_SSP: return BF_RD(CLKCTRL_CLKSEQ, BYPASS_SSP);
|
|
case CLK_CPU: return BF_RD(CLKCTRL_CLKSEQ, BYPASS_CPU);
|
|
case CLK_EMI: return BF_RD(CLKCTRL_CLKSEQ, BYPASS_EMI);
|
|
default: return false;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void imx233_clkctrl_enable_usb(bool enable)
|
|
{
|
|
if(enable)
|
|
BF_SET(CLKCTRL_PLLCTRL0, EN_USB_CLKS);
|
|
else
|
|
BF_CLR(CLKCTRL_PLLCTRL0, EN_USB_CLKS);
|
|
}
|
|
|
|
bool imx233_clkctrl_is_usb_enabled(void)
|
|
{
|
|
return BF_RD(CLKCTRL_PLLCTRL0, EN_USB_CLKS);
|
|
}
|
|
|
|
void imx233_clkctrl_set_auto_slow_div(unsigned div)
|
|
{
|
|
/* the SLOW_DIV must only be set when auto-slow is disabled */
|
|
bool old_status = imx233_clkctrl_is_auto_slow_enabled();
|
|
imx233_clkctrl_enable_auto_slow(false);
|
|
BF_WR(CLKCTRL_HBUS, SLOW_DIV, div);
|
|
imx233_clkctrl_enable_auto_slow(old_status);
|
|
}
|
|
|
|
unsigned imx233_clkctrl_get_auto_slow_div(void)
|
|
{
|
|
return BF_RD(CLKCTRL_HBUS, SLOW_DIV);
|
|
}
|
|
|
|
void imx233_clkctrl_enable_auto_slow(bool enable)
|
|
{
|
|
/* NOTE: don't use SET/CLR because it doesn't exist on stmp3600 */
|
|
BF_WR(CLKCTRL_HBUS, AUTO_SLOW_MODE, enable);
|
|
}
|
|
|
|
bool imx233_clkctrl_is_auto_slow_enabled(void)
|
|
{
|
|
return BF_RD(CLKCTRL_HBUS, AUTO_SLOW_MODE);
|
|
}
|
|
|
|
unsigned imx233_clkctrl_get_freq(enum imx233_clock_t clk)
|
|
{
|
|
switch(clk)
|
|
{
|
|
case CLK_PLL: /* PLL: 480MHz when enable */
|
|
return imx233_clkctrl_is_enabled(CLK_PLL) ? 480000 : 0;
|
|
case CLK_XTAL: /* crystal: 24MHz */
|
|
return 24000;
|
|
case CLK_CPU:
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
unsigned ref;
|
|
/* In bypass mode: clk_p derived from clk_xtal via int/binfrac divider
|
|
* otherwise, clk_p derived from clk_cpu via int div and clk_cpu
|
|
* derived from clk_pll fracdiv */
|
|
if(imx233_clkctrl_get_bypass(CLK_CPU))
|
|
{
|
|
ref = imx233_clkctrl_get_freq(CLK_XTAL);
|
|
/* Integer divide mode vs fractional divide mode */
|
|
if(BF_RD(CLKCTRL_CPU, DIV_XTAL_FRAC_EN))
|
|
|
|
return (ref * BF_RD(CLKCTRL_CPU, DIV_XTAL)) / 32;
|
|
else
|
|
return ref / imx233_clkctrl_get_div(CLK_CPU);
|
|
}
|
|
else
|
|
{
|
|
ref = imx233_clkctrl_get_freq(CLK_PLL);
|
|
/* fractional divider enable ? */
|
|
if(imx233_clkctrl_get_frac_div(CLK_CPU) != 0)
|
|
ref = (ref * 18) / imx233_clkctrl_get_frac_div(CLK_CPU);
|
|
return ref / imx233_clkctrl_get_div(CLK_CPU);
|
|
}
|
|
#else
|
|
return imx233_clkctrl_get_freq(CLK_PLL) / imx233_clkctrl_get_div(CLK_CPU);
|
|
#endif
|
|
}
|
|
case CLK_HBUS:
|
|
{
|
|
/* Derived from clk_p via integer/fractional div */
|
|
unsigned ref = imx233_clkctrl_get_freq(CLK_CPU);
|
|
#if IMX233_SUBTARGET >= 3700
|
|
if(imx233_clkctrl_get_frac_div(CLK_HBUS) != 0)
|
|
ref = (ref * imx233_clkctrl_get_frac_div(CLK_HBUS)) / 32;
|
|
#endif
|
|
if(imx233_clkctrl_get_div(CLK_HBUS) != 0)
|
|
ref /= imx233_clkctrl_get_div(CLK_HBUS);
|
|
return ref;
|
|
}
|
|
case CLK_IO:
|
|
{
|
|
/* Derived from clk_pll via fracdiv */
|
|
unsigned ref = imx233_clkctrl_get_freq(CLK_PLL);
|
|
#if IMX233_SUBTARGET >= 3700
|
|
if(imx233_clkctrl_get_frac_div(CLK_IO) != 0)
|
|
ref = (ref * 18) / imx233_clkctrl_get_frac_div(CLK_IO);
|
|
#endif
|
|
return ref;
|
|
}
|
|
#if IMX233_SUBTARGET >= 3700
|
|
case CLK_PIX:
|
|
{
|
|
unsigned ref;
|
|
/* Derived from clk_pll or clk_xtal */
|
|
if(!imx233_clkctrl_is_enabled(CLK_PIX))
|
|
ref = 0;
|
|
else if(imx233_clkctrl_get_bypass(CLK_PIX))
|
|
ref = imx233_clkctrl_get_freq(CLK_XTAL);
|
|
else
|
|
{
|
|
ref = imx233_clkctrl_get_freq(CLK_PLL);
|
|
if(imx233_clkctrl_get_frac_div(CLK_PIX) != 0)
|
|
ref = (ref * 18) / imx233_clkctrl_get_frac_div(CLK_PIX);
|
|
}
|
|
return ref / imx233_clkctrl_get_div(CLK_PIX);
|
|
}
|
|
#endif
|
|
case CLK_SSP:
|
|
{
|
|
unsigned ref;
|
|
/* Derived from clk_pll or clk_xtal */
|
|
if(!imx233_clkctrl_is_enabled(CLK_SSP))
|
|
ref = 0;
|
|
#if IMX233_SUBTARGET >= 3700
|
|
else if(imx233_clkctrl_get_bypass(CLK_SSP))
|
|
ref = imx233_clkctrl_get_freq(CLK_XTAL);
|
|
else
|
|
#endif
|
|
ref = imx233_clkctrl_get_freq(CLK_IO);
|
|
return ref / imx233_clkctrl_get_div(CLK_SSP);
|
|
}
|
|
case CLK_EMI:
|
|
{
|
|
#if IMX233_SUBTARGET >= 3700
|
|
unsigned ref;
|
|
/* Derived from clk_pll or clk_xtal */
|
|
if(imx233_clkctrl_get_bypass(CLK_EMI))
|
|
{
|
|
ref = imx233_clkctrl_get_freq(CLK_XTAL);
|
|
if(BF_RD(CLKCTRL_EMI, CLKGATE))
|
|
return 0;
|
|
else
|
|
return ref / BF_RD(CLKCTRL_EMI, DIV_XTAL);
|
|
}
|
|
else
|
|
{
|
|
ref = imx233_clkctrl_get_freq(CLK_PLL);
|
|
if(imx233_clkctrl_get_frac_div(CLK_EMI) != 0)
|
|
ref = (ref * 18) / imx233_clkctrl_get_frac_div(CLK_EMI);
|
|
return ref / imx233_clkctrl_get_div(CLK_EMI);
|
|
}
|
|
#else
|
|
return imx233_clkctrl_get_freq(CLK_PLL) / imx233_clkctrl_get_div(CLK_EMI);
|
|
#endif
|
|
}
|
|
case CLK_XBUS:
|
|
return imx233_clkctrl_get_freq(CLK_XTAL) / imx233_clkctrl_get_div(CLK_XBUS);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
void imx233_clkctrl_init(void)
|
|
{
|
|
/* set auto-slow monitor to all */
|
|
#if IMX233_SUBTARGET >= 3700
|
|
HW_CLKCTRL_HBUS_SET = BF_OR6(CLKCTRL_HBUS,
|
|
APBHDMA_AS_ENABLE(1), TRAFFIC_JAM_AS_ENABLE(1), TRAFFIC_AS_ENABLE(1),
|
|
APBXDMA_AS_ENABLE(1), CPU_INSTR_AS_ENABLE(1), CPU_DATA_AS_ENABLE(1));
|
|
#else
|
|
HW_CLKCTRL_HBUS = HW_CLKCTRL_HBUS | BF_OR7(CLKCTRL_HBUS, EMI_BUSY_FAST(1),
|
|
APBHDMA_BUSY_FAST(1), APBXDMA_BUSY_FAST(1), TRAFFIC_JAM_FAST(1),
|
|
TRAFFIC_FAST(1), CPU_DATA_FAST(1), CPU_INSTR_FAST(1));
|
|
#endif
|
|
#if IMX233_SUBTARGET >= 3780
|
|
HW_CLKCTRL_HBUS_SET = BF_OR2(CLKCTRL_HBUS, DCP_AS_ENABLE(1), PXP_AS_ENABLE(1));
|
|
#endif
|
|
}
|