0b6198f8a8
The current driver only works in PIO mode. Change-Id: I1cf2eaedcce0172a254c3bab0e1257886226d3a0
78 lines
2.6 KiB
C
78 lines
2.6 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2013 Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef ATA_TARGET_H
|
|
#define ATA_TARGET_H
|
|
|
|
#include "config.h"
|
|
|
|
#ifdef BOOTLOADER
|
|
#define ATA_DRIVER_CLOSE
|
|
#endif
|
|
|
|
#ifdef HAVE_ATA_DMA
|
|
/* FIXME does this chips does MWDMA ? */
|
|
#define ATA_MAX_MWDMA 2
|
|
#define ATA_MAX_UDMA 4
|
|
#endif
|
|
|
|
uint8_t imx233_ata_inb(unsigned reg);
|
|
uint16_t imx233_ata_inw(unsigned reg);
|
|
void imx233_ata_outb(unsigned reg, uint8_t v);
|
|
void imx233_ata_outw(unsigned reg, uint16_t v);
|
|
|
|
#define IMX233_ATA_REG(cs,addr) ((cs) << 3 | (addr))
|
|
#define IMX233_ATA_REG_CS(reg) ((reg) >> 3)
|
|
#define IMX233_ATA_REG_ADDR(reg) ((reg) & 0x7)
|
|
/* use register address (see ATA spec) */
|
|
#define ATA_DATA IMX233_ATA_REG(0, 0)
|
|
#define ATA_ERROR IMX233_ATA_REG(0, 1)
|
|
#define ATA_NSECTOR IMX233_ATA_REG(0, 2)
|
|
#define ATA_SECTOR IMX233_ATA_REG(0, 3)
|
|
#define ATA_LCYL IMX233_ATA_REG(0, 4)
|
|
#define ATA_HCYL IMX233_ATA_REG(0, 5)
|
|
#define ATA_SELECT IMX233_ATA_REG(0, 6)
|
|
#define ATA_COMMAND IMX233_ATA_REG(0, 7)
|
|
#define ATA_CONTROL IMX233_ATA_REG(1, 6)
|
|
|
|
/* keep consistent with definition of IMX233_ATA_REG */
|
|
#define ATA_OUT8(reg, data) imx233_ata_outb(reg, data)
|
|
#define ATA_OUT16(reg, data) imx233_ata_outw(reg, data)
|
|
#define ATA_IN8(reg) imx233_ata_inb(reg)
|
|
#define ATA_IN16(reg) imx233_ata_inw(reg)
|
|
|
|
#define ATA_SET_PIO_TIMING
|
|
|
|
#define ATA_TARGET_POLLING
|
|
|
|
void ata_set_pio_timings(int mode);
|
|
void ata_reset(void);
|
|
void ata_enable(bool on);
|
|
bool ata_is_coldstart(void);
|
|
#ifdef HAVE_ATA_DMA
|
|
void ata_dma_set_mode(unsigned char mode);
|
|
bool ata_dma_setup(void *addr, unsigned long bytes, bool write);
|
|
bool ata_dma_finish(void);
|
|
#endif
|
|
int ata_wait_for_bsy(void);
|
|
int ata_wait_for_rdy(void);
|
|
void ata_device_init(void);
|
|
|
|
#endif /* ATA_TARGET_H */
|