.. |
sansa-c200v2
|
Sansa AMS: Various fixes/enhancements for clock frequencies
|
2009-05-13 08:27:20 +00:00 |
sansa-clip
|
Sansa Clip : ignore previous setting of CGU_DBOP (do not use ORR)
|
2009-05-19 14:43:26 +00:00 |
sansa-e200v2
|
Sansa AMS: Various fixes/enhancements for clock frequencies
|
2009-05-13 08:27:20 +00:00 |
sansa-fuze
|
Sansa AMS: Various fixes/enhancements for clock frequencies
|
2009-05-13 08:27:20 +00:00 |
sansa-m200v4
|
Remove unnecessary #include "adc.h"
|
2009-04-25 22:24:59 +00:00 |
adc-target.h
|
Sansa AMS: use the AS3514 ADC driver
|
2008-11-10 20:55:56 +00:00 |
app.lds
|
Sansa AMS: Centralise mapping of RAM and IRAM in as3525.h via #defines. This will hopefully make ongoing mmu work easier as less places need to be changed.
|
2009-05-20 21:09:53 +00:00 |
ascodec-as3525.c
|
Sansa AMS i2c : fix 2 problems identified by Jack Halpin & Bertrik Sikken
|
2009-05-14 09:36:56 +00:00 |
ascodec-target.h
|
Sansa AMS: declare ascodec_init() function in the header
|
2008-11-10 20:59:10 +00:00 |
ata_sd_as3525.c
|
Sansa AMS: move OF size declaration in model specific config
|
2009-05-21 11:46:52 +00:00 |
audio-as3525.c
|
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
|
2009-02-05 19:57:18 +00:00 |
backlight-e200v2-fuze.c
|
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
|
2009-04-26 01:23:39 +00:00 |
boot.lds
|
Sansa AMS: Centralise mapping of RAM and IRAM in as3525.h via #defines. This will hopefully make ongoing mmu work easier as less places need to be changed.
|
2009-05-20 21:09:53 +00:00 |
clock-target.h
|
Sansa AMS: Partly revert r20923 (reset IDE maximal freq to 90MHz to fix problems with some players)
|
2009-05-21 11:46:36 +00:00 |
debug-as3525.c
|
Sansa AMS: show correct clock speeds for NAND & SD card
|
2009-05-21 17:35:56 +00:00 |
debug-target.h
|
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
|
2009-02-17 02:36:48 +00:00 |
dma-pl081.c
|
Patch by Rafaël Carré - Sansa AMS: Fix a few mistakes in DMA code
|
2009-04-07 17:08:26 +00:00 |
dma-target.h
|
Sansa AMS : use SD controller status to notify end of data transfer
|
2009-01-08 08:27:42 +00:00 |
fmradio-i2c-as3525.c
|
Enable FM radio on the sansa c200v2 (untested).
|
2009-04-26 21:28:34 +00:00 |
i2s-as3525.c
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
kernel-as3525.c
|
Few Fuze/e200v2 button fixes. Don't read the scrollwheel when the hold button is active and rename a variable to describe better what it is for.
|
2009-04-13 17:10:52 +00:00 |
lcd-as-e200v2-fuze.S
|
FS#10118 & FS#10165 : lcd_blit_yuv() for Sansa Fuze & Sansa e200v2
|
2009-05-12 13:22:39 +00:00 |
pcm-as3525.c
|
Patch by Rafaël Carré - Sansa AMS : inform pcm.c when playback stopped, use pcm_play_dma_stopped_callback()
|
2009-04-07 17:11:55 +00:00 |
power-as3525.c
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
powermgmt-as3525.c
|
Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.
|
2008-11-23 15:00:44 +00:00 |
powermgmt-target.h
|
FS#9968: Charging on e200v2
|
2009-03-22 19:06:54 +00:00 |
system-as3525.c
|
commit FS#10092 (cleanup AMS system init) by Rafaël Carré.
|
2009-04-07 16:14:01 +00:00 |
system-target.h
|
Sansa AMS: centralize clock settings in clock-target.h
|
2008-12-04 20:04:31 +00:00 |
timer-target.h
|
Sansa AMS: correct timer definition (clk_main == 24MHz / 16)
|
2008-11-26 14:40:57 +00:00 |
usb-as3525.c
|
Fix #includes in usb-as3525.c
|
2009-04-12 19:08:26 +00:00 |