rockbox/firmware/target/arm/imx233/creative-zenxfi3/audio-zenxfi3.c
Amaury Pouly 12c64a4b79 Initial commit for the Creative ZEN X-Fi2 and X-Fi3 ports
These are really similar devices so one commit for both is ok.

Change-Id: I8bd1d3fef1eb6d00aaadfb7af56c771f62d0c9c3
2012-05-19 16:10:52 +02:00

61 lines
1.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2012 by Amaury Pouly
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "audiohw.h"
#include "audio.h"
#include "audioout-imx233.h"
#include "audioin-imx233.h"
#include "pinctrl-imx233.h"
static int input_source = AUDIO_SRC_PLAYBACK;
static unsigned input_flags = 0;
static int output_source = AUDIO_SRC_PLAYBACK;
static void select_audio_path(void)
{
/* route audio to HP */
imx233_set_pin_function(1, 30, PINCTRL_FUNCTION_GPIO);
imx233_enable_gpio_output(1, 30, true);
imx233_set_gpio_output(1, 30, true);
if(input_source == AUDIO_SRC_PLAYBACK)
imx233_audioout_select_hp_input(false);
else
imx233_audioout_select_hp_input(true);
}
void audio_input_mux(int source, unsigned flags)
{
(void) source;
(void) flags;
input_source = source;
input_flags = flags;
select_audio_path();
}
void audio_set_output_source(int source)
{
(void) source;
output_source = source;
select_audio_path();
}