Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware
History
Rob Purchase 3f7f5d7431 D2: Stop panic screen from crashing instantly (seems this has been broken for a while). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17670 a1c6a512-1295-4272-9138-f99709370657
2008-05-31 11:30:24 +00:00
..
common Check for a supported partition type before trying to mount a partition. This will reduce the risk of irregular mounts, e.g. due to stray FAT boot sectors when probing the logical sector size on iPod Video. 2008-05-15 22:23:14 +00:00
decompressor
drivers Targets with HAVE_LCD_ENABLE: Provide a means to receive notifications when the lcd is enabled and the image is refreshed so overlayed drawing can also be refreshed. Chiefly mpegplayer needs this so it can redraw the YUV data after the backlight is turned on while paused or when using 'Set Start Time'. 2008-05-28 10:17:16 +00:00
export Gigabeat F/X: 2008-05-29 21:27:44 +00:00
include Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 2008-05-05 10:32:46 +00:00
target D2: Stop panic screen from crashing instantly (seems this has been broken for a while). 2008-05-31 11:30:24 +00:00
test Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
usbstack Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a microsd card (no hotswap), use HAVE_ATA_SD for the Sansa flash driver so we don't rely on HAVE_HOTSWAP in some places. 2008-05-13 02:50:31 +00:00
arabjoin.c
arabjoin.h
ata_idle_notify.c It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller. 2008-03-17 05:22:53 +00:00
backlight.c Oops. Left a couple things in a bad state when using fading. 2008-05-14 21:29:43 +00:00
bidi.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
buffer.c
COPYING
debug.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
eeprom_settings.c
enc_base.c
events.c Increased MAX_SYS_EVENTS from 10 to 16, since there are potentially more than 10 events that can registered. Should fix FS#9039 - *PANIC* event line full (reproduceable). 2008-05-26 06:54:57 +00:00
font.c Killed unnecessary global variables by making them static. 2008-04-20 10:24:15 +00:00
font_cache.c Make a couple of private functions static 2008-04-12 17:08:35 +00:00
general.c mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon. 2007-12-29 19:46:35 +00:00
hangul.c
hotswap.c Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later. 2008-03-12 11:08:41 +00:00
id3.c FS #8680. MOD codec by Rainer Sinsch. 2008-05-21 11:19:58 +00:00
ifp_usb_serial.c move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use 2008-03-02 18:16:24 +00:00
kernel.c 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2008-05-14 18:55:19 +00:00
logf.c implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu. 2008-03-02 20:45:33 +00:00
lru.c
Makefile
mp3_playback.c Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 2008-03-26 01:50:41 +00:00
mp3data.c Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking. 2008-05-05 10:32:46 +00:00
mpeg.c Fix red (missing header file) 2008-04-27 20:09:45 +00:00
panic.c D2: Stop panic screen from crashing instantly (seems this has been broken for a while). 2008-05-31 11:30:24 +00:00
pcm.c Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit). 2008-04-06 04:34:57 +00:00
pcm_record.c Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit). 2008-04-06 04:34:57 +00:00
pcm_sampr.c
powermgmt.c Get a good start on cleaning up powermgmt.c 2008-05-19 03:59:52 +00:00
profile.c Moved private types and constants from profile.h to profile.c 2008-04-28 18:41:13 +00:00
README
replaygain.c Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static. 2008-05-03 08:35:14 +00:00
rolo.c Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the currently running image was being overwritten in place. Minor tweak to rolo.c based on imx31 errata sheet about not masking FIQ without masking IRQ which is fine to use on all ARM anyway. 2008-05-08 12:09:14 +00:00
rom.lds Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 2008-04-29 06:19:32 +00:00
scroll_engine.c Killed unnecessary global variables by making them static. 2008-04-20 10:24:15 +00:00
sound.c Make life easier for people working on new ports (audio drivers are normally one of the last things written), and revert r17511. Also take the opportunity to use more typical dummy values for VOLUME_MIN and VOLUME_MAX. 2008-05-24 08:03:15 +00:00
SOURCES Gigabeat S: 2008-05-21 08:42:11 +00:00
system.c Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 2008-04-29 06:19:32 +00:00
thread.c Actually remove the ata lock hack code for that had been used for iPod Video 60/80. It has been disabled for awhile anyway and the problem that nescessitated it really appears resolved. 2008-05-17 16:19:58 +00:00
timer.c Commit whole Creative Zen Vision:M target tree + all related firmware/ 2008-04-24 20:08:28 +00:00
tuner.c
usb.c 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2008-05-14 18:55:19 +00:00

README 

See docs/README