| .. |
|
archos/av300
|
Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.
|
2011-01-02 22:51:47 +00:00 |
|
as3525
|
Convert AMS target USB detection to event-based (no more polling in a tick). Seems well on my Clip v1 and Fuze v2.
|
2011-01-29 00:44:59 +00:00 |
|
at91sam
|
|
|
|
imx31
|
i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.
|
2011-01-23 20:21:35 +00:00 |
|
ipod
|
Simplify x0/x1 calculation for iPod Color some more, and fix display on type 0 LCD (iPod Photo).
|
2011-01-23 16:24:52 +00:00 |
|
iriver
|
Convert PortalPlayer iRivers to use USB-mode enabled bootloader. The H10 5/6GB already has a pre-boot USB mode (so it's a little redundant there) but building them the same way is simpler.
|
2011-01-17 06:50:27 +00:00 |
|
olympus
|
*/app.lds: remove STUBOFFSET
|
2010-09-20 17:09:55 +00:00 |
|
pbell
|
Get the last warning for vibe 500 bootloader.
|
2011-01-15 09:11:38 +00:00 |
|
philips
|
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
|
2011-01-16 01:40:15 +00:00 |
|
pnx0101
|
move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.
|
2010-11-06 14:24:25 +00:00 |
|
s3c2440
|
Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.
|
2011-01-02 22:51:47 +00:00 |
|
s5l8700
|
Remove files accidentally commited in 28953
|
2011-01-03 13:24:27 +00:00 |
|
s5l8702
|
Fix iPod Classic LCD problems
|
2011-01-08 21:01:06 +00:00 |
|
samsung
|
*/app.lds: remove STUBOFFSET
|
2010-09-20 17:09:55 +00:00 |
|
sandisk
|
Fix r29062 warning.
|
2011-01-16 01:48:15 +00:00 |
|
tatung
|
*/app.lds: remove STUBOFFSET
|
2010-09-20 17:09:55 +00:00 |
|
tcc77x
|
move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.
|
2010-11-06 14:24:25 +00:00 |
|
tcc780x
|
Try to get some control over #ifdef hell in usb.c by refactoring and inline function use. SYS_USB_DISCONNECTED_ACK hasn't been doing anything useful for the USB thread; remove it. USB thread simply ignores that value. Observe only valid usb_state transitions.
|
2011-01-18 14:10:06 +00:00 |
|
tms320dm320
|
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
|
2011-01-15 08:52:59 +00:00 |
|
adc-as3514.c
|
|
|
|
adc-pp5020.c
|
|
|
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
|
|
|
ata-as-arm.S
|
|
|
|
ata-nand-telechips.c
|
|
|
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
Fix or at least significantly improve FS#11830. With introduction of ATA DMA for PP502x a special treatment of the IDE0_CFG register for the iPod nano (see FS#7510) was lost.
|
2011-01-21 23:32:57 +00:00 |
|
ata-sd-pp.c
|
Try to get some control over #ifdef hell in usb.c by refactoring and inline function use. SYS_USB_DISCONNECTED_ACK hasn't been doing anything useful for the USB thread; remove it. USB thread simply ignores that value. Observe only valid usb_state transitions.
|
2011-01-18 14:10:06 +00:00 |
|
ata-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
audio-pp.c
|
|
|
|
bits-armv4.S
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
bits-armv6.S
|
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
|
2010-06-30 02:02:46 +00:00 |
|
boot-pp502x-bl-usb.lds
|
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
|
2011-01-16 01:40:15 +00:00 |
|
crt0-pp-bl.S
|
HDD6330: fix loading of the OF through the Rockbox bootloader (correct magic values in registers at the start), fix bootloader warnings.
|
2010-10-21 21:16:00 +00:00 |
|
crt0-pp.S
|
ipodvideo: detect ram size at boot (doesn't actually get USED yet)
|
2010-08-29 13:20:16 +00:00 |
|
crt0-pp502x-bl-usb.S
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
crt0.S
|
|
|
|
debug-pp.c
|
move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.
|
2010-11-06 14:24:25 +00:00 |
|
debug-target.h
|
move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.
|
2010-11-06 14:24:25 +00:00 |
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
|
|
|
i2c-telechips.c
|
|
|
|
i2s-pp.c
|
|
|
|
kernel-pp.c
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
lcd-as-memframe.S
|
|
|
|
lcd-c200_c200v2.c
|
udelay between command and data write seems to get rid of the display glitches on C200v2
|
2010-06-27 03:24:56 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
mmu-arm.S
|
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
|
2011-01-02 23:16:27 +00:00 |
|
mmu-armv6.S
|
Fix beast, forgot the asm label when renaming.
|
2010-09-09 17:00:50 +00:00 |
|
pcm-pp.c
|
|
|
|
pcm-telechips.c
|
Various minor cleanups for cowon d2
|
2010-08-01 09:33:29 +00:00 |
|
powermgmt-ascodec.c
|
|
|
|
sd-pp-target.h
|
|
|
|
support-arm.S
|
|
|
|
system-arm.c
|
Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android.
|
2010-08-12 13:38:25 +00:00 |
|
system-arm.h
|
|
|
|
system-pp502x.c
|
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
|
2011-01-17 12:24:41 +00:00 |
|
system-pp5002.c
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
system-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
thread-arm.c
|
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
|
2011-01-02 23:16:27 +00:00 |
|
thread-pp.c
|
|
|
|
timer-pp.c
|
|
|
|
usb-drv-arc.c
|
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
|
2011-01-17 12:24:41 +00:00 |
|
usb-fw-pp502x.c
|
PP502x USB: It seems r29087 introduced additional parasitic current consumption after USB disconnect. So, reinitialize the controller just like at startup when disabling USB, which also happens to fix FS#10719.
|
2011-01-20 06:41:05 +00:00 |
|
usb-fw-pp5002.c
|
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
|
2011-01-15 08:52:59 +00:00 |
|
usb-s3c6400x.c
|
Fix yellow, already assign values for various S5L8702 defines
|
2010-12-12 00:59:59 +00:00 |
|
usb-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
usb-tcc.c
|
Various minor cleanups for cowon d2
|
2010-08-01 09:33:29 +00:00 |
|
wmcodec-pp.c
|
|
|
|
wmcodec-telechips.c
|
|
|
3f709eada2