Michael Sevakis 05f6f3419a Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29068 a1c6a512-1295-4272-9138-f99709370657		2011-01-17 12:24:41 +00:00
..
usb_charging_only.c	Comment out LOGF_ENABLE defines everywhere, replace evil comments	2009-11-03 16:25:03 +00:00
usb_charging_only.h	USB retweaking: Take out the USB_REQUEST/RELEASE_DISK scheme and simply ask the USB core whether or not any drivers require exclusive access at the moment of connect. Doing anthing else just produces nasty effects on Windows because it expects some communication just for enabling the PHY and not allowing it to mount volumes if a thread doesn't ack causes annoying error message boxes. Make behavior of each USB type identical from the system perspective. Some miscellaneous changes (simplify, ata->storage naming, define only used USB_* enums values were possible).	2009-01-13 16:27:35 +00:00
usb_class_driver.h	Fix even more tabs	2010-01-03 10:35:31 +00:00
usb_core.c	Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.	2011-01-17 12:24:41 +00:00
usb_hid.c	Commit a HID fix by gevaerts that prevent the HID driver to call usb_drv_send_nonblocking while the previous transfer has not finished because the current stack doesn't support transfer queueing.	2010-03-25 13:50:26 +00:00
usb_hid.h	Flyspray: FS#10326	2009-07-18 12:58:29 +00:00
usb_hid_usage_tables.h	Commit "FS#10468 - USB HID: Show keypad mode on screen"	2009-09-30 10:06:04 +00:00
usb_serial.c	Fix a bug in usbserial that would allow to send messages on EP_CONTROL between usb init and endpoints allocation via logf.	2010-01-11 21:03:48 +00:00
usb_serial.h	Add const to usb_serial_send() buffer.	2009-08-19 05:30:40 +00:00
usb_storage.c	Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).	2011-01-15 08:19:30 +00:00
usb_storage.h	Allow class drivers to reuse the core data buffer for control transfers. This doesn't make much difference right now, but it should keep HID memory usage lower (once HID is ready) (FS#10146 by Tomer Shalev)	2009-04-18 20:40:50 +00:00