800023bc4e
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8755 a1c6a512-1295-4272-9138-f99709370657
278 lines
6.6 KiB
C
278 lines
6.6 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Driver for WM8758 audio codec
|
|
*
|
|
* Based on code from the ipodlinux project - http://ipodlinux.org/
|
|
* Adapted for Rockbox in December 2005
|
|
*
|
|
* Original file: linux/arch/armnommu/mach-ipod/audio.c
|
|
*
|
|
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "lcd.h"
|
|
#include "cpu.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "power.h"
|
|
#include "debug.h"
|
|
#include "system.h"
|
|
#include "sprintf.h"
|
|
#include "button.h"
|
|
#include "string.h"
|
|
#include "file.h"
|
|
#include "buffer.h"
|
|
#include "audio.h"
|
|
|
|
#include "i2c-pp5020.h"
|
|
#include "wm8758.h"
|
|
#include "pcf50605.h"
|
|
|
|
void wmcodec_reset(void);
|
|
|
|
#define IPOD_PCM_LEVEL 0x65 /* -6dB */
|
|
|
|
//#define BASSCTRL 0x
|
|
//#define TREBCTRL 0x0b
|
|
|
|
/*
|
|
* Reset the I2S BIT.FORMAT I2S, 16bit, FIFO.FORMAT 32bit
|
|
*/
|
|
static void i2s_reset(void)
|
|
{
|
|
/* PP502x */
|
|
|
|
/* I2S soft reset */
|
|
outl(inl(0x70002800) | 0x80000000, 0x70002800);
|
|
outl(inl(0x70002800) & ~0x80000000, 0x70002800);
|
|
|
|
/* BIT.FORMAT [11:10] = I2S (default) */
|
|
outl(inl(0x70002800) & ~0xc00, 0x70002800);
|
|
/* BIT.SIZE [9:8] = 16bit (default) */
|
|
outl(inl(0x70002800) & ~0x300, 0x70002800);
|
|
|
|
/* FIFO.FORMAT [6:4] = 32 bit LSB */
|
|
/* since BIT.SIZ < FIFO.FORMAT low 16 bits will be 0 */
|
|
outl(inl(0x70002800) | 0x30, 0x70002800);
|
|
|
|
/* RX_ATN_LVL=1 == when 12 slots full */
|
|
/* TX_ATN_LVL=1 == when 12 slots empty */
|
|
outl(inl(0x7000280c) | 0x33, 0x7000280c);
|
|
|
|
/* Rx.CLR = 1, TX.CLR = 1 */
|
|
outl(inl(0x7000280c) | 0x1100, 0x7000280c);
|
|
}
|
|
|
|
void wm8758_write(int reg, int data)
|
|
{
|
|
ipod_i2c_send(0x1a, (reg<<1) | ((data&0x100)>>8),data&0xff);
|
|
}
|
|
|
|
/*
|
|
* Initialise the WM8758 for playback via headphone and line out.
|
|
* Note, I'm using the WM8750 datasheet as its apparently close.
|
|
*/
|
|
int wmcodec_init(void) {
|
|
/* reset I2C */
|
|
i2c_init();
|
|
|
|
/* normal outputs for CDI and I2S pin groups */
|
|
outl(inl(0x70000020) & ~0x300, 0x70000020);
|
|
|
|
/*mini2?*/
|
|
outl(inl(0x70000010) & ~0x3000000, 0x70000010);
|
|
/*mini2?*/
|
|
|
|
/* device reset */
|
|
outl(inl(0x60006004) | 0x800, 0x60006004);
|
|
outl(inl(0x60006004) & ~0x800, 0x60006004);
|
|
|
|
/* device enable */
|
|
outl(inl(0x6000600C) | 0x807, 0x6000600C);
|
|
|
|
/* enable external dev clock clocks */
|
|
outl(inl(0x6000600c) | 0x2, 0x6000600c);
|
|
|
|
/* external dev clock to 24MHz */
|
|
outl(inl(0x70000018) & ~0xc, 0x70000018);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Silently enable / disable audio output */
|
|
void wmcodec_enable_output(bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
/* reset the I2S controller into known state */
|
|
i2s_reset();
|
|
|
|
/* TODO: Review the power-up sequence to prevent pops */
|
|
|
|
wm8758_write(RESET, 0x1ff); /*Reset*/
|
|
|
|
wm8758_write(PWRMGMT1, 0x2b);
|
|
wm8758_write(PWRMGMT2, 0x180);
|
|
wm8758_write(PWRMGMT3, 0x6f);
|
|
|
|
wm8758_write(AINTFCE, 0x10);
|
|
wm8758_write(CLKCTRL, 0x49);
|
|
|
|
wm8758_write(OUTCTRL, 1);
|
|
|
|
/* The iPod can handle multiple frequencies, but fix at 44.1KHz
|
|
for now */
|
|
wmcodec_set_sample_rate(WM8758_44100HZ);
|
|
|
|
wm8758_write(LOUTMIX,0x1); /* Enable mixer */
|
|
wm8758_write(ROUTMIX,0x1); /* Enable mixer */
|
|
wmcodec_mute(0);
|
|
} else {
|
|
wmcodec_mute(1);
|
|
}
|
|
}
|
|
|
|
int wmcodec_set_master_vol(int vol_l, int vol_r)
|
|
{
|
|
/* +6 to -73dB 1dB steps (plus mute == 80levels) 7bits */
|
|
/* 1111111 == +6dB */
|
|
/* 1111001 == 0dB */
|
|
/* 0110000 == -73dB */
|
|
/* 0101111 == mute (0x2f) */
|
|
|
|
/* OUT1 */
|
|
wm8758_write(LOUT1VOL, vol_l);
|
|
wm8758_write(ROUT1VOL, 0x100 | vol_r);
|
|
|
|
/* OUT2 */
|
|
wm8758_write(LOUT2VOL, vol_l);
|
|
wm8758_write(ROUT2VOL, 0x100 | vol_r);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wmcodec_set_mixer_vol(int channel1, int channel2)
|
|
{
|
|
(void)channel1;
|
|
(void)channel2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* We are using Linear bass control */
|
|
void wmcodec_set_bass(int value)
|
|
{
|
|
(void)value;
|
|
#if 0
|
|
/* Not yet implemented - this is the wm8975 code*/
|
|
int regvalues[]={11, 10, 10, 9, 8, 8, 0xf , 6, 6, 5, 4, 4, 3, 2, 1, 0};
|
|
|
|
if ((value >= -6) && (value <= 9)) {
|
|
/* We use linear bass control with 130Hz cutoff */
|
|
wm8758_write(BASSCTRL, regvalues[value+6]);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void wmcodec_set_treble(int value)
|
|
{
|
|
(void)value;
|
|
#if 0
|
|
/* Not yet implemented - this is the wm8975 code*/
|
|
int regvalues[]={11, 10, 10, 9, 8, 8, 0xf , 6, 6, 5, 4, 4, 3, 2, 1, 0};
|
|
|
|
if ((value >= -6) && (value <= 9)) {
|
|
/* We use a 8Khz cutoff */
|
|
wm8758_write(TREBCTRL, regvalues[value+6]);
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
int wmcodec_mute(int mute)
|
|
{
|
|
if (mute)
|
|
{
|
|
/* Set DACMU = 1 to soft-mute the audio DACs. */
|
|
wm8758_write(DACCTRL, 0x40);
|
|
} else {
|
|
/* Set DACMU = 0 to soft-un-mute the audio DACs. */
|
|
wm8758_write(DACCTRL, 0x0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Nice shutdown of WM8758 codec */
|
|
void wmcodec_close(void)
|
|
{
|
|
wmcodec_mute(1);
|
|
|
|
wm8758_write(PWRMGMT3, 0x0);
|
|
|
|
wm8758_write(PWRMGMT1, 0x0);
|
|
|
|
wm8758_write(PWRMGMT2, 0x40);
|
|
}
|
|
|
|
/* Change the order of the noise shaper, 5th order is recommended above 32kHz */
|
|
void wmcodec_set_nsorder(int order)
|
|
{
|
|
(void)order;
|
|
}
|
|
|
|
/* Note: Disable output before calling this function */
|
|
void wmcodec_set_sample_rate(int sampling_control)
|
|
{
|
|
/**** We force 44.1KHz for now. ****/
|
|
(void)sampling_control;
|
|
|
|
/* set clock div */
|
|
wm8758_write(CLKCTRL, 1 | (0 << 2) | (2 << 5));
|
|
|
|
/* setup PLL for MHZ=11.2896 */
|
|
wm8758_write(PLLN, (1 << 4) | 0x7);
|
|
wm8758_write(PLLK1, 0x21);
|
|
wm8758_write(PLLK2, 0x161);
|
|
wm8758_write(PLLK3, 0x26);
|
|
|
|
/* set clock div */
|
|
wm8758_write(CLKCTRL, 1 | (1 << 2) | (2 << 5) | (1 << 8));
|
|
|
|
/* set srate */
|
|
wm8758_write(SRATECTRL, (0 << 1));
|
|
}
|
|
|
|
void wmcodec_enable_recording(bool source_mic)
|
|
{
|
|
(void)source_mic;
|
|
}
|
|
|
|
void wmcodec_disable_recording(void) {
|
|
|
|
}
|
|
|
|
void wmcodec_set_recvol(int left, int right, int type) {
|
|
|
|
(void)left;
|
|
(void)right;
|
|
(void)type;
|
|
}
|
|
|
|
void wmcodec_set_monitor(int enable) {
|
|
|
|
(void)enable;
|
|
}
|