5656f8245f
Use unmodified C200 keymap when possible, variation of it when not Use Archos bitmaps when possible Current problems: - Pegbox plugin shows display corruption (corruption is different in the simulator) - Bubbles plugin misses 1 or 2 bottom lines, but if we gain back these lines it occupies a too small area of the screen - Splitted screen (yellow/blue) is a bit weird in most plugins git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19252 a1c6a512-1295-4272-9138-f99709370657
195 lines
5.2 KiB
C
195 lines
5.2 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa Clip
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 40
|
|
#define MODEL_NAME "Sandisk Sansa Clip"
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
#if 0 /* disabled since there is no driver (yet) */
|
|
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
|
|
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
|
|
#define REC_SAMPR_DEFAULT SAMPR_22
|
|
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
#endif
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
//#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
//#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
//#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
#define LCD_DEPTH 1
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be put to sleep.
|
|
* HAVE_LCD_ENABLE should be defined as well. */
|
|
//#define HAVE_LCD_SLEEP
|
|
//#define HAVE_LCD_SLEEP_SETTING
|
|
#endif
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the pixels */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 50
|
|
#define DEFAULT_CONTRAST_SETTING 30
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD SANSA_CLIP_PAD
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* We're working on the assumption that the AS3525 has something
|
|
similar to the AS3514 for audio codec etc */
|
|
#define HAVE_AS3514
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
#define CONFIG_RTC RTC_AS3514
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000 /* TODO : check if we can use IRAM */
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* FM Tuner */
|
|
#if 0 /* disabled since there is no driver (yet) */
|
|
#define CONFIG_TUNER SI4700 /* in fact SI4702 but let's hope it's compatible */
|
|
//#define HAVE_TUNER_PWR_CTRL
|
|
#endif
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging? FIXME */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/** Non-simulator section **/
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a AMS AS3525 SoC */
|
|
#define CONFIG_CPU AS3525
|
|
|
|
/* Define this if you want to use the AS3525 i2c interface */
|
|
#define CONFIG_I2C I2C_AS3525
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* Sansa can't be powered off while charging */
|
|
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 250000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_SSD1303
|
|
|
|
#ifndef BOOTLOADER
|
|
|
|
#if 0 /* disabled since there is no USB driver */
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0781
|
|
#define USB_PRODUCT_ID 0x7433
|
|
#endif /* BOOTLOADER */
|
|
|
|
#endif
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "sansa"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#define INCLUDE_TIMEOUT_API
|
|
|
|
#endif /* SIMULATOR */
|
|
|
|
/** Port-specific settings **/
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* Default recording levels */
|
|
#define DEFAULT_REC_MIC_GAIN 23
|
|
#define DEFAULT_REC_LEFT_GAIN 23
|
|
#define DEFAULT_REC_RIGHT_GAIN 23
|