Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/lcd-h300.c

484 lines
15 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2004 by Linus Nielsen Feltzing
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include <string.h>
#include <stdlib.h>
#include "file.h"
#include "debug.h"
#include "system.h"
#include "font.h"
#include "bidi.h"
static bool display_on = false; /* is the display turned on? */
static bool display_flipped = false;
static int xoffset = 0; /* needed for flip */
/* register defines */
#define R_START_OSC 0x00
#define R_DRV_OUTPUT_CONTROL 0x01
#define R_DRV_WAVEFORM_CONTROL 0x02
#define R_ENTRY_MODE 0x03
#define R_COMPARE_REG1 0x04
#define R_COMPARE_REG2 0x05
#define R_DISP_CONTROL1 0x07
#define R_DISP_CONTROL2 0x08
#define R_DISP_CONTROL3 0x09
#define R_FRAME_CYCLE_CONTROL 0x0b
#define R_EXT_DISP_IF_CONTROL 0x0c
#define R_POWER_CONTROL1 0x10
#define R_POWER_CONTROL2 0x11
#define R_POWER_CONTROL3 0x12
#define R_POWER_CONTROL4 0x13
#define R_RAM_ADDR_SET 0x21
#define R_WRITE_DATA_2_GRAM 0x22
#define R_GAMMA_FINE_ADJ_POS1 0x30
#define R_GAMMA_FINE_ADJ_POS2 0x31
#define R_GAMMA_FINE_ADJ_POS3 0x32
#define R_GAMMA_GRAD_ADJ_POS 0x33
#define R_GAMMA_FINE_ADJ_NEG1 0x34
#define R_GAMMA_FINE_ADJ_NEG2 0x35
#define R_GAMMA_FINE_ADJ_NEG3 0x36
#define R_GAMMA_GRAD_ADJ_NEG 0x37
#define R_GAMMA_AMP_ADJ_RES_POS 0x38
#define R_GAMMA_AMP_AVG_ADJ_RES_NEG 0x39
#define R_GATE_SCAN_POS 0x40
#define R_VERT_SCROLL_CONTROL 0x41
#define R_1ST_SCR_DRV_POS 0x42
#define R_2ND_SCR_DRV_POS 0x43
#define R_HORIZ_RAM_ADDR_POS 0x44
#define R_VERT_RAM_ADDR_POS 0x45
#define LCD_CMD (*(volatile unsigned short *)0xf0000000)
#define LCD_DATA (*(volatile unsigned short *)0xf0000002)
/* called very frequently - inline! */
static inline void lcd_write_reg(int reg, int val)
{
LCD_CMD = reg;
LCD_DATA = val;
}
/* called very frequently - inline! */
static inline void lcd_begin_write_gram(void)
{
LCD_CMD = R_WRITE_DATA_2_GRAM;
}
/*** hardware configuration ***/
void lcd_set_contrast(int val)
{
(void)val;
}
void lcd_set_invert_display(bool yesno)
{
(void)yesno;
}
static void flip_lcd(bool yesno)
{
if (yesno)
{
lcd_write_reg(R_DRV_OUTPUT_CONTROL, 0x031b); /* 224 lines, GS=SS=1 */
lcd_write_reg(R_GATE_SCAN_POS, 0x0002); /* 16 lines offset */
lcd_write_reg(R_1ST_SCR_DRV_POS, 0xdf04); /* 4..223 */
}
else
{
lcd_write_reg(R_DRV_OUTPUT_CONTROL, 0x001b); /* 224 lines, GS=SS=0 */
lcd_write_reg(R_GATE_SCAN_POS, 0x0000);
lcd_write_reg(R_1ST_SCR_DRV_POS, 0xdb00); /* 0..219 */
}
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
display_flipped = yesno;
xoffset = yesno ? 4 : 0;
if (display_on)
flip_lcd(yesno);
}
static void _display_on(void)
{
/** Sequence according to datasheet, p. 132 **/
lcd_write_reg(R_START_OSC, 0x0001); /* Start Oscilation */
sleep(1);
/* zero everything*/
lcd_write_reg(R_POWER_CONTROL1, 0x0000); /* STB = 0, SLP = 0 */
lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* GON = 0, DTE = 0, D1-0 = 00b */
lcd_write_reg(R_POWER_CONTROL3, 0x0000); /* PON = 0 */
lcd_write_reg(R_POWER_CONTROL4, 0x0000); /* VCOMG = 0 */
sleep(1);
/* initialise power supply */
/* DC12-10 = 000b: Step-up1 = clock/8,
* DC02-00 = 000b: Step-up2 = clock/16,
* VC2-0 = 010b: VciOUT = 0.87 * VciLVL */
lcd_write_reg(R_POWER_CONTROL2, 0x0002);
/* VRH3-0 = 1000b: Vreg1OUT = REGP * 1.90 */
lcd_write_reg(R_POWER_CONTROL3, 0x0008);
/* VDV4-0 = 00110b: VcomA = Vreg1OUT * 0.76,
* VCM4-0 = 10000b: VcomH = Vreg1OUT * 0.70*/
lcd_write_reg(R_POWER_CONTROL4, 0x0610);
lcd_write_reg(R_POWER_CONTROL1, 0x0044); /* AP2-0 = 100b, DK = 1 */
lcd_write_reg(R_POWER_CONTROL3, 0x0018); /* PON = 1 */
sleep(4); /* Step-up circuit stabilising time */
/* start power supply */
lcd_write_reg(R_POWER_CONTROL1, 0x0540); /* BT2-0 = 101b, DK = 0 */
lcd_write_reg(R_POWER_CONTROL4, 0x2610); /* VCOMG = 1 */
/* other settings */
/* B/C = 1: n-line inversion form
* EOR = 1: polarity inversion occurs by applying an EOR to odd/even
* frame select signal and an n-line inversion signal.
* FLD = 01b: 1 field interlaced scan, external display iface */
lcd_write_reg(R_DRV_WAVEFORM_CONTROL, 0x0700);
/* Address counter updated in vertical direction; left to right;
* vertical increment horizontal increment.
* data format for 8bit transfer or spi = 65k (5,6,5)
* Reverse order of RGB to BGR for 18bit data written to GRAM
* Replace data on writing to GRAM */
lcd_write_reg(R_ENTRY_MODE, 0x7038);
flip_lcd(display_flipped);
lcd_write_reg(R_2ND_SCR_DRV_POS, 0x0000);
lcd_write_reg(R_VERT_SCROLL_CONTROL, 0x0000);
/* 19 clocks,no equalization */
lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x0002);
/* Transfer mode for RGB interface disabled
* internal clock operation;
* System interface/VSYNC interface */
lcd_write_reg(R_EXT_DISP_IF_CONTROL, 0x0003);
/* Front porch lines: 8; Back porch lines: 8; */
lcd_write_reg(R_DISP_CONTROL2, 0x0808);
/* Scan mode by the gate driver in the non-display area: disabled;
* Cycle of scan by the gate driver - set to 31frames(518ms),
* disabled by above setting */
lcd_write_reg(R_DISP_CONTROL3, 0x003f);
lcd_write_reg(R_GAMMA_FINE_ADJ_POS1, 0x0003);
lcd_write_reg(R_GAMMA_FINE_ADJ_POS2, 0x0707);
lcd_write_reg(R_GAMMA_FINE_ADJ_POS3, 0x0007);
lcd_write_reg(R_GAMMA_GRAD_ADJ_POS, 0x0705);
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG1, 0x0007);
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG2, 0x0000);
lcd_write_reg(R_GAMMA_FINE_ADJ_NEG3, 0x0407);
lcd_write_reg(R_GAMMA_GRAD_ADJ_NEG, 0x0507);
lcd_write_reg(R_GAMMA_AMP_ADJ_RES_POS, 0x1d09);
lcd_write_reg(R_GAMMA_AMP_AVG_ADJ_RES_NEG, 0x0303);
display_on=true; /* must be done before calling lcd_update() */
lcd_update();
sleep(4); /* op-amp stabilising time */
/** Sequence according to datasheet, p. 130 **/
lcd_write_reg(R_POWER_CONTROL1, 0x4540); /* SAP2-0=100, BT2-0=101, AP2-0=100 */
lcd_write_reg(R_DISP_CONTROL1, 0x0005); /* GON=0, DTE=0, REV=1, D1-0=01 */
sleep(2);
lcd_write_reg(R_DISP_CONTROL1, 0x0025); /* GON=1, DTE=0, REV=1, D1-0=01 */
lcd_write_reg(R_DISP_CONTROL1, 0x0027); /* GON=1, DTE=0, REV=1, D1-0=11 */
sleep(2);
lcd_write_reg(R_DISP_CONTROL1, 0x0037); /* GON=1, DTE=1, REV=1, D1-0=11 */
}
/* LCD init */
void lcd_init_device(void)
{
/* GPO46 is LCD RESET */
or_l(0x00004000, &GPIO1_OUT);
or_l(0x00004000, &GPIO1_ENABLE);
or_l(0x00004000, &GPIO1_FUNCTION);
/* Reset LCD */
and_l(~0x00004000, &GPIO1_OUT);
sleep(1);
or_l(0x00004000, &GPIO1_OUT);
sleep(1);
_display_on();
}
void lcd_enable(bool on)
{
if(display_on!=on)
{
if(on)
{
_display_on();
}
else
{
/** Off sequence according to datasheet, p. 130 **/
lcd_write_reg(R_FRAME_CYCLE_CONTROL, 0x0002); /* EQ=0, 18 clks/line */
lcd_write_reg(R_DISP_CONTROL1, 0x0036); /* GON=1, DTE=1, REV=1, D1-0=10 */
sleep(2);
lcd_write_reg(R_DISP_CONTROL1, 0x0026); /* GON=1, DTE=0, REV=1, D1-0=10 */
sleep(2);
lcd_write_reg(R_DISP_CONTROL1, 0x0000); /* GON=0, DTE=0, D1-0=00 */
lcd_write_reg(R_POWER_CONTROL1, 0x0000); /* SAP2-0=000, AP2-0=000 */
lcd_write_reg(R_POWER_CONTROL3, 0x0000); /* PON=0 */
lcd_write_reg(R_POWER_CONTROL4, 0x0000); /* VCOMG=0 */
/* datasheet p. 131 */
lcd_write_reg(R_POWER_CONTROL1, 0x0001); /* STB=1: standby mode */
display_on=false;
}
}
}
/*** update functions ***/
/* Performance function that works with an external buffer
note that by and bheight are in 8-pixel units! */
void lcd_blit(const fb_data* data, int x, int by, int width,
int bheight, int stride)
{
/* TODO: Implement lcd_blit() */
(void)data;
(void)x;
(void)by;
(void)width;
(void)bheight;
(void)stride;
/*if(display_on)*/
}
#define CSUB_X 2
#define CSUB_Y 2
#define RYFAC (31*257)
#define GYFAC (63*257)
#define BYFAC (31*257)
#define RVFAC 11170 /* 31 * 257 * 1.402 */
#define GVFAC (-11563) /* 63 * 257 * -0.714136 */
#define GUFAC (-5572) /* 63 * 257 * -0.344136 */
#define BUFAC 14118 /* 31 * 257 * 1.772 */
#define ROUNDOFFS (127*257)
/* Performance function to blit a YUV bitmap directly to the LCD */
void lcd_yuv_blit(unsigned char * const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
if (display_on)
{
int ymax;
width = (width + 1) & ~1;
height = (height + 1) & ~1;
ymax = y + height - 1;
/* set update window */
/* horiz ram addr */
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (ymax << 8) | y);
/* vert ram addr */
lcd_write_reg(R_VERT_RAM_ADDR_POS,((x+xoffset+width-1) << 8) | (x+xoffset));
lcd_write_reg(R_RAM_ADDR_SET, ((x+xoffset) << 8) | y);
lcd_begin_write_gram();
for (; y <= ymax; y++)
{
/* upsampling, YUV->RGB conversion and reduction to RGB565 in one go */
const unsigned char *ysrc = src[0] + stride * src_y + src_x;
const unsigned char *usrc = src[1] + (stride/CSUB_X) * (src_y/CSUB_Y)
+ (src_x/CSUB_X);
const unsigned char *vsrc = src[2] + (stride/CSUB_X) * (src_y/CSUB_Y)
+ (src_x/CSUB_X);
const unsigned char *row_end = ysrc + width;
int y, u, v;
int rc, gc, bc;
int red, green, blue;
unsigned rbits, gbits, bbits;
do
{
u = *usrc++ - 128;
v = *vsrc++ - 128;
rc = RVFAC * v + ROUNDOFFS;
gc = GVFAC * v + GUFAC * u + ROUNDOFFS;
bc = BUFAC * u + ROUNDOFFS;
y = *ysrc++;
red = RYFAC * y + rc;
green = GYFAC * y + gc;
blue = BYFAC * y + bc;
if ((unsigned)red > (RYFAC*255+ROUNDOFFS))
{
if (red < 0)
red = 0;
else
red = (RYFAC*255+ROUNDOFFS);
}
if ((unsigned)green > (GYFAC*255+ROUNDOFFS))
{
if (green < 0)
green = 0;
else
green = (GYFAC*255+ROUNDOFFS);
}
if ((unsigned)blue > (BYFAC*255+ROUNDOFFS))
{
if (blue < 0)
blue = 0;
else
blue = (BYFAC*255+ROUNDOFFS);
}
rbits = ((unsigned)red) >> 16 ;
gbits = ((unsigned)green) >> 16 ;
bbits = ((unsigned)blue) >> 16 ;
LCD_DATA = (rbits << 11) | (gbits << 5) | bbits;
y = *ysrc++;
red = RYFAC * y + rc;
green = GYFAC * y + gc;
blue = BYFAC * y + bc;
if ((unsigned)red > (RYFAC*255+ROUNDOFFS))
{
if (red < 0)
red = 0;
else
red = (RYFAC*255+ROUNDOFFS);
}
if ((unsigned)green > (GYFAC*255+ROUNDOFFS))
{
if (green < 0)
green = 0;
else
green = (GYFAC*255+ROUNDOFFS);
}
if ((unsigned)blue > (BYFAC*255+ROUNDOFFS))
{
if (blue < 0)
blue = 0;
else
blue = (BYFAC*255+ROUNDOFFS);
}
rbits = ((unsigned)red) >> 16 ;
gbits = ((unsigned)green) >> 16 ;
bbits = ((unsigned)blue) >> 16 ;
LCD_DATA = (rbits << 11) | (gbits << 5) | bbits;
}
while (ysrc < row_end);
src_y++;
}
}
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void) ICODE_ATTR;
void lcd_update(void)
{
if(display_on){
/* reset update window */
/* horiz ram addr: 0 - 175 */
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, 0xaf00);
/* vert ram addr: 0 - 219 */
lcd_write_reg(R_VERT_RAM_ADDR_POS,((xoffset+219)<<8) | xoffset);
/* Copy display bitmap to hardware */
lcd_write_reg(R_RAM_ADDR_SET, xoffset << 8);
lcd_begin_write_gram();
lcd_write_data((unsigned short *)lcd_framebuffer, LCD_WIDTH*LCD_HEIGHT);
}
}
/* Update a fraction of the display. */
void lcd_update_rect(int, int, int, int) ICODE_ATTR;
void lcd_update_rect(int x, int y, int width, int height)
{
if(display_on) {
int ymax = y + height - 1;
if(x + width > LCD_WIDTH)
width = LCD_WIDTH - x;
if (width <= 0)
return; /* nothing left to do, 0 is harmful to lcd_write_data() */
if(ymax >= LCD_HEIGHT)
ymax = LCD_HEIGHT-1;
/* set update window */
/* horiz ram addr */
lcd_write_reg(R_HORIZ_RAM_ADDR_POS, (ymax << 8) | y);
/* vert ram addr */
lcd_write_reg(R_VERT_RAM_ADDR_POS,((x+xoffset+width-1) << 8) | (x+xoffset));
lcd_write_reg(R_RAM_ADDR_SET, ((x+xoffset) << 8) | y);
lcd_begin_write_gram();
/* Copy specified rectangle bitmap to hardware */
for (; y <= ymax; y++)
{
lcd_write_data ((unsigned short *)&lcd_framebuffer[y][x], width);
}
}
}
Reference in a new issue View git blame Copy permalink