Thomas Martitz 3d0cee8abb - Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hosted/sdl, uisdl.c is split up across button-sdl.c and system-sdl.c. ... - Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization). This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657		2010-05-15 21:02:47 +00:00
..
arm	YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.	2010-05-15 20:25:56 +00:00
coldfire	PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.	2010-05-12 14:05:36 +00:00
hosted/sdl	- Move uisimulator/sdl/*.[ch] into the target tree, under firmware/target/hosted/sdl, uisdl.c is split up across button-sdl.c and system-sdl.c.	2010-05-15 21:02:47 +00:00
mips	Hopefully finish off the red from r26051.	2010-05-15 14:16:35 +00:00
sh	Fix the remaining reds.	2010-05-06 22:33:57 +00:00