rockbox/firmware/target/coldfire/iriver/h100/spdif-h100.c

101 lines
3.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Michal Sevakis
* Based on the work of Thom Johansen
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include <stdbool.h>
#include "config.h"
#include "cpu.h"
#include "power.h"
#include "system.h"
#include "audio.h"
#include "spdif.h"
static int spdif_source = AUDIO_SRC_PLAYBACK;
static int spdif_on = false;
/* Initialize the S/PDIF driver */
void spdif_init(void)
{
/* PHASECONFIG setup: gain = 3*2^13, source = EBUIN */
PHASECONFIG = (6 << 3) | (4 << 0);
spdif_set_output_source(AUDIO_SRC_PLAYBACK, true);
}
/* Return the S/PDIF frequency in herz - unrounded */
unsigned long spdif_measure_frequency(void)
{
/* The following formula is specified in MCF5249 user's manual section
* 17.6.1. The 128 divide is because of the fact that the SPDIF clock is
* the sample rate times 128.
*/
return (unsigned long)((unsigned long long)FREQMEAS*CPU_FREQ /
((1 << 15)*3*(1 << 13))/128);
} /* spdif_measure_frequency */
/* Set the S/PDIF audio feed */
void spdif_set_output_source(int source, bool src_on)
{
static const unsigned short ebu1_config[] =
{
/* SCLK2, TXSRC = PDOR3, validity, normal operation */
[AUDIO_SRC_PLAYBACK+1] = (7 << 12) | (3 << 8) | (1 << 5) | (5 << 2),
/* Input source is EBUin1, Feed-through monitoring */
[AUDIO_SRC_SPDIF+1] = (1 << 2),
/* SCLK2, TXSRC = IIS1recv, validity, normal operation */
[AUDIO_SRC_MIC+1] = (7 << 12) | (4 << 8) | (1 << 5) | (5 << 2),
[AUDIO_SRC_LINEIN+1] = (7 << 12) | (4 << 8) | (1 << 5) | (5 << 2),
[AUDIO_SRC_FMRADIO+1] = (7 << 12) | (4 << 8) | (1 << 5) | (5 << 2),
};
int level;
unsigned long playing, recording;
if ((unsigned)source >= ARRAYLEN(ebu1_config))
source = AUDIO_SRC_PLAYBACK;
spdif_source = source;
spdif_on = spdif_powered() && src_on;
level = set_irq_level(HIGHEST_IRQ_LEVEL);
/* Check if DMA peripheral requests are enabled */
playing = DCR0 & DMA_EEXT;
recording = DCR1 & DMA_EEXT;
EBU1CONFIG = 0x800; /* Reset before reprogram */
/* Tranceiver must be powered or else monitoring will be disabled */
EBU1CONFIG = spdif_on ? ebu1_config[source + 1] : 0;
/* Kick-start DMAs if in progress */
if (recording)
DCR1 |= DMA_START;
if (playing)
DCR0 |= DMA_START;
set_irq_level(level);
} /* spdif_set_output_source */
/* Return the last set S/PDIF audio source */
int spdif_get_output_source(bool *src_on)
{
if (src_on != NULL)
*src_on = spdif_on;
return spdif_source;
} /* spdif_get_output_source */