bad4142ce2
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
212 lines
6.3 KiB
C
212 lines
6.3 KiB
C
#define TARGET_TREE /* this target is using the target tree system */
|
|
/*
|
|
* This config file is for iriver H320, H340
|
|
*/
|
|
#define IRIVER_H300_SERIES 1
|
|
|
|
#define MODEL_NAME "iriver H300 series"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 2
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 220
|
|
#define LCD_HEIGHT 176
|
|
#define LCD_DEPTH 16 /* 65k colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* remote LCD */
|
|
#define LCD_REMOTE_WIDTH 128
|
|
#define LCD_REMOTE_HEIGHT 64
|
|
#define LCD_REMOTE_DEPTH 1
|
|
|
|
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_REMOTE_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
|
|
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
|
|
|
|
#define CONFIG_KEYPAD IRIVER_H300_PAD
|
|
|
|
#define CONFIG_REMOTE_KEYPAD H300_REMOTE
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_PCF50606
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have an remote lcd */
|
|
#define HAVE_REMOTE_LCD
|
|
|
|
/* Define if we have a hardware defect that causes ticking on the audio line */
|
|
#define HAVE_REMOTE_LCD_TICKING
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
/* Which backlight fading type? */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768
|
|
|
|
#define HAVE_UDA1380
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define HAVE_RECORDING_HISTOGRAM
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
|
|
|
|
/* define hardware samples rate caps mask */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
#define HAVE_AGC
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 80 /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
|
|
#define CURRENT_BACKLIGHT 23 /* FIXME: This needs to be measured, copied from H100 */
|
|
#define CURRENT_RECORD 110 /* additional current while recording */
|
|
#define CURRENT_MAX_CHG 650 /* maximum charging current */
|
|
#define CURRENT_REMOTE 8 /* additional current when remote connected */
|
|
|
|
/* define this if the unit can have USB charging disabled by user -
|
|
* if USB/MAIN power is discernable and hardware doesn't compel charging */
|
|
#define HAVE_USB_CHARGING_ENABLE
|
|
|
|
/* Define this if you have a Motorola SCF5249 */
|
|
#define CONFIG_CPU MCF5249
|
|
|
|
/* Define this if you want to use coldfire's i2c interface */
|
|
#define CONFIG_I2C I2C_COLDFIRE
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x400000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 11289600
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
#define CONFIG_LCD LCD_H300
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ISP1362
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "iriver"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define BOOTLOADER_ENTRYPOINT 0x001F0000
|
|
#define FLASH_ENTRYPOINT 0x00001000
|
|
#define FLASH_MAGIC 0xfbfbfbf1
|
|
|
|
/* Define this if there is an EEPROM chip */
|
|
#define HAVE_EEPROM
|
|
|
|
/* Define this for FM radio input available */
|
|
#define HAVE_FMRADIO_IN
|
|
|
|
/** Port-specific settings **/
|
|
|
|
/* Main LCD contrast range and defaults */
|
|
#define MIN_CONTRAST_SETTING 5
|
|
#define MAX_CONTRAST_SETTING 63
|
|
#define DEFAULT_CONTRAST_SETTING 40
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
/* accepts 0..15 but note that 0 and 1 give a black display on H300! */
|
|
#define MIN_BRIGHTNESS_SETTING 2 /* 2/16 (12.50%) */
|
|
#define MAX_BRIGHTNESS_SETTING 15 /* 15/16 (93.75%) */
|
|
#define DEFAULT_BRIGHTNESS_SETTING 9 /* 9/16 (56.25%) */
|
|
|
|
/* Remote LCD contrast range and defaults */
|
|
#define MIN_REMOTE_CONTRAST_SETTING 5
|
|
#define MAX_REMOTE_CONTRAST_SETTING 63
|
|
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|