Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/iaudiox5.h
Torne Wuff bad4142ce2 Add LBA48 support to all targets with ATA, except archoses whose USB bridge chip can't handle it. 
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 12:10:17 +00:00

213 lines
6.2 KiB
C
Raw Blame History

/*
* This config file is for iAudio X5
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 10
#define MODEL_NAME "iAudio X5"
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
#define LCD_DEPTH 16 /* pseudo 262.144 colors */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* remote LCD */
#define LCD_REMOTE_WIDTH 128
#define LCD_REMOTE_HEIGHT 96
#define LCD_REMOTE_DEPTH 2
#define LCD_REMOTE_PIXELFORMAT VERTICAL_INTERLEAVED
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_REMOTE_DARKCOLOR 0x000000
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
#ifndef BOOTLOADER
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well. */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
#endif
#define CONFIG_KEYPAD IAUDIO_X5M5_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
#define AB_REPEAT_ENABLE 1
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50606
/* Define this if you have an remote lcd */
#define HAVE_REMOTE_LCD
#define CONFIG_LCD LCD_X5
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* FM Tuner */
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
#define HAVE_TLV320
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
#define BATTERY_CAPACITY_DEFAULT 950 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 950 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2250 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* Hardware controlled charging? FIXME */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define current usage levels */
#define CURRENT_NORMAL 65 /*2250mah/35h = 65 ma*/
#define CURRENT_BACKLIGHT 25
#define CURRENT_REMOTE 8 /* additional current when remote connected */
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
/* Define this if you have a Motorola SCF5250 */
#define CONFIG_CPU MCF5250
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_COLDFIRE
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_M5636
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "iaudio"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define BOOTLOADER_ENTRYPOINT 0x001F0000
#define FLASH_ENTRYPOINT 0x00001000
#define FLASH_MAGIC 0xfbfbfbf1
/* Define this for FM radio input available */
#define HAVE_FMRADIO_IN
/** Port-specific settings **/
/* Main LCD contrast range and defaults */
#define MIN_CONTRAST_SETTING 1
#define MAX_CONTRAST_SETTING 30
#define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */
/* Main LCD backlight brightness range and defaults */
/* PCF50506 can output 0%-100% duty cycle but D305A expects %15-100%. */
#define MIN_BRIGHTNESS_SETTING 1 /* 15/16 (93.75%) */
#define MAX_BRIGHTNESS_SETTING 13 /* 3/16 (18.75%) */
#define DEFAULT_BRIGHTNESS_SETTING 8 /* 8/16 (50.00%) = x5 boot default */
/* Remote LCD contrast range and defaults */
#define MIN_REMOTE_CONTRAST_SETTING 10
#define MAX_REMOTE_CONTRAST_SETTING 35
#define DEFAULT_REMOTE_CONTRAST_SETTING 24 /* Match boot contrast */
/* Define this if a programmable hotkey is mapped */
//#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink