| .. |
|
archos/av300
|
Straighten out some powermanagement stuff. Give target complete control over how power inputs are sensed. Clean SIMULATOR stuff out of target files. Get rid of USB charging option on targets that don't support it or don't implement it yet. Menu string remains to avoid language incompatibility but should be removed on next cleanup for targets not using it (notice in english.lang). global_settings becomes incompatible for some builds and so plugin API version is incremented.
|
2008-12-03 19:54:25 +00:00 |
|
as3525
|
Fix reds and yellows (hopefully). Some targets apparently didn't properly #ifdef lcd_enable and lcd_sleep code out, so that it got partly active in the bootloader; rename the ui simulator stub fixes most reds; for the clip: move the hook code into lcd-1bit-vert.c which should fix the bootloader red.
|
2009-03-17 03:36:36 +00:00 |
|
imx31
|
Rework lcd_enabled and lcd_set/call_enable hook
|
2009-03-17 02:43:47 +00:00 |
|
ipod
|
One more try: Fix remaining reds and yellows
|
2009-03-17 04:01:11 +00:00 |
|
iriver
|
Fix very last yellows.
|
2009-03-17 04:46:11 +00:00 |
|
olympus
|
Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').
|
2009-02-20 02:33:40 +00:00 |
|
philips
|
Philips SA9200 fixes: (1) boost in the bootloader like the e200 and c200, (2) use the right GPIOs and inits in the SD driver, and (3) add charger detection.
|
2009-03-14 02:47:14 +00:00 |
|
pnx0101
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
s3c2440
|
Okay, this should be the last. I'm sorry for the trouble, but now everything *should* be properly #ifdef'd (which wasn't before) :/
|
2009-03-17 04:22:28 +00:00 |
|
s5l8700
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
sandisk
|
One more try: Fix remaining reds and yellows
|
2009-03-17 04:01:11 +00:00 |
|
tatung/tpj1022
|
Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver.
|
2009-01-27 03:19:57 +00:00 |
|
tcc77x
|
Rework lcd_enabled and lcd_set/call_enable hook
|
2009-03-17 02:43:47 +00:00 |
|
tcc780x
|
Implement udelay() for D2 and remove the old hacks from USB & FM drivers.
|
2009-03-20 23:14:05 +00:00 |
|
tms320dm320
|
Okay, this should be the last. I'm sorry for the trouble, but now everything *should* be properly #ifdef'd (which wasn't before) :/
|
2009-03-17 04:22:28 +00:00 |
|
adc-as3514.c
|
Abstract the PortalPlayer AS3514 handling with an "ascodec" API - inspired by the wmcodec API used with the Wolfson codecs. The intention is to implement this API for the AS3525 and then share code with the Sansa V2 ports.
|
2008-10-31 00:16:42 +00:00 |
|
adc-pp5020.c
|
Make the Philips HDD1630 ADC work: it needs a slightly different init sequence. Also, it only needs 2 channels enabled.
|
2009-01-27 03:36:30 +00:00 |
|
ascodec-pp.c
|
static/const/#include/tab police on various files
|
2009-01-02 21:43:52 +00:00 |
|
ascodec-target.h
|
Fix misspelled function name. Thanks to Jens Arnold for noticing.
|
2008-11-26 05:46:33 +00:00 |
|
ata-as-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-nand-telechips.c
|
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
|
2009-03-02 23:36:12 +00:00 |
|
ata-pp5002.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-pp5020.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-sd-pp.c
|
Philips SA9200 fixes: (1) boost in the bootloader like the e200 and c200, (2) use the right GPIOs and inits in the SD driver, and (3) add charger detection.
|
2009-03-14 02:47:14 +00:00 |
|
ata-sd-target.h
|
Moved microsd_int declaration from system-pp502x.c to ata-sd-target.h
|
2008-06-28 19:36:21 +00:00 |
|
ata-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio-pp.c
|
Fix-m the ruddiness.
|
2008-12-12 11:20:58 +00:00 |
|
crt0-pp-bl.S
|
Dual boot for the Philips HDD1630.
|
2009-01-10 03:21:07 +00:00 |
|
crt0-pp.S
|
Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').
|
2009-02-20 02:33:40 +00:00 |
|
crt0.S
|
Sansa AMS: Use IRAM (in app linker script and crt0.S)
|
2008-11-18 17:15:56 +00:00 |
|
ffs-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.c
|
FM radio for Philips HDD1630. Volume was very faint unless recording was enabled, so do that too.
|
2009-02-13 03:49:17 +00:00 |
|
i2c-telechips.c
|
Telechips I2C: Scale the busy-wait delay based on FREQ, reducing wasted CPU cycles when unboosted (eg. when reading from the D2 touchscreen).
|
2008-12-01 21:02:00 +00:00 |
|
i2s-pp.c
|
Use DMA for audio playback on PP502x (FS#9910 + some further mods). I can't say at this point about any change in battery life but it frees up a percent or two of CPU cycles as measured in the buffering screen. No change in recording transfers yet. Testing seemed to check out so put it out for general use and see what happens.
|
2009-02-19 20:40:03 +00:00 |
|
kernel-pp.c
|
Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c
|
2008-10-29 10:26:46 +00:00 |
|
lcd-as-memframe.S
|
Fix red for target with insanely wide LCDs.
|
2008-07-15 18:59:05 +00:00 |
|
lcd-ssd1815.c
|
Sansa AMS: centralize clock settings in clock-target.h
|
2008-12-04 20:04:31 +00:00 |
|
memcpy-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memmove-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memset-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
memset16-arm.S
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mmu-arm.h
|
Fix header multiple inclusion guard typo.
|
2009-02-12 00:09:12 +00:00 |
|
mmu-arm.S
|
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly.
|
2009-02-11 23:56:00 +00:00 |
|
pcm-pp.c
|
Fix FS#9949 - Song not playing, noise instead. Stale code was left from before transferring in segments and one calculation was just wrong for limiting trasfer size. Make buffer aligning consistent, change <= 0 on size_t variable to == 0 and remove pointless limit on overall buffer size.
|
2009-03-07 05:21:58 +00:00 |
|
pcm-telechips.c
|
Get rid of some pcm_apply_settings cruft at the low level I somehow missed. Move the ones in pcm.c around to better spots. Remove a variable from pcm-pnx0101.c that should no longer be there.
|
2008-12-12 12:46:57 +00:00 |
|
powermgmt-ascodec.c
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
system-arm.c
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
system-arm.h
|
ARMv6: Optimize interrupt enable/disable with cpsie and cpsid. Section off system-arm.h by ARM_ARCH rather than checking within each implementation.
|
2009-02-02 03:51:50 +00:00 |
|
system-pp502x.c
|
Philips SA9200 fixes: (1) boost in the bootloader like the e200 and c200, (2) use the right GPIOs and inits in the SD driver, and (3) add charger detection.
|
2009-03-14 02:47:14 +00:00 |
|
system-pp5002.c
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
system-target.h
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
usb-drv-arc.c
|
Make USB on sansas more reliable (FS#10026). Both fixes by Toni Hellmann
|
2009-03-17 20:24:55 +00:00 |
|
usb-fw-pp502x.c
|
Make USB on sansas more reliable (FS#10026). Both fixes by Toni Hellmann
|
2009-03-17 20:24:55 +00:00 |
|
usb-fw-pp5002.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-target.h
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
usb-tcc.c
|
Implement udelay() for D2 and remove the old hacks from USB & FM drivers.
|
2009-03-20 23:14:05 +00:00 |
|
wmcodec-pp.c
|
FS#9591 by Anton Veretenenko for the Philips GoGear HDD1620/1630 (with a few changes by me). Fixes boot problem, pixel format, sound, and a few other things.
|
2008-12-12 04:56:25 +00:00 |
|
wmcodec-telechips.c
|
D2 also needs audiohw_preinit()
|
2008-11-28 23:44:06 +00:00 |
343c3b795a