Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/lcd-recorder.c
Kjell Ericson 75361e5e44 Stop scrolling text when lcd_clear_display() has been called. 
Added call to lcd_update() for Recorder simulator.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@3084 a1c6a512-1295-4272-9138-f99709370657
2003-01-14 13:51:09 +00:00

915 lines
22 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Alan Korr
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#ifdef HAVE_LCD_BITMAP
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include <string.h>
#include <stdlib.h>
#include "file.h"
#include "debug.h"
#include "system.h"
#include "font.h"
/*** definitions ***/
#define LCD_SET_LOWER_COLUMN_ADDRESS ((char)0x00)
#define LCD_SET_HIGHER_COLUMN_ADDRESS ((char)0x10)
#define LCD_SET_INTERNAL_REGULATOR_RESISTOR_RATIO ((char)0x20)
#define LCD_SET_POWER_CONTROL_REGISTER ((char)0x28)
#define LCD_SET_DISPLAY_START_LINE ((char)0x40)
#define LCD_SET_CONTRAST_CONTROL_REGISTER ((char)0x81)
#define LCD_SET_SEGMENT_REMAP ((char)0xA0)
#define LCD_SET_LCD_BIAS ((char)0xA2)
#define LCD_SET_ENTIRE_DISPLAY_OFF ((char)0xA4)
#define LCD_SET_ENTIRE_DISPLAY_ON ((char)0xA5)
#define LCD_SET_NORMAL_DISPLAY ((char)0xA6)
#define LCD_SET_REVERSE_DISPLAY ((char)0xA7)
#define LCD_SET_INDICATOR_OFF ((char)0xAC)
#define LCD_SET_INDICATOR_ON ((char)0xAD)
#define LCD_SET_DISPLAY_OFF ((char)0xAE)
#define LCD_SET_DISPLAY_ON ((char)0xAF)
#define LCD_SET_PAGE_ADDRESS ((char)0xB0)
#define LCD_SET_COM_OUTPUT_SCAN_DIRECTION ((char)0xC0)
#define LCD_SET_DISPLAY_OFFSET ((char)0xD3)
#define LCD_SET_READ_MODIFY_WRITE_MODE ((char)0xE0)
#define LCD_SOFTWARE_RESET ((char)0xE2)
#define LCD_NOP ((char)0xE3)
#define LCD_SET_END_OF_READ_MODIFY_WRITE_MODE ((char)0xEE)
/* LCD command codes */
#define LCD_CNTL_RESET 0xe2 // Software reset
#define LCD_CNTL_POWER 0x2f // Power control
#define LCD_CNTL_CONTRAST 0x81 // Contrast
#define LCD_CNTL_OUTSCAN 0xc8 // Output scan direction
#define LCD_CNTL_SEGREMAP 0xa1 // Segment remap
#define LCD_CNTL_DISPON 0xaf // Display on
#define LCD_CNTL_PAGE 0xb0 // Page address
#define LCD_CNTL_HIGHCOL 0x10 // Upper column address
#define LCD_CNTL_LOWCOL 0x00 // Lower column address
#define SCROLL_SPACING 3
#define SCROLLABLE_LINES 10
#define SCROLL_MODE_OFF 0
#define SCROLL_MODE_PAUSE 1
#define SCROLL_MODE_RUN 2
struct scrollinfo {
int mode;
char line[MAX_PATH + LCD_WIDTH/2 + SCROLL_SPACING + 2];
int len; /* length of line in chars */
int width; /* length of line in pixels */
int offset;
int startx;
int starty;
bool backward; /* scroll presently forward or backward? */
bool bidir;
long start_tick;
};
static void scroll_thread(void);
static char scroll_stack[DEFAULT_STACK_SIZE];
static char scroll_name[] = "scroll";
static char scroll_speed = 8; /* updates per second */
static int scroll_delay = HZ/2; /* ticks delay before start */
static char scroll_step = 6; /* pixels per scroll step */
static int bidir_limit = 50; /* percent */
static struct scrollinfo scroll[SCROLLABLE_LINES];
static int xmargin = 0;
static int ymargin = 0;
static int curfont = FONT_SYSFIXED;
#ifndef SIMULATOR
static
#endif
unsigned char lcd_framebuffer[LCD_WIDTH][LCD_HEIGHT/8];
/* All zeros and ones bitmaps for area filling */
static unsigned char zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
static unsigned char ones[8] = { 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff};
#ifdef SIMULATOR
void lcd_init(void)
{
create_thread(scroll_thread, scroll_stack,
sizeof(scroll_stack), scroll_name);
}
#else
/*
* Initialize LCD
*/
void lcd_init (void)
{
/* Initialize PB0-3 as output pins */
PBCR2 &= 0xff00; /* MD = 00 */
PBIOR |= 0x000f; /* IOR = 1 */
lcd_clear_display();
lcd_update();
create_thread(scroll_thread, scroll_stack,
sizeof(scroll_stack), scroll_name);
}
/*
* Update the display.
* This must be called after all other LCD functions that change the display.
*/
void lcd_update (void) __attribute__ ((section (".icode")));
void lcd_update (void)
{
int x, y;
/* Copy display bitmap to hardware */
for (y = 0; y < LCD_HEIGHT/8; y++)
{
lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
lcd_write (true, LCD_CNTL_HIGHCOL);
lcd_write (true, LCD_CNTL_LOWCOL);
for (x = 0; x < LCD_WIDTH; x++)
lcd_write (false, lcd_framebuffer[x][y]);
}
}
/*
* Update a fraction of the display.
*/
void lcd_update_rect (int, int, int, int) __attribute__ ((section (".icode")));
void lcd_update_rect (int x_start, int y,
int width, int height)
{
int ymax;
int xmax;
int x;
/* The Y coordinates have to work on even 8 pixel rows */
ymax = (y + height)/8;
y /= 8;
xmax = x_start + width;
if(xmax > LCD_WIDTH)
xmax = LCD_WIDTH;
if(ymax >= LCD_HEIGHT/8)
ymax = LCD_HEIGHT/8-1;
/* Copy specified rectange bitmap to hardware */
for (; y <= ymax; y++)
{
lcd_write (true, LCD_CNTL_PAGE | (y & 0xf));
lcd_write (true, LCD_CNTL_HIGHCOL | ((x_start>>4) & 0xf));
lcd_write (true, LCD_CNTL_LOWCOL | (x_start & 0xf));
for (x = x_start; x < xmax; x++)
lcd_write (false, lcd_framebuffer[x][y]);
}
}
void lcd_set_contrast(int val)
{
lcd_write(true, LCD_CNTL_CONTRAST);
lcd_write(true, val);
}
/**
* Rolls up the lcd display by the specified amount of lines.
* Lines that are rolled out over the top of the screen are
* rolled in from the bottom again. This is a hardware
* remapping only and all operations on the lcd are affected.
* ->
* @param int lines - The number of lines that are rolled.
* The value must be 0 <= pixels < LCD_HEIGHT.
*/
void lcd_roll(int lines)
{
lcd_write(true, LCD_SET_DISPLAY_START_LINE | (lines & (LCD_HEIGHT-1)));
}
#endif /* SIMULATOR */
void lcd_clear_display (void)
{
memset (lcd_framebuffer, 0, sizeof lcd_framebuffer);
lcd_stop_scroll();
}
void lcd_setmargins(int x, int y)
{
xmargin = x;
ymargin = y;
}
int lcd_getxmargin(void)
{
return xmargin;
}
int lcd_getymargin(void)
{
return ymargin;
}
void lcd_setfont(int newfont)
{
curfont = newfont;
}
int lcd_getstringsize(unsigned char *str, int *w, int *h)
{
struct font* pf = font_get(curfont);
int ch;
int width = 0;
while((ch = *str++)) {
/* check input range*/
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* get proportional width and glyph bits*/
width += pf->width? pf->width[ch]: pf->maxwidth;
}
if ( w )
*w = width;
if ( h )
*h = pf->height;
return width;
}
/* put a string at a given char position */
void lcd_puts(int x, int y, unsigned char *str)
{
int xpos,ypos,w,h;
#if defined(SIMULATOR) && defined(HAVE_LCD_CHARCELLS)
/* We make the simulator truncate the string if it reaches the right edge,
as otherwise it'll wrap. The real target doesn't wrap. */
char buffer[12];
if(strlen(str)+x > 11 ) {
strncpy(buffer, str, sizeof buffer);
buffer[11-x]=0;
str = buffer;
}
xmargin = 0;
ymargin = 8;
#endif
if(!str || !str[0])
return;
lcd_getstringsize(str, &w, &h);
xpos = xmargin + x*w / strlen(str);
ypos = ymargin + y*h;
lcd_putsxy(xpos, ypos, str);
lcd_clearrect(xpos + w, ypos, LCD_WIDTH - (xpos + w), h);
#if defined(SIMULATOR)
lcd_update();
#endif
}
/* put a string at a given pixel position, skipping first ofs pixel columns */
static void lcd_putsxyofs(int x, int y, int ofs, unsigned char *str)
{
int ch;
struct font* pf = font_get(curfont);
while ((ch = *str++) != '\0' && x < LCD_WIDTH)
{
int width;
/* check input range */
if (ch < pf->firstchar || ch >= pf->firstchar+pf->size)
ch = pf->defaultchar;
ch -= pf->firstchar;
/* no partial-height drawing for now... */
if (y + pf->height > LCD_HEIGHT)
break;
/* get proportional width and glyph bits */
width = pf->width ? pf->width[ch] : pf->maxwidth;
width = MIN (width, LCD_WIDTH - x);
if (ofs != 0)
{
if (ofs > width)
{
ofs -= width;
continue;
}
width -= ofs;
}
if (width > 0)
{
int rows = (pf->height + 7) / 8;
bitmap_t* bits = pf->bits +
(pf->offset ? pf->offset[ch] : (pf->height * ch));
lcd_bitmap (((unsigned char*) bits) + ofs*rows, x, y,
width, pf->height, true);
x += width;
}
ofs = 0;
}
}
/* put a string at a given pixel position */
void lcd_putsxy(int x, int y, unsigned char *str)
{
lcd_putsxyofs(x, y, 0, str);
}
/*
* All bitmaps have this format:
* Bits within a byte are arranged veritcally, LSB at top.
* Bytes are stored in column-major format, with byte 0 at top left,
* byte 1 is 2nd from top, etc. Bytes following left-most column
* starts 2nd left column, etc.
*
* Note: The HW takes bitmap bytes in row-major order.
*
* Memory copy of display bitmap
*/
/*
* Draw a bitmap at (x, y), size (nx, ny)
* if 'clear' is true, clear destination area first
*/
void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
bool clear) __attribute__ ((section (".icode")));
void lcd_bitmap (unsigned char *src, int x, int y, int nx, int ny,
bool clear)
{
unsigned char *dst;
unsigned char *dst2;
unsigned int data, mask, mask2, mask3, mask4;
int shift;
if (((unsigned)x >= LCD_WIDTH) || ((unsigned)y >= LCD_HEIGHT))
return;
if (((unsigned)(x + nx)) >= LCD_WIDTH)
nx = LCD_WIDTH - x;
if (((unsigned)(y + ny)) >= LCD_HEIGHT)
ny = LCD_HEIGHT - y;
shift = y & 7;
dst2 = &lcd_framebuffer[x][y/8];
ny += shift;
/* Calculate bit masks */
mask4 = ~(0xfe << ((ny-1) & 7));
if (clear)
{
mask = ~(0xff << shift);
mask2 = 0;
mask3 = ~mask4;
if (ny <= 8)
mask3 |= mask;
}
else
mask = mask2 = mask3 = 0xff;
/* Loop for each column */
for (x = 0; x < nx; x++)
{
dst = dst2;
dst2 += LCD_HEIGHT/8;
data = 0;
y = 0;
if (ny > 8)
{
/* First partial row */
data = *src++ << shift;
*dst = (*dst & mask) | data;
data >>= 8;
dst++;
/* Intermediate rows */
for (y = 8; y < ny-8; y += 8)
{
data |= *src++ << shift;
*dst = (*dst & mask2) | data;
data >>= 8;
dst++;
}
}
/* Last partial row */
if (y + shift < ny)
data |= *src++ << shift;
*dst = (*dst & mask3) | (data & mask4);
}
}
/*
* Draw a rectangle with upper left corner at (x, y)
* and size (nx, ny)
*/
void lcd_drawrect (int x, int y, int nx, int ny)
{
int i;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
/* vertical lines */
for (i = 0; i < ny; i++) {
DRAW_PIXEL(x, (y + i));
DRAW_PIXEL((x + nx - 1), (y + i));
}
/* horizontal lines */
for (i = 0; i < nx; i++) {
DRAW_PIXEL((x + i),y);
DRAW_PIXEL((x + i),(y + ny - 1));
}
}
/*
* Clear a rectangular area at (x, y), size (nx, ny)
*/
void lcd_clearrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_bitmap (zeros, x+i, y, 1, ny, true);
}
/*
* Fill a rectangular area at (x, y), size (nx, ny)
*/
void lcd_fillrect (int x, int y, int nx, int ny)
{
int i;
for (i = 0; i < nx; i++)
lcd_bitmap (ones, x+i, y, 1, ny, true);
}
/* Invert a rectangular area at (x, y), size (nx, ny) */
void lcd_invertrect (int x, int y, int nx, int ny)
{
int i, j;
if (x > LCD_WIDTH)
return;
if (y > LCD_HEIGHT)
return;
if (x + nx > LCD_WIDTH)
nx = LCD_WIDTH - x;
if (y + ny > LCD_HEIGHT)
ny = LCD_HEIGHT - y;
for (i = 0; i < nx; i++)
for (j = 0; j < ny; j++)
INVERT_PIXEL((x + i), (y + j));
}
void lcd_drawline( int x1, int y1, int x2, int y2 )
{
int numpixels;
int i;
int deltax, deltay;
int d, dinc1, dinc2;
int x, xinc1, xinc2;
int y, yinc1, yinc2;
deltax = abs(x2 - x1);
deltay = abs(y2 - y1);
if(deltax >= deltay)
{
numpixels = deltax;
d = 2 * deltay - deltax;
dinc1 = deltay * 2;
dinc2 = (deltay - deltax) * 2;
xinc1 = 1;
xinc2 = 1;
yinc1 = 0;
yinc2 = 1;
}
else
{
numpixels = deltay;
d = 2 * deltax - deltay;
dinc1 = deltax * 2;
dinc2 = (deltax - deltay) * 2;
xinc1 = 0;
xinc2 = 1;
yinc1 = 1;
yinc2 = 1;
}
numpixels++; /* include endpoints */
if(x1 > x2)
{
xinc1 = -xinc1;
xinc2 = -xinc2;
}
if(y1 > y2)
{
yinc1 = -yinc1;
yinc2 = -yinc2;
}
x = x1;
y = y1;
for(i=0; i<numpixels; i++)
{
DRAW_PIXEL(x,y);
if(d < 0)
{
d += dinc1;
x += xinc1;
y += yinc1;
}
else
{
d += dinc2;
x += xinc2;
y += yinc2;
}
}
}
void lcd_clearline( int x1, int y1, int x2, int y2 )
{
int numpixels;
int i;
int deltax, deltay;
int d, dinc1, dinc2;
int x, xinc1, xinc2;
int y, yinc1, yinc2;
deltax = abs(x2 - x1);
deltay = abs(y2 - y1);
if(deltax >= deltay)
{
numpixels = deltax;
d = 2 * deltay - deltax;
dinc1 = deltay * 2;
dinc2 = (deltay - deltax) * 2;
xinc1 = 1;
xinc2 = 1;
yinc1 = 0;
yinc2 = 1;
}
else
{
numpixels = deltay;
d = 2 * deltax - deltay;
dinc1 = deltax * 2;
dinc2 = (deltax - deltay) * 2;
xinc1 = 0;
xinc2 = 1;
yinc1 = 1;
yinc2 = 1;
}
numpixels++; /* include endpoints */
if(x1 > x2)
{
xinc1 = -xinc1;
xinc2 = -xinc2;
}
if(y1 > y2)
{
yinc1 = -yinc1;
yinc2 = -yinc2;
}
x = x1;
y = y1;
for(i=0; i<numpixels; i++)
{
CLEAR_PIXEL(x,y);
if(d < 0)
{
d += dinc1;
x += xinc1;
y += yinc1;
}
else
{
d += dinc2;
x += xinc2;
y += yinc2;
}
}
}
/*
* Set a single pixel
*/
void lcd_drawpixel(int x, int y)
{
DRAW_PIXEL(x,y);
}
/*
* Clear a single pixel
*/
void lcd_clearpixel(int x, int y)
{
CLEAR_PIXEL(x,y);
}
/*
* Invert a single pixel
*/
void lcd_invertpixel(int x, int y)
{
INVERT_PIXEL(x,y);
}
void lcd_puts_scroll(int x, int y, unsigned char* string)
{
struct scrollinfo* s;
int w, h;
int index;
/* search for the next free entry */
for (index = 0; index < SCROLLABLE_LINES; index++) {
s = &scroll[index];
if (s->mode == SCROLL_MODE_OFF) {
break;
}
}
s->start_tick = current_tick + scroll_delay;
lcd_puts(x,y,string);
lcd_getstringsize(string, &w, &h);
if (LCD_WIDTH - x * 8 - xmargin < w) {
/* prepare scroll line */
char *end;
memset(s->line, 0, sizeof s->line);
strcpy(s->line, string);
/* get width */
s->width = lcd_getstringsize(s->line, &w, &h);
/* scroll bidirectional or forward only depending on the string width */
if ( bidir_limit ) {
s->bidir = s->width < (LCD_WIDTH - xmargin) *
(100 + bidir_limit) / 100;
}
else
s->bidir = false;
if (!s->bidir) { /* add spaces if scrolling in the round */
strcat(s->line, " ");
/* get new width incl. spaces */
s->width = lcd_getstringsize(s->line, &w, &h);
}
for (end = s->line; *end; end++);
strncpy(end, string, LCD_WIDTH/2);
s->mode = SCROLL_MODE_RUN;
s->len = strlen(string);
s->offset = 0;
s->startx = x;
s->starty = y;
s->backward = false;
}
}
void lcd_stop_scroll(void)
{
struct scrollinfo* s;
int w,h;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->mode == SCROLL_MODE_RUN ||
s->mode == SCROLL_MODE_PAUSE ) {
lcd_getstringsize(s->line, &w, &h);
lcd_clearrect(xmargin + s->startx * w / s->len,
ymargin + s->starty * h,
LCD_WIDTH - xmargin,
h);
/* restore scrolled row */
lcd_puts(s->startx, s->starty, s->line);
s->mode = SCROLL_MODE_OFF;
}
}
lcd_update();
}
void lcd_stop_scroll_line(int line)
{
struct scrollinfo* s;
int w,h;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->startx == line &&
( s->mode == SCROLL_MODE_RUN ||
s->mode == SCROLL_MODE_PAUSE )) {
lcd_getstringsize(s->line, &w, &h);
lcd_clearrect(xmargin + s->startx * w / s->len,
ymargin + s->starty * h,
LCD_WIDTH - xmargin,
h);
/* restore scrolled row */
lcd_puts(s->startx, s->starty, s->line);
s->mode = SCROLL_MODE_OFF;
}
}
lcd_update();
}
void lcd_scroll_pause(void)
{
struct scrollinfo* s;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->mode == SCROLL_MODE_RUN ) {
s->mode = SCROLL_MODE_PAUSE;
}
}
}
void lcd_scroll_pause_line(int line)
{
struct scrollinfo* s;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->startx == line &&
s->mode == SCROLL_MODE_RUN ) {
s->mode = SCROLL_MODE_PAUSE;
}
}
}
void lcd_scroll_resume(void)
{
struct scrollinfo* s;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->mode == SCROLL_MODE_PAUSE ) {
s->mode = SCROLL_MODE_RUN;
}
}
}
void lcd_scroll_resume_line(int line)
{
struct scrollinfo* s;
int index;
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
if ( s->startx == line &&
s->mode == SCROLL_MODE_PAUSE ) {
s->mode = SCROLL_MODE_RUN;
}
}
}
void lcd_scroll_speed(int speed)
{
scroll_speed = speed;
}
void lcd_scroll_step(int step)
{
scroll_step = step;
}
void lcd_scroll_delay(int ms)
{
scroll_delay = ms / (HZ / 10);
}
void lcd_bidir_scroll(int percent)
{
bidir_limit = percent;
}
static void scroll_thread(void)
{
struct scrollinfo* s;
int index;
int w, h;
int xpos, ypos;
/* initialize scroll struct array */
for (index = 0; index < SCROLLABLE_LINES; index++) {
scroll[index].mode = SCROLL_MODE_OFF;
}
while ( 1 ) {
for ( index = 0; index < SCROLLABLE_LINES; index++ ) {
s = &scroll[index];
/* really scroll? */
if ( s->mode != SCROLL_MODE_RUN )
continue;
/* check pause */
if (TIME_BEFORE(current_tick, s->start_tick))
continue;
if (s->backward)
s->offset -= scroll_step;
else
s->offset += scroll_step;
if (s->bidir) { /* scroll bidirectional */
if (s->offset <= 0) {
/* at beginning of line */
s->offset = 0;
s->backward = false;
s->start_tick = current_tick + scroll_delay * 2;
}
if (s->offset >= s->width - (LCD_WIDTH - xmargin)) {
/* at end of line */
s->offset = s->width - (LCD_WIDTH - xmargin);
s->backward = true;
s->start_tick = current_tick + scroll_delay * 2;
}
}
else {
/* scroll forward the whole time */
if (s->offset >= s->width)
s->offset %= s->width;
}
lcd_getstringsize(s->line, &w, &h);
xpos = xmargin + s->startx * w / s->len;
ypos = ymargin + s->starty * h;
lcd_clearrect(xpos, ypos, LCD_WIDTH - xmargin, h);
lcd_putsxyofs(xpos, ypos, s->offset, s->line);
lcd_update_rect(xpos, ypos, LCD_WIDTH - xmargin, h);
}
sleep(HZ/scroll_speed);
}
}
#endif
/* -----------------------------------------------------------------
* local variables:
* eval: (load-file "../rockbox-mode.el")
* end:
*/
Reference in a new issue View git blame Copy permalink