Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm
History
Björn Stenberg 2f7cffa204 Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16279 a1c6a512-1295-4272-9138-f99709370657
2008-02-11 14:26:25 +00:00
..
archos/av300 Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 2007-08-14 22:06:23 +00:00
imx31 Oops. Tiny goof. 2008-02-09 08:05:01 +00:00
ipod Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
iriver H10-20GB: Commit the first patch in FS#8533 to fix the mpegplayer display problem where only half the data was reaching the display on some players. Two individuals report that it corrects it. 2008-02-01 02:02:38 +00:00
olympus/mrobe-100 mrobe 100: (1) device reset in system_init is same as H10. (2) make power_off actually work. 2008-02-03 00:04:02 +00:00
pnx0101 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
s3c2440 Use the timeout API as a oneshot for headphone plug debouncing. Set at 1s for now which seems comfortable and was good for meg-fx but target-specific adjustment is easy enough (my 3G hp jack is dead so I can't check that one :( ). Do some minor rearrangements for init safety and consistency. 2008-01-27 21:13:04 +00:00
sandisk Some misc. ATA stuff: Increase threads' priority (important for idle callbacks to get done faster). Use a simpler loop for ata thread. Add a balancing mutex_lock call to ata_init (oops). 2008-02-11 07:42:11 +00:00
tatung/tpj1022 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc77x Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc780x D2: Add auto-detection of the SAMSUNG flash chips used in the 2/4/8Gb 2008-01-27 18:50:09 +00:00
tms320dm320 Finally, out goes struct spinlock for anything but mutiprocessor targets where it becomes a reenterable corelock. 2008-01-18 13:12:33 +00:00
adc-pp5020.c make mrobe100 work again 2008-02-10 16:06:01 +00:00
ata-as-arm.S Improved CPU clock setup for PP502x. PP5020 and PP5022 are not register compatible here, so define the PP5022 targets properly, and introduce a CPU_PP502x macro for easier family check. Improves stability on PP5020 (less freezing, tested with Mini G1) and reduces clock change penalty (500us on PP5020; uses the relock bit on PP5022). 2007-07-02 05:16:40 +00:00
ata-pp5002.c
ata-pp5020.c Restore a line accidentally removed by r15705 2007-11-20 07:52:37 +00:00
ata-target.h PP5002 ATA driver needs to wait for the controller to be ready again before writing the next control register value. Makes check_registers() not fail in the bootloader. 2007-08-03 09:34:42 +00:00
audio-pp.c Hopefully fix line-in recording on PortalPlayer targets (H10 in particular). 2007-11-11 23:41:54 +00:00
crt0-pp-bl.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
crt0-pp.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
i2c-pp.c Portal player i2c driver: More struct spinlock phaseout. 2007-11-12 07:58:54 +00:00
i2c-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00
i2s-pp.c Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs. 2007-10-16 04:19:18 +00:00
lcd-as-memframe.S More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. 2007-10-21 23:12:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
mmu-arm.h Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
pcm-pp.c audio on the m:robe 100 2008-01-20 12:59:23 +00:00
system-arm.h Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound. 2007-10-06 22:27:27 +00:00
system-pp502x.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
system-pp5002.c Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
system-target.h Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 2008-02-11 14:26:25 +00:00
usb-fw-pp502x.c Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 2008-02-11 14:26:25 +00:00
usb-fw-pp5002.c FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. 2007-09-04 08:03:07 +00:00
usb-target.h
wmcodec-pp.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
wmcodec-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00