Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config.h
Dana Conrad 3e7a09cb0d New Port: Eros Q Native 
What works:
- LCD: 16-bit RGB565
- all buttons, including scrollwheel
- SD Card
- Battery level and charging/not charging status
- USB
- audio
- sample rate switching
- HP / LO detect, with "safe" fixed LO volume -
   LO volume will only be put to user-defined max volume
   if headphones are not present.
- rtc
- Plugins build, tried a couple and they seem OK
- Bootloader, installable to nand via usbboot

What doesn't work:
- Dual Boot
- power on/off has intermittent, low volume audio click
   (sometimes it's completely silent, sometimes there's
    a click)
- Audio uses 16-bit volume scaling, so clicking/popping
   is pretty bad at lower volumes - need 32 bit volume
   scaling, 24 bit I2S data
- USB HID keys not yet defined
- no jztool support

Unknowns:
- Stereo Switch pins: Direction select, AC_DC
   (probably not even hooked up)
- What is the actual purpose of the Stereo Swtich?
- How does the bluetooth module connect?

"Someday" stuff:
- get LCD working at higher bit depth
- Bluetooth

Change-Id: I70dda8fc092c6e3f4352f2245e4164193f803c33
2021-07-18 12:14:35 +00:00

1276 lines
40 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Daniel Stenberg
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __CONFIG_H__
#define __CONFIG_H__
#include "autoconf.h"
/* symbolic names for multiple choice configurations: */
/* CONFIG_STORAGE (note these are combineable bit-flags) */
#define STORAGE_ATA_NUM 0
#define STORAGE_MMC_NUM 1
#define STORAGE_SD_NUM 2
#define STORAGE_NAND_NUM 3
#define STORAGE_RAMDISK_NUM 4
#define STORAGE_USB_NUM 5
#define STORAGE_HOSTFS_NUM 6
#define STORAGE_NUM_TYPES 7
#define STORAGE_ATA (1 << STORAGE_ATA_NUM)
#define STORAGE_MMC (1 << STORAGE_MMC_NUM)
#define STORAGE_SD (1 << STORAGE_SD_NUM)
#define STORAGE_NAND (1 << STORAGE_NAND_NUM)
#define STORAGE_RAMDISK (1 << STORAGE_RAMDISK_NUM)
#define STORAGE_USB (1 << STORAGE_USB_NUM)
/* meant for APPLICATION targets (implicit for SIMULATOR) */
#define STORAGE_HOSTFS (1 << STORAGE_HOSTFS_NUM)
/* CONFIG_TUNER (note these are combineable bit-flags) */
#define TEA5767 0x02 /* Philips */
#define LV24020LP 0x04 /* Sanyo */
#define SI4700 0x08 /* Silicon Labs */
#define TEA5760 0x10 /* Philips */
#define LV240000 0x20 /* Sanyo */
#define IPOD_REMOTE_TUNER 0x40 /* Apple */
#define RDA5802 0x80 /* RDA Microelectronics */
#define STFM1000 0x100 /* Sigmatel */
/* CONFIG_CPU */
#define MCF5249 5249
#define MCF5250 5250
#define PP5002 5002
#define PP5020 5020
#define PP5022 5022
#define PP5024 5024
#define PP6100 6100
#define PNX0101 101
#define S3C2440 2440
#define DSC25 25
#define DM320 320
#define IMX31L 31
#define TCC7801 7801
#define S5L8700 8700
#define S5L8701 8701
#define S5L8702 8702
#define JZ4732 4732
#define JZ4760B 47602
#define AS3525 3525
#define AT91SAM9260 9260
#define AS3525v2 35252
#define IMX233 233
#define RK27XX 2700
#define X1000 1000
/* platforms
* bit fields to allow PLATFORM_HOSTED to be OR'ed e.g. with a
* possible future PLATFORM_ANDROID (some OSes might need totally different
* handling to run on them than a stand-alone application) */
#define PLATFORM_NATIVE (1<<0)
#define PLATFORM_HOSTED (1<<1)
#define PLATFORM_ANDROID (1<<2)
#define PLATFORM_SDL (1<<3)
#define PLATFORM_MAEMO4 (1<<4)
#define PLATFORM_MAEMO5 (1<<5)
#define PLATFORM_MAEMO (PLATFORM_MAEMO4|PLATFORM_MAEMO5)
#define PLATFORM_PANDORA (1<<6)
/* CONFIG_KEYPAD */
#define IRIVER_H100_PAD 4
#define IRIVER_H300_PAD 5
#define IAUDIO_X5M5_PAD 6
#define IPOD_4G_PAD 7
#define IPOD_3G_PAD 8
#define IPOD_1G2G_PAD 9
#define GIGABEAT_PAD 11
#define IRIVER_H10_PAD 12
#define SANSA_E200_PAD 13
#define SANSA_C200_PAD 14
#define TATUNG_TPJ1022_PAD 15
#define MROBE100_PAD 17
#define MROBE500_PAD 18
#define GIGABEAT_S_PAD 19
#define COWON_D2_PAD 22
#define IAUDIO_M3_PAD 23
#define CREATIVEZVM_PAD 24
#define SANSA_M200_PAD 25
#define CREATIVEZV_PAD 26
#define PHILIPS_SA9200_PAD 27
#define PHILIPS_HDD1630_PAD 29
#define MEIZU_M6SL_PAD 30
#define ONDAVX747_PAD 31
#define ONDAVX767_PAD 32
#define MEIZU_M6SP_PAD 33
#define MEIZU_M3_PAD 34
#define SANSA_CLIP_PAD 35
#define SANSA_FUZE_PAD 36
#define LYRE_PROTO1_PAD 37
#define SAMSUNG_YH820_PAD 38
#define ONDAVX777_PAD 39
#define SAMSUNG_YPS3_PAD 40
#define MINI2440_PAD 41
#define PHILIPS_HDD6330_PAD 42
#define PBELL_VIBE500_PAD 43
#define MPIO_HD200_PAD 44
#define ANDROID_PAD 45
#define SDL_PAD 46
#define MPIO_HD300_PAD 47
#define SANSA_FUZEPLUS_PAD 48
#define RK27XX_GENERIC_PAD 49
#define HM60X_PAD 50
#define HM801_PAD 51
#define SANSA_CONNECT_PAD 52
#define SAMSUNG_YPR0_PAD 53
#define CREATIVE_ZENXFI2_PAD 54
#define CREATIVE_ZENXFI3_PAD 55
#define MA_PAD 56
#define SONY_NWZ_PAD 57
#define CREATIVE_ZEN_PAD 58
#define SAMSUNG_YPZ5_PAD 59
#define IHIFI_PAD 60
#define SAMSUNG_YPR1_PAD 61
#define SAMSUNG_YH92X_PAD 62
#define DX50_PAD 63
#define SONY_NWZA860_PAD 64 /* The NWZ-A860 is too different (touchscreen) */
#define AGPTEK_ROCKER_PAD 65
#define XDUOO_X3_PAD 66
#define IHIFI_770_PAD 67
#define IHIFI_800_PAD 68
#define XDUOO_X3II_PAD 69
#define XDUOO_X20_PAD 70
#define FIIO_M3K_LINUX_PAD 71
#define EROSQ_PAD 72
#define FIIO_M3K_PAD 73
#define SHANLING_Q1_PAD 74
/* CONFIG_REMOTE_KEYPAD */
#define H100_REMOTE 1
#define H300_REMOTE 2
#define IAUDIO_REMOTE 3
#define MROBE_REMOTE 4
/* CONFIG_BACKLIGHT_FADING */
/* No fading capabilities at all (yet) */
#define BACKLIGHT_NO_FADING 0x0
/* Backlight fading is controlled using a hardware PWM mechanism */
#define BACKLIGHT_FADING_PWM 0x1
/* Backlight is controlled using a software implementation
* BACKLIGHT_FADING_SW_SETTING means that backlight is turned on by only setting
* the brightness (i.e. no real difference between backlight_on and
* backlight_set_brightness)
* BACKLIGHT_FADING_SW_HW_REG means that backlight brightness is restored
* "in hardware", from a hardware register upon backlight_on
* Both types need to have minor adjustments in the software fading code */
#define BACKLIGHT_FADING_SW_SETTING 0x2
#define BACKLIGHT_FADING_SW_HW_REG 0x4
/* Backlight fading is done in a target specific way
* for example in hardware, but not controllable*/
#define BACKLIGHT_FADING_TARGET 0x8
/* CONFIG_CHARGING */
/* Generic types */
#define CHARGING_SIMPLE 1 /* Simple, hardware controlled charging
* (CPU cannot read charger state but may read
* when power is plugged-in). */
#define CHARGING_MONITOR 2 /* Hardware controlled charging with monitoring
* (CPU is able to read HW charging state and
* when power is plugged-in). */
/* Mostly target-specific code in the /target tree */
#define CHARGING_TARGET 3 /* Any algorithm - usually software controlled
* charging or specific programming is required to
* use the charging hardware. */
/* CONFIG_BATTERY_MEASURE bits */
#define VOLTAGE_MEASURE 1 /* Target can report battery voltage
* Usually native ports */
#define PERCENTAGE_MEASURE 2 /* Target can report remaining capacity in %
* Usually application/hosted ports */
#define TIME_MEASURE 4 /* Target can report remaining time estimation
Usually application ports, and only
if the estimation is better that ours
(which it probably is) */
/* CONFIG_LCD */
#define LCD_SSD1815 1 /* as used by Sansa M200 and others */
#define LCD_S1D15E06 3 /* as used by iRiver H100 series */
#define LCD_H300 4 /* as used by iRiver H300 series, exact model name is
unknown at the time of this writing */
#define LCD_X5 5 /* as used by iAudio X5 series, exact model name is
unknown at the time of this writing */
#define LCD_IPODCOLOR 6 /* as used by iPod Color/Photo */
#define LCD_IPODNANO 7 /* as used by iPod Nano */
#define LCD_IPODVIDEO 8 /* as used by iPod Video */
#define LCD_IPOD2BPP 9 /* as used by all fullsize greyscale iPods */
#define LCD_IPODMINI 10 /* as used by iPod Mini g1/g2 */
#define LCD_GIGABEAT 12
#define LCD_H10_20GB 13 /* as used by iriver H10 20Gb */
#define LCD_H10_5GB 14 /* as used by iriver H10 5Gb */
#define LCD_TPJ1022 15 /* as used by Tatung Elio TPJ-1022 */
#define LCD_C200 17 /* as used by Sandisk Sansa c200 */
#define LCD_MROBE500 18 /* as used by Olympus M:Robe 500i */
#define LCD_MROBE100 19 /* as used by Olympus M:Robe 100 */
#define LCD_CREATIVEZVM 22 /* as used by Creative Zen Vision:M */
#define LCD_TL0350A 23 /* as used by the iAudio M3 remote, treated as main LCD */
#define LCD_COWOND2 24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */
#define LCD_SA9200 25 /* as used by the Philips SA9200 */
#define LCD_S6B33B2 26 /* as used by the Samsumg YH820 */
#define LCD_HDD1630 27 /* as used by the Philips HDD1630 */
#define LCD_MEIZUM6 28 /* as used by the Meizu M6SP and M6SL (various models) */
#define LCD_ONDAVX747 29 /* as used by the Onda VX747 */
#define LCD_ONDAVX767 30 /* as used by the Onda VX767 */
#define LCD_SSD1303 31 /* as used by the Sansa Clip */
#define LCD_FUZE 32 /* as used by the Sansa Fuze */
#define LCD_LYRE_PROTO1 33 /* as used by the Lyre prototype 1 */
#define LCD_YH925 34 /* as used by Samsung YH-925 (similar to the H10 20GB) */
#define LCD_VIEW 35 /* as used by the Sansa View */
#define LCD_NANO2G 36 /* as used by the iPod Nano 2nd Generation */
#define LCD_MINI2440 37 /* as used by the Mini2440 */
#define LCD_HDD6330 38 /* as used by the Philips HDD6330 */
#define LCD_VIBE500 39 /* as used by the Packard Bell Vibe 500 */
#define LCD_IPOD6G 40 /* as used by the iPod Nano 2nd Generation */
#define LCD_FUZEPLUS 41
#define LCD_SPFD5420A 42 /* rk27xx */
#define LCD_CLIPZIP 43 /* as used by the Sandisk Sansa Clip Zip */
#define LCD_HX8340B 44 /* as used by the HiFiMAN HM-601/HM-602/HM-801 */
#define LCD_CONNECT 45 /* as used by the Sandisk Sansa Connect */
#define LCD_GIGABEATS 46
#define LCD_YPR0 47
#define LCD_CREATIVEZXFI2 48 /* as used by the Creative Zen X-Fi2 */
#define LCD_CREATIVEZXFI3 49 /* as used by the Creative Zen X-Fi3 */
#define LCD_ILI9342 50 /* as used by HiFi E.T MA9/MA8 */
#define LCD_NWZE370 51 /* as used by Sony NWZ-E370 series */
#define LCD_NWZE360 52 /* as used by Sony NWZ-E360 series */
#define LCD_CREATIVEZEN 55 /* as used by the Creative ZEN (X-Fi) (LMS250GF03-001(S6D0139)) */
#define LCD_CREATIVEZENMOZAIC 56 /* as used by the Creative ZEN Mozaic (FGD0801) */
#define LCD_ILI9342C 57 /* another type of lcd used by HiFi E.T MA9/MA8 */
#define LCD_CREATIVEZENV 58 /* as used by the Creative Zen V (Plus) */
#define LCD_SAMSUNGYPZ5 59 /* as used by Samsung YP-Z5 */
#define LCD_IHIFI 60 /* as used by IHIFI 760/960 */
#define LCD_CREATIVEZENXFISTYLE 61 /* as used by Creative Zen X-Fi Style */
#define LCD_SAMSUNGYPR1 62 /* as used by Samsung YP-R1 */
#define LCD_NWZ_LINUX 63 /* as used in the Linux-based NWZ series */
#define LCD_INGENIC_LINUX 64
#define LCD_XDUOOX3 65 /* as used by the xDuoo X3 */
#define LCD_IHIFI770 66 /* as used by IHIFI 770 */
#define LCD_IHIFI770C 67 /* as used by IHIFI 770C */
#define LCD_IHIFI800 68 /* as used by IHIFI 800 */
#define LCD_FIIOM3K 69 /* as used by the FiiO M3K */
#define LCD_SHANLING_Q1 70 /* as used by the Shanling Q1 */
#define LCD_EROSQ 71 /* as used by the ErosQ (native) */
/* LCD_PIXELFORMAT */
#define HORIZONTAL_PACKING 1
#define VERTICAL_PACKING 2
#define HORIZONTAL_INTERLEAVED 3
#define VERTICAL_INTERLEAVED 4
#define RGB565 565
#define RGB565SWAPPED 3553
#define RGB888 888
#define XRGB8888 8888
/* LCD_STRIDEFORMAT */
#define VERTICAL_STRIDE 1
#define HORIZONTAL_STRIDE 2
/* CONFIG_ORIENTATION */
#define SCREEN_PORTRAIT 0
#define SCREEN_LANDSCAPE 1
#define SCREEN_SQUARE 2
/* CONFIG_I2C */
#define I2C_NONE 0 /* For targets that do not use I2C - as the
Lyre prototype 1 */
#define I2C_COLDFIRE 3 /* Coldfire style */
#define I2C_PP5002 4 /* PP5002 style */
#define I2C_PP5020 5 /* PP5020 style */
#define I2C_PNX0101 6 /* PNX0101 style */
#define I2C_S3C2440 7
#define I2C_PP5024 8 /* PP5024 style */
#define I2C_IMX31L 9
#define I2C_TCC780X 11
#define I2C_DM320 12 /* DM320 style */
#define I2C_S5L8700 13
#define I2C_JZ47XX 14 /* Ingenic Jz47XX style */
#define I2C_AS3525 15
#define I2C_S5L8702 16 /* Same as S5L8700, but with two channels */
#define I2C_IMX233 17
#define I2C_RK27XX 18
#define I2C_X1000 19
/* CONFIG_LED */
#define LED_REAL 1 /* SW controlled LED (Archos recorders, player) */
#define LED_VIRTUAL 2 /* Virtual LED (icon) (Archos Ondio) */
/* else HW controlled LED (iRiver H1x0) */
/* CONFIG_NAND */
#define NAND_TCC 2
#define NAND_SAMSUNG 3
#define NAND_CC 4 /* ChinaChip */
#define NAND_RK27XX 5
#define NAND_IMX233 6
/* CONFIG_RTC */
#define RTC_PCF50605 2 /* iPod 3G, 4G & Mini */
#define RTC_PCF50606 3 /* iriver H300 */
#define RTC_S3C2440 4
#define RTC_E8564 5 /* iriver H10 */
#define RTC_AS3514 6 /* Sandisk Sansa series */
#define RTC_DS1339_DS3231 7 /* h1x0 RTC mod */
#define RTC_IMX31L 8
#define RTC_RX5X348AB 9
#define RTC_TCC780X 11
#define RTC_MR100 12
#define RTC_MC13783 13 /* Freescale MC13783 PMIC */
#define RTC_S5L8700 14
#define RTC_S35390A 15
#define RTC_JZ4740 16 /* Ingenic Jz4740 */
#define RTC_NANO2G 17 /* This seems to be a PCF5063x */
#define RTC_D2 18 /* Either PCF50606 or PCF50635 */
#define RTC_S35380A 19
#define RTC_IMX233 20
#define RTC_STM41T62 21 /* ST M41T62 */
#define RTC_JZ4760 22 /* Ingenic Jz4760 */
#define RTC_X1000 23 /* Ingenic X1000 */
#define RTC_CONNECT 24 /* Sansa Connect AVR */
/* USB On-the-go */
#define USBOTG_M66591 6591 /* M:Robe 500 */
#define USBOTG_ISP1362 1362 /* iriver H300 */
#define USBOTG_ISP1583 1583 /* Creative Zen Vision:M */
#define USBOTG_M5636 5636 /* iAudio X5 */
#define USBOTG_ARC 5020 /* PortalPlayer 502x and IMX233 */
#define USBOTG_JZ4740 4740 /* Ingenic Jz4740/Jz4732 */
#define USBOTG_JZ4760 4760 /* Ingenic Jz4760/Jz4760B */
#define USBOTG_AS3525 3525 /* AMS AS3525 */
#define USBOTG_S3C6400X 6400 /* Samsung S3C6400X, also used in the S5L8701/S5L8702/S5L8720 */
#define USBOTG_DESIGNWARE 6401 /* Synopsys DesignWare OTG, used in S5L8701/S5L8702/S5L8720/AS3252v2 */
#define USBOTG_RK27XX 2700 /* Rockchip rk27xx */
#define USBOTG_TNETV105 105 /* TI TNETV105 */
/* Multiple cores */
#define CPU 0
#define COP 1
/* imx233 specific: IMX233_PACKAGE */
#define IMX233_BGA100 0
#define IMX233_BGA169 1
#define IMX233_TQFP100 2
#define IMX233_TQFP128 3
#define IMX233_LQFP100 4
/* IMX233_PARTITIONS */
#define IMX233_FREESCALE (1 << 0) /* Freescale I.MX233 nonstandard two-level MBR */
#define IMX233_CREATIVE (1 << 1) /* Creative MBLK windowing */
/* now go and pick yours */
#if defined(IRIVER_H100)
#include "config/iriverh100.h"
#elif defined(IRIVER_H120)
#include "config/iriverh120.h"
#elif defined(IRIVER_H300)
#include "config/iriverh300.h"
#elif defined(IAUDIO_X5)
#include "config/iaudiox5.h"
#elif defined(IAUDIO_M5)
#include "config/iaudiom5.h"
#elif defined(IAUDIO_M3)
#include "config/iaudiom3.h"
#elif defined(IPOD_COLOR)
#include "config/ipodcolor.h"
#elif defined(IPOD_NANO)
#include "config/ipodnano1g.h"
#elif defined(IPOD_VIDEO)
#include "config/ipodvideo.h"
#elif defined(IPOD_1G2G)
#include "config/ipod1g2g.h"
#elif defined(IPOD_3G)
#include "config/ipod3g.h"
#elif defined(IPOD_4G)
#include "config/ipod4g.h"
#elif defined(IPOD_NANO2G)
#include "config/ipodnano2g.h"
#elif defined(IPOD_6G)
#include "config/ipod6g.h"
#elif defined(GIGABEAT_F)
#include "config/gigabeatfx.h"
#elif defined(GIGABEAT_S)
#include "config/gigabeats.h"
#elif defined(IPOD_MINI)
#include "config/ipodmini1g.h"
#elif defined(IPOD_MINI2G)
#include "config/ipodmini2g.h"
#elif defined(IRIVER_H10)
#include "config/iriverh10.h"
#elif defined(IRIVER_H10_5GB)
#include "config/iriverh10_5gb.h"
#elif defined(SANSA_E200)
#include "config/sansae200.h"
#elif defined(SANSA_C200)
#include "config/sansac200.h"
#elif defined(TATUNG_TPJ1022)
#include "config/tatungtpj1022.h"
#elif defined(MROBE_100)
#include "config/mrobe100.h"
#elif defined(MROBE_500)
#include "config/mrobe500.h"
#elif defined(COWON_D2)
#include "config/cowond2.h"
#elif defined(CREATIVE_ZVM)
#include "config/zenvisionm30gb.h"
#elif defined(CREATIVE_ZVM60GB)
#include "config/zenvisionm60gb.h"
#elif defined(CREATIVE_ZV)
#include "config/zenvision.h"
#elif defined(CREATIVE_ZENXFI2)
#include "config/creativezenxfi2.h"
#elif defined(CREATIVE_ZENXFI3)
#include "config/creativezenxfi3.h"
#elif defined(PHILIPS_SA9200)
#include "config/gogearsa9200.h"
#elif defined(PHILIPS_HDD1630)
#include "config/gogearhdd1630.h"
#elif defined(PHILIPS_HDD6330)
#include "config/gogearhdd6330.h"
#elif defined(MEIZU_M6SL)
#include "config/meizum6sl.h"
#elif defined(MEIZU_M6SP)
#include "config/meizum6sp.h"
#elif defined(MEIZU_M3)
#include "config/meizum3.h"
#elif defined(ONDA_VX747) || defined(ONDA_VX747P)
#include "config/ondavx747.h"
#elif defined(ONDA_VX777)
#include "config/ondavx777.h"
#elif defined(ONDA_VX767)
#include "config/ondavx767.h"
#elif defined(SANSA_CLIP)
#include "config/sansaclip.h"
#elif defined(SANSA_CLIPV2)
#include "config/sansaclipv2.h"
#elif defined(SANSA_CLIPPLUS)
#include "config/sansaclipplus.h"
#elif defined(SANSA_E200V2)
#include "config/sansae200v2.h"
#elif defined(SANSA_M200V4)
#include "config/sansam200v4.h"
#elif defined(SANSA_FUZE)
#include "config/sansafuze.h"
#elif defined(SANSA_FUZEV2)
#include "config/sansafuzev2.h"
#elif defined(SANSA_FUZEPLUS)
#include "config/sansafuzeplus.h"
#elif defined(SANSA_CLIPZIP)
#include "config/sansaclipzip.h"
#elif defined(SANSA_C200V2)
#include "config/sansac200v2.h"
#elif defined(SANSA_VIEW)
#include "config/sansaview.h"
#elif defined(LYRE_PROTO1)
#include "config/lyreproto1.h"
#elif defined(MINI2440)
#include "config/mini2440.h"
#elif defined(SAMSUNG_YH820)
#include "config/samsungyh820.h"
#elif defined(SAMSUNG_YH920)
#include "config/samsungyh920.h"
#elif defined(SAMSUNG_YH925)
#include "config/samsungyh925.h"
#elif defined(SAMSUNG_YPS3)
#include "config/samsungyps3.h"
#elif defined(PBELL_VIBE500)
#include "config/vibe500.h"
#elif defined(MPIO_HD200)
#include "config/mpiohd200.h"
#elif defined(MPIO_HD300)
#include "config/mpiohd300.h"
#elif defined(RK27_GENERIC)
#include "config/rk27generic.h"
#elif defined(HM60X)
#include "config/hifimanhm60x.h"
#elif defined(HM801)
#include "config/hifimanhm801.h"
#elif defined(SANSA_CONNECT)
#include "config/sansaconnect.h"
#elif defined(SDLAPP)
#include "config/sdlapp.h"
#elif defined(ANDROID)
#include "config/android.h"
#elif defined(NOKIAN8XX)
#include "config/nokian8xx.h"
#elif defined(NOKIAN900)
#include "config/nokian900.h"
#elif defined(PANDORA)
#include "config/pandora.h"
#elif defined(SAMSUNG_YPR0)
#include "config/samsungypr0.h"
#elif defined(CREATIVE_ZENXFI)
#include "config/creativezenxfi.h"
#elif defined(CREATIVE_ZENMOZAIC)
#include "config/creativezenmozaic.h"
#elif defined(CREATIVE_ZEN)
#include "config/creativezen.h"
#elif defined(CREATIVE_ZENV)
#include "config/creativezenv.h"
#elif defined(MA9)
#include "config/hifietma9.h"
#elif defined(MA9C)
#include "config/hifietma9c.h"
#elif defined(MA8)
#include "config/hifietma8.h"
#elif defined(MA8C)
#include "config/hifietma8c.h"
#elif defined(SONY_NWZE370)
#include "config/sonynwze370.h"
#elif defined(SONY_NWZE360)
#include "config/sonynwze360.h"
#elif defined(SAMSUNG_YPZ5)
#include "config/samsungypz5.h"
#elif defined(IHIFI760)
#include "config/ihifi760.h"
#elif defined(IHIFI770)
#include "config/ihifi770.h"
#elif defined(IHIFI770C)
#include "config/ihifi770c.h"
#elif defined(IHIFI800)
#include "config/ihifi800.h"
#elif defined(IHIFI960)
#include "config/ihifi960.h"
#elif defined(CREATIVE_ZENXFISTYLE)
#include "config/creativezenxfistyle.h"
#elif defined(SAMSUNG_YPR1)
#include "config/samsungypr1.h"
#elif defined(DX50)
#include "config/ibassodx50.h"
#elif defined(DX90)
#include "config/ibassodx90.h"
#elif defined(SONY_NWZE460)
#include "config/sonynwze460.h"
#elif defined(SONY_NWZE450)
#include "config/sonynwze450.h"
#elif defined(SONY_NWZE580)
#include "config/sonynwze580.h"
#elif defined(SONY_NWZA10)
#include "config/sonynwza10.h"
#elif defined(SONY_NWA20)
#include "config/sonynwa20.h"
#elif defined(SONY_NWZE470)
#include "config/sonynwze470.h"
#elif defined(SONY_NWZA860)
#include "config/sonynwza860.h"
#elif defined(SONY_NWZS750)
#include "config/sonynwzs750.h"
#elif defined(SONY_NWZE350)
#include "config/sonynwze350.h"
#elif defined(AGPTEK_ROCKER)
#include "config/agptekrocker.h"
#elif defined(XDUOO_X3)
#include "config/xduoox3.h"
#elif defined(XDUOO_X3II)
#include "config/xduoox3ii.h"
#elif defined(XDUOO_X20)
#include "config/xduoox20.h"
#elif defined(FIIO_M3K_LINUX)
#include "config/fiiom3klinux.h"
#elif defined(FIIO_M3K)
#include "config/fiiom3k.h"
#elif defined(EROS_Q)
#include "config/aigoerosq.h"
#elif defined(SHANLING_Q1)
#include "config/shanlingq1.h"
#elif defined(EROS_QN)
#include "config/erosqnative.h"
#else
//#error "unknown hwardware platform!"
#endif
#ifdef __PCTOOL__
#undef CONFIG_CPU
#define CONFIG_CPU 0
#undef HAVE_MULTIVOLUME
#undef HAVE_MULTIDRIVE
#undef CONFIG_STORAGE_MULTI
#undef CONFIG_STORAGE
#endif
#ifdef APPLICATION
#define CONFIG_CPU 0
#endif
/* keep this include after the target configs */
#ifdef SIMULATOR
#include "config/sim.h"
#endif
#ifndef CONFIG_PLATFORM
#define CONFIG_PLATFORM PLATFORM_NATIVE
#endif
/* setup basic macros from capability masks */
#include "config_caps.h"
/* setup CPU-specific defines */
#ifndef __PCTOOL__
/* define for all cpus from coldfire family */
#if (ARCH == ARCH_M68K) && ((CONFIG_CPU == MCF5249) || (CONFIG_CPU == MCF5250))
#define CPU_COLDFIRE
#endif
/* define for all cpus from PP family */
#if (CONFIG_CPU == PP5002)
#define CPU_PP
#elif (CONFIG_CPU == PP5020) || (CONFIG_CPU == PP5022) \
|| (CONFIG_CPU == PP5024) || (CONFIG_CPU == PP6100)
#define CPU_PP
#define CPU_PP502x
#endif
/* define for all cpus from S5L870X family */
#if (CONFIG_CPU == S5L8700) || (CONFIG_CPU == S5L8701) || (CONFIG_CPU == S5L8702)
#define CPU_S5L870X
#endif
/* define for all cpus from TCC780 family */
#if (CONFIG_CPU == TCC7801)
#define CPU_TCC780X
#endif
/* define for all cpus from ARM7TDMI family (for specific optimisations) */
#if defined(CPU_PP) || (CONFIG_CPU == PNX0101) || (CONFIG_CPU == DSC25)
#define CPU_ARM7TDMI
#endif
/* define for all cpus from ARM family */
#if ARCH == ARCH_ARM
#define CPU_ARM
#define ARM_ARCH ARCH_VERSION /* ARMv{4,5,6,7} */
#endif
#if ARCH == ARCH_MIPS
#define CPU_MIPS ARCH_VERSION /* 32, 64 */
#endif
#endif /*__PCTOOL__*/
/* now set any CONFIG_ defines correctly if they are not used,
No need to do this on CONFIG_'s which are compulsory (e.g CONFIG_CODEC ) */
#if !defined(CONFIG_BACKLIGHT_FADING)
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_NO_FADING
#endif
#ifndef CONFIG_I2C
#define CONFIG_I2C I2C_NONE
#endif
#ifndef CONFIG_TUNER
#define CONFIG_TUNER 0
#endif
#ifndef CONFIG_USBOTG
#define CONFIG_USBOTG 0
#endif
#ifndef CONFIG_LED
#define CONFIG_LED LED_VIRTUAL
#endif
#ifndef CONFIG_CHARGING
#define CONFIG_CHARGING 0
#endif
#ifndef CONFIG_BATTERY_MEASURE
#define CONFIG_BATTERY_MEASURE 0
#define NO_LOW_BATTERY_SHUTDOWN
#endif
#ifndef CONFIG_RTC
#define CONFIG_RTC 0
#endif
#ifndef BATTERY_TYPES_COUNT
#define BATTERY_TYPES_COUNT 0
#endif
#ifndef BATTERY_CAPACITY_DEFAULT
#define BATTERY_CAPACITY_DEFAULT 0
#endif
#ifndef BATTERY_CAPACITY_INC
#define BATTERY_CAPACITY_INC 0
#endif
#ifdef HAVE_RDS_CAP
/* combinable bitflags */
#define RDS_CFG_ISR 0x1 /* uses ISR to process packets */
#define RDS_CFG_PROCESS 0x2 /* uses raw packet processing */
#define RDS_CFG_PUSH 0x4 /* pushes processed information */
#ifndef CONFIG_RDS
#define CONFIG_RDS RDS_CFG_PROCESS /* thread processing+raw processing */
#endif /* CONFIG_RDS */
#endif /* HAVE_RDS_CAP */
#if (CONFIG_PLATFORM & PLATFORM_NATIVE)
#if CONFIG_RTC == RTC_AS3514
#if CONFIG_CPU == AS3525 || CONFIG_CPU == AS3525v2
#define HAVE_RTC_IRQ
#endif
#elif CONFIG_RTC == RTC_MC13783
#define HAVE_RTC_IRQ
#endif
#endif /* (CONFIG_PLATFORM & PLATFORM_NATIVE) */
#ifndef CONFIG_ORIENTATION
#if LCD_HEIGHT > LCD_WIDTH
#define CONFIG_ORIENTATION SCREEN_PORTRAIT
#elif LCD_HEIGHT < LCD_WIDTH
#define CONFIG_ORIENTATION SCREEN_LANDSCAPE
#else
#define CONFIG_ORIENTATION SCREEN_SQUARE
#endif
#endif
/* Pixel aspect ratio is defined in terms of a multiplier for pixel width and
* height, and is set to 1:1 if the target does not set a value
*/
#ifndef LCD_PIXEL_ASPECT_HEIGHT
#define LCD_PIXEL_ASPECT_HEIGHT 1
#endif
#ifndef LCD_PIXEL_ASPECT_WIDTH
#define LCD_PIXEL_ASPECT_WIDTH 1
#endif
/* Used for split displays (Sansa Clip). Set to 0 otherwise */
#ifndef LCD_SPLIT_LINES
#define LCD_SPLIT_LINES 0
#endif
/* Simulator LCD dimensions. Set to standard dimensions if undefined */
#ifndef SIM_LCD_WIDTH
#define SIM_LCD_WIDTH LCD_WIDTH
#endif
#ifndef SIM_LCD_HEIGHT
#define SIM_LCD_HEIGHT (LCD_HEIGHT + LCD_SPLIT_LINES)
#endif
#ifdef HAVE_REMOTE_LCD
#ifndef SIM_REMOTE_WIDTH
#define SIM_REMOTE_WIDTH LCD_REMOTE_WIDTH
#endif
#ifndef SIM_REMOTE_HEIGHT
#define SIM_REMOTE_HEIGHT LCD_REMOTE_HEIGHT
#endif
#endif /* HAVE_REMOTE_LCD */
/* define this in the target config.h to use a different size */
#ifndef CONFIG_DEFAULT_ICON_HEIGHT
#define CONFIG_DEFAULT_ICON_HEIGHT 8
#endif
#ifndef CONFIG_DEFAULT_ICON_WIDTH
#define CONFIG_DEFAULT_ICON_WIDTH 6
#endif
#ifndef CONFIG_REMOTE_DEFAULT_ICON_HEIGHT
#define CONFIG_REMOTE_DEFAULT_ICON_HEIGHT 8
#endif
#ifndef CONFIG_REMOTE_DEFAULT_ICON_WIDTH
#define CONFIG_REMOTE_DEFAULT_ICON_WIDTH 6
#endif
#if LCD_DEPTH > 1 || defined(HAVE_REMOTE_LCD) && LCD_REMOTE_DEPTH > 1
#define HAVE_BACKDROP_IMAGE
#endif
#if (CONFIG_TUNER & (CONFIG_TUNER - 1)) != 0
/* Multiple possible tuners */
#define CONFIG_TUNER_MULTI
#endif
/* deactivate fading in bootloader */
#if defined(BOOTLOADER)
#undef CONFIG_BACKLIGHT_FADING
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_NO_FADING
#endif
/* determine which setting/manual text to use */
#if (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_PWM)
/* possibly overridden in target config */
#if !defined(HAVE_BACKLIGHT_FADING_BOOL_SETTING) \
&& !defined(HAVE_BACKLIGHT_FADING_INT_SETTING)
#define HAVE_BACKLIGHT_FADING_INT_SETTING
#endif
#elif (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_SETTING) \
|| (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_HW_REG) \
|| (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_TARGET)
/* possibly overridden in target config */
#if !defined(HAVE_BACKLIGHT_FADING_BOOL_SETTING) \
&& !defined(HAVE_BACKLIGHT_FADING_INT_SETTING)
#define HAVE_BACKLIGHT_FADING_BOOL_SETTING
#endif
#endif /* CONFIG_BACKLIGHT_FADING */
/* Storage related config handling */
#if (CONFIG_STORAGE & (CONFIG_STORAGE - 1)) != 0
/* Multiple storage drivers */
#define CONFIG_STORAGE_MULTI
#endif
/* Explicit HAVE_MULTIVOLUME in the config file. Allow the maximum number */
#ifdef HAVE_MULTIVOLUME
#define NUM_VOLUMES_PER_DRIVE 4
#else
#define NUM_VOLUMES_PER_DRIVE 1
#endif
#if defined(CONFIG_STORAGE_MULTI) && !defined(HAVE_MULTIDRIVE)
#define HAVE_MULTIDRIVE
#endif
#if defined(HAVE_MULTIDRIVE) && !defined(HAVE_MULTIVOLUME)
#define HAVE_MULTIVOLUME
#endif
#if defined(HAVE_MULTIDRIVE) && !defined(NUM_DRIVES)
#error HAVE_MULTIDRIVE needs to have an explicit NUM_DRIVES
#endif
/* note to remove multi-partition booting this could be changed to MULTIDRIVE */
#if defined(HAVE_BOOTDATA) && defined(BOOT_REDIR) && defined(HAVE_MULTIVOLUME)
#define HAVE_MULTIBOOT
#endif
#ifndef NUM_DRIVES
#define NUM_DRIVES 1
#endif
#define NUM_VOLUMES (NUM_DRIVES * NUM_VOLUMES_PER_DRIVE)
#if defined(BOOTLOADER) && defined(HAVE_ADJUSTABLE_CPU_FREQ)
/* Bootloaders don't use CPU frequency adjustment */
#undef HAVE_ADJUSTABLE_CPU_FREQ
#endif
#if defined(__PCTOOL__) && defined(HAVE_ADJUSTABLE_CPU_FREQ)
/* PCTOOLs don't use CPU frequency adjustment */
#undef HAVE_ADJUSTABLE_CPU_FREQ
#endif
/* Enable the directory cache and tagcache in RAM if we have
* plenty of RAM. Both features can be enabled independently. */
#if (MEMORYSIZE >= 8) && !defined(BOOTLOADER) && !defined(__PCTOOL__) \
&& !defined(APPLICATION)
#ifndef SIMULATOR
#define HAVE_DIRCACHE
#endif
#ifdef HAVE_TAGCACHE
#define HAVE_TC_RAMCACHE
#endif
#endif
#if defined(HAVE_TAGCACHE)
#define HAVE_PICTUREFLOW_INTEGRATION
#endif
#ifdef BOOTLOADER
#ifdef HAVE_BOOTLOADER_USB_MODE
/* Priority in bootloader is wanted */
#define HAVE_PRIORITY_SCHEDULING
#if (CONFIG_CPU == S5L8702)
#define USB_DRIVER_CLOSE
#else
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#endif
#if defined(HAVE_USBSTACK) && CONFIG_USBOTG == USBOTG_ARC
#define INCLUDE_TIMEOUT_API
#define USB_DRIVER_CLOSE
#endif
#if defined(HAVE_USBSTACK) && CONFIG_USBOTG == USBOTG_TNETV105
#define INCLUDE_TIMEOUT_API
#define USB_DRIVER_CLOSE
#endif
#endif
#else /* !BOOTLOADER */
#define HAVE_EXTENDED_MESSAGING_AND_NAME
#define HAVE_WAKEUP_EXT_CB
#if defined(ASSEMBLER_THREADS) \
|| defined(HAVE_WIN32_FIBER_THREADS) \
|| defined(HAVE_SIGALTSTACK_THREADS)
#define HAVE_PRIORITY_SCHEDULING
#endif
#if (CONFIG_PLATFORM & PLATFORM_NATIVE)
#define HAVE_PRIORITY_SCHEDULING
#define HAVE_SCHEDULER_BOOSTCTRL
#endif /* PLATFORM_NATIVE */
#ifdef HAVE_USBSTACK
#if CONFIG_USBOTG == USBOTG_ARC
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#define INCLUDE_TIMEOUT_API
#elif CONFIG_USBOTG == USBOTG_AS3525
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#elif CONFIG_USBOTG == USBOTG_S3C6400X /* FIXME */ && CONFIG_CPU != S5L8701
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#elif CONFIG_USBOTG == USBOTG_DESIGNWARE /* FIXME */ && CONFIG_CPU != S5L8701
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#elif CONFIG_USBOTG == USBOTG_RK27XX
#define USB_DETECT_BY_REQUEST
#elif CONFIG_USBOTG == USBOTG_TNETV105
#define USB_STATUS_BY_EVENT
#define USB_DETECT_BY_REQUEST
#endif /* CONFIG_USB == */
#endif /* HAVE_USBSTACK */
#endif /* BOOTLOADER */
#if defined(HAVE_USBSTACK) || (CONFIG_CPU == JZ4732) || (CONFIG_CPU == JZ4760B) \
|| (CONFIG_CPU == AS3525) || (CONFIG_CPU == AS3525v2) \
|| defined(CPU_S5L870X) || (CONFIG_CPU == S3C2440) \
|| defined(APPLICATION) || (CONFIG_CPU == PP5002) \
|| (CONFIG_CPU == RK27XX) || (CONFIG_CPU == IMX233) || \
(defined(HAVE_LCD_COLOR) && \
(!defined(LCD_STRIDEFORMAT) || (LCD_STRIDEFORMAT != VERTICAL_STRIDE)))
#define HAVE_SEMAPHORE_OBJECTS
#endif
/*include support for crossfading - requires significant PCM buffer space*/
#if MEMORYSIZE > 2
#define HAVE_CROSSFADE
#endif
/* Determine if accesses should be strictly long aligned. */
#if defined(CPU_ARM) || defined(CPU_MIPS)
#define ROCKBOX_STRICT_ALIGN 1
#endif
#if defined(CPU_ARM) && defined(__ASSEMBLER__)
/* ARMv4T doesn't switch the T bit when popping pc directly, we must use BX */
.macro ldmpc cond="", order="ia", regs
#if ARM_ARCH == 4 && defined(USE_THUMB)
ldm\cond\order sp!, { \regs, lr }
bx\cond lr
#else
ldm\cond\order sp!, { \regs, pc }
#endif
.endm
.macro ldrpc cond=""
#if ARM_ARCH == 4 && defined(USE_THUMB)
ldr\cond lr, [sp], #4
bx\cond lr
#else
ldr\cond pc, [sp], #4
#endif
.endm
#endif
#if defined(CPU_COLDFIRE) && defined(__ASSEMBLER__)
/* Assembler doesn't support these as mnemonics but does tpf */
.macro tpf.w
.word 0x51fa
.endm
.macro tpf.l
.word 0x51fb
.endm
#endif
#ifndef CODEC_SIZE
#define CODEC_SIZE 0
#endif
/* This attribute can be used to ensure that certain symbols are never profiled
* which can be important as profiling a function de-inlines it */
#ifdef RB_PROFILE
#define NO_PROF_ATTR __attribute__ ((no_instrument_function))
#else
#define NO_PROF_ATTR
#endif
/* IRAM usage */
#if (CONFIG_PLATFORM & PLATFORM_NATIVE) && /* Not for hosted environments */ \
(defined(CPU_COLDFIRE) || /* Coldfire: core, plugins, codecs */ \
defined(CPU_PP) || /* PortalPlayer: core, plugins, codecs */ \
(CONFIG_CPU == AS3525 && MEMORYSIZE > 2 && !defined(BOOTLOADER)) || /* AS3525 +2MB: core, plugins, codecs */ \
(CONFIG_CPU == AS3525 && MEMORYSIZE <= 2 && !defined(PLUGIN) && !defined(CODEC) && !defined(BOOTLOADER)) || /* AS3525 2MB: core only */ \
(CONFIG_CPU == AS3525v2 && !defined(PLUGIN) && !defined(CODEC) && !defined(BOOTLOADER)) || /* AS3525v2: core only */ \
(CONFIG_CPU == PNX0101) || \
(CONFIG_CPU == TCC7801) || \
(CONFIG_CPU == IMX233 && !defined(PLUGIN) && !defined(CODEC)) || /* IMX233: core only */ \
defined(CPU_S5L870X)) || /* Samsung S5L8700: core, plugins, codecs */ \
((CONFIG_CPU == JZ4732 || CONFIG_CPU == JZ4760B) && !defined(PLUGIN) && !defined(CODEC)) /* Jz47XX: core only */
#define ICODE_ATTR __attribute__ ((section(".icode")))
#define ICONST_ATTR __attribute__ ((section(".irodata")))
#define IDATA_ATTR __attribute__ ((section(".idata")))
#define IBSS_ATTR __attribute__ ((section(".ibss")))
#define USE_IRAM
#if (CONFIG_CPU != AS3525 || MEMORYSIZE > 2) \
&& CONFIG_CPU != JZ4732 && CONFIG_CPU != JZ4760B && CONFIG_CPU != AS3525v2 && CONFIG_CPU != IMX233
#define PLUGIN_USE_IRAM
#endif
#else
#define ICODE_ATTR
#define ICONST_ATTR
#define IDATA_ATTR
#define IBSS_ATTR
#endif
#if (defined(CPU_PP) || (CONFIG_CPU == AS3525) || (CONFIG_CPU == AS3525v2) || \
(CONFIG_CPU == IMX31L) || (CONFIG_CPU == IMX233) || \
(CONFIG_CPU == RK27XX) || defined(CPU_COLDFIRE)) \
&& (CONFIG_PLATFORM & PLATFORM_NATIVE) && !defined(BOOTLOADER)
/* Functions that have INIT_ATTR attached are NOT guaranteed to survive after
* root_menu() has been called. Their code may be overwritten by other data or
* code in order to save RAM, and references to them might point into
* zombie area.
*
* It is critical that you make sure these functions are only called before
* the final call to root_menu() (see apps/main.c) is called (i.e. basically
* only while main() runs), otherwise things may go wild,
* from crashes to freezes to exploding daps.
*/
#define INIT_ATTR __attribute__ ((section(".init")))
#define INITDATA_ATTR __attribute__ ((section(".initdata")))
#define HAVE_INIT_ATTR
#else
#define INIT_ATTR
#define INITDATA_ATTR
#endif
/* We need to call storage_init more than once only if USB storage mode is
* handled in hardware:
* Deinit storage -> let hardware handle USB mode -> storage_init() again
*/
#if defined(HAVE_USBSTACK) || defined(USB_NONE)
#define STORAGE_INIT_ATTR INIT_ATTR
#else
#define STORAGE_INIT_ATTR
#endif
#if (CONFIG_PLATFORM & PLATFORM_HOSTED) && defined(__APPLE__)
#define DATA_ATTR __attribute__ ((section("__DATA, .data")))
#else
#define DATA_ATTR __attribute__ ((section(".data")))
#endif
#ifndef IRAM_LCDFRAMEBUFFER
/* if the LCD framebuffer has not been moved to IRAM, define it empty here */
#define IRAM_LCDFRAMEBUFFER
#endif
/* Change this if you want to build a single-core firmware for a multicore
* target for debugging */
#if defined(BOOTLOADER) || (CONFIG_CPU == PP6100)
#define FORCE_SINGLE_CORE
#endif
#if defined(CPU_PP)
#define IDLE_STACK_SIZE 0x80
#define IDLE_STACK_WORDS 0x20
/* Attributes to place data in uncached DRAM */
/* These are useful beyond dual-core and ultimately beyond PP since they may
* be used for DMA buffers and such without cache maintenence calls. */
#define NOCACHEBSS_ATTR __attribute__((section(".ncbss"),nocommon))
#define NOCACHEDATA_ATTR __attribute__((section(".ncdata"),nocommon))
#if !defined(FORCE_SINGLE_CORE)
#define NUM_CORES 2
#define HAVE_CORELOCK_OBJECT
#define CURRENT_CORE current_core()
/* Attributes for core-shared data in DRAM where IRAM is better used for other
* purposes. */
#define SHAREDBSS_ATTR NOCACHEBSS_ATTR
#define SHAREDDATA_ATTR NOCACHEDATA_ATTR
#define IF_COP(...) __VA_ARGS__
#define IF_COP_VOID(...) __VA_ARGS__
#define IF_COP_CORE(core) core
#endif /* !defined(FORCE_SINGLE_CORE) */
#endif /* CPU_PP */
#if CONFIG_CPU == IMX31L || CONFIG_CPU == IMX233
#define NOCACHEBSS_ATTR __attribute__((section(".ncbss"),nocommon))
#define NOCACHEDATA_ATTR __attribute__((section(".ncdata"),nocommon))
#endif
#ifndef NUM_CORES
/* Default to single core */
#define NUM_CORES 1
#define CURRENT_CORE CPU
/* Attributes for core-shared data in DRAM - no caching considerations */
#define SHAREDBSS_ATTR
#define SHAREDDATA_ATTR
#ifndef NOCACHEBSS_ATTR
#define NOCACHEBSS_ATTR
#define NOCACHEDATA_ATTR
#endif
#define IF_COP(...)
#define IF_COP_VOID(...) void
#define IF_COP_CORE(core) CURRENT_CORE
#endif /* NUM_CORES */
#ifdef HAVE_HEADPHONE_DETECTION
/* Timeout objects required if headphone detection is enabled */
#define INCLUDE_TIMEOUT_API
#endif /* HAVE_HEADPHONE_DETECTION */
#ifdef HAVE_TOUCHSCREEN
/* Timeout objects required for kinetic list scrolling */
#define INCLUDE_TIMEOUT_API
/* Enable skin variable system, may not be the best place for this #define. */
#define HAVE_SKIN_VARIABLES
#endif /* HAVE_TOUCHSCREEN */
#if defined(HAVE_USB_CHARGING_ENABLE) && defined(HAVE_USBSTACK)
/* USB charging support in the USB stack requires timeout objects */
#define INCLUDE_TIMEOUT_API
#endif /* HAVE_USB_CHARGING_ENABLE && HAVE_USBSTACK */
#ifndef SIMULATOR
#if defined(HAVE_USBSTACK) || (CONFIG_STORAGE & STORAGE_NAND) || (CONFIG_STORAGE & STORAGE_RAMDISK)
#define STORAGE_GET_INFO
#endif
#endif
#ifdef CPU_MIPS
#include <stdbool.h> /* MIPS GCC fix? */
#endif
#if defined(HAVE_USBSTACK)
/* Define the implemented USB transport classes */
#if CONFIG_USBOTG == USBOTG_ISP1583
#define USB_HAS_BULK
#elif (CONFIG_USBOTG == USBOTG_ARC) || \
(CONFIG_USBOTG == USBOTG_JZ4740) || \
(CONFIG_USBOTG == USBOTG_JZ4760) || \
(CONFIG_USBOTG == USBOTG_M66591) || \
(CONFIG_USBOTG == USBOTG_DESIGNWARE) || \
(CONFIG_USBOTG == USBOTG_AS3525) || \
(CONFIG_USBOTG == USBOTG_RK27XX) || \
(CONFIG_USBOTG == USBOTG_TNETV105)
#define USB_HAS_BULK
#define USB_HAS_INTERRUPT
#elif defined(CPU_TCC780X)
#define USB_HAS_BULK
#elif CONFIG_USBOTG == USBOTG_S3C6400X
#define USB_HAS_BULK
//#define USB_HAS_INTERRUPT -- seems to be broken
#endif /* CONFIG_USBOTG */
#if (CONFIG_USBOTG == USBOTG_ARC) || \
(CONFIG_USBOTG == USBOTG_AS3525)
#define USB_HAS_ISOCHRONOUS
#endif
/* define the class drivers to enable */
#ifdef BOOTLOADER
/* enable usb storage for targets that do bootloader usb */
#if defined(HAVE_BOOTLOADER_USB_MODE) || \
defined(CREATIVE_ZVx) || defined(CPU_TCC780X) || \
CONFIG_USBOTG == USBOTG_JZ4740 || CONFIG_USBOTG == USBOTG_AS3525 || \
CONFIG_USBOTG == USBOTG_S3C6400X || CONFIG_USBOTG == USBOTG_DESIGNWARE || \
CONFIG_USBOTG == USBOTG_JZ4760
#define USB_ENABLE_STORAGE
#endif
#else /* BOOTLOADER */
#if (CONFIG_PLATFORM & PLATFORM_NATIVE)
#ifdef USB_HAS_BULK
//#define USB_ENABLE_SERIAL
#define USB_ENABLE_STORAGE
#endif /* USB_HAS_BULK */
#ifdef USB_HAS_INTERRUPT
#define USB_ENABLE_HID
#else
#define USB_ENABLE_CHARGING_ONLY
#endif
#endif
#endif /* BOOTLOADER */
#endif /* HAVE_USBSTACK */
/* This attribute can be used to enable to detection of plugin file handles leaks.
* When enabled, the plugin core will monitor open/close/creat and when the plugin exits
* will display an error message if the plugin leaked some file handles */
#if (CONFIG_PLATFORM & PLATFORM_NATIVE) || defined (SIMULATOR)
#define HAVE_PLUGIN_CHECK_OPEN_CLOSE
#endif
#if defined(CPU_COLDIRE) || CONFIG_CPU == IMX31L
/* Can record and play simultaneously */
#define HAVE_PCM_FULL_DUPLEX
#endif
#define HAVE_PITCHCONTROL
/* enable logging messages to disk*/
#if !defined(BOOTLOADER) && !defined(__PCTOOL__)
#define ROCKBOX_HAS_LOGDISKF
#endif
#if defined(HAVE_SDL_AUDIO) \
&& !(CONFIG_PLATFORM & PLATFORM_MAEMO5) \
&& !defined(HAVE_SW_VOLUME_CONTROL)
/* SW volume is needed for accurate control and no double buffering should be
* required. If target uses SW volume, then its definitions are used instead
* so things are as on target. */
#define HAVE_SW_VOLUME_CONTROL
#define PCM_SW_VOLUME_UNBUFFERED /* pcm driver itself is buffered */
#ifdef SIMULATOR
/* For sim, nice res for ~ -127dB..+36dB that so far covers all targets */
#define PCM_SW_VOLUME_FRACBITS (24)
#else
/* For app, use fractional-only setup for -79..+0, no large-integer math */
#define PCM_SW_VOLUME_FRACBITS (16)
#endif /* SIMULATOR */
#endif /* default SDL SW volume conditions */
/* null audiohw setting macro for when codec header is included for reasons
other than audio support */
#define AUDIOHW_SETTING(name, us, nd, st, minv, maxv, defv, expr...)
#endif /* __CONFIG_H__ */
Reference in a new issue View git blame Copy permalink