Karl Kurbjun a6223468eb Keep the clocks enabled once the LCD DMA transfer completes. It kills the PCM driver if they are disabled. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29238 a1c6a512-1295-4272-9138-f99709370657		2011-02-06 21:09:03 +00:00
..
adc-mr500.c	M:Robe 500 ADC: Remove pin initializations.	2011-02-06 20:41:49 +00:00
adc-target.h
ata-mr500.c	M:Robe 500 ATA: Remove pin initializations.	2011-02-06 20:37:22 +00:00
ata-target.h	Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.	2011-01-02 22:51:47 +00:00
backlight-mr500.c	M:Robe 500 Backlight: Add setup based on OF - purpose of operations are a mystery, but needed when loading from flash.	2011-02-06 20:44:57 +00:00
backlight-target.h
button-mr500.c
button-target.h
crt0-board.S	DM320: Update boot linker script (right now it is linked against flash). Include board initialization for M:Robe 500.	2011-02-06 20:17:15 +00:00
dm320codec-mr500.c	Remove pcm_mute() which has been unused since r19308	2010-04-27 00:05:02 +00:00
lcd-mr500.c	Keep the clocks enabled once the LCD DMA transfer completes. It kills the PCM driver if they are disabled.	2011-02-06 21:09:03 +00:00
lcd-remote-mr500.c	Various minor clean-ups for mrobe	2010-07-31 13:41:06 +00:00
lcd-remote-target.h
lcd-target.h
pcm-mr500.c	M:Robe 500 and TSC2100: Add more to the initialization. Some GPIO initializations are now removed - this will be hanled by the OF or bootloader (when loading from flash).	2011-02-06 19:33:40 +00:00
power-mr500.c	M:Robe 500 Power: Remove pin initializations.	2011-02-06 20:46:37 +00:00
powermgmt-mr500.c	M:Robe 500 Power: Update battery Curve and simplify calculations.	2010-04-25 16:11:49 +00:00
usb-mr500.c	M:Robe 500 USB: Remove EMIF and pin initialization.	2011-02-06 20:47:39 +00:00
usb-mr500.h