ca41779fc6
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20208 a1c6a512-1295-4272-9138-f99709370657
1452 lines
36 KiB
C
1452 lines
36 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Alan Korr
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include <stdbool.h>
|
|
#include "ata.h"
|
|
#include "kernel.h"
|
|
#include "thread.h"
|
|
#include "led.h"
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "debug.h"
|
|
#include "panic.h"
|
|
#include "usb.h"
|
|
#include "power.h"
|
|
#include "string.h"
|
|
#include "ata_idle_notify.h"
|
|
#include "ata-target.h"
|
|
#include "storage.h"
|
|
|
|
#define SECTOR_SIZE (512)
|
|
|
|
#define ATA_FEATURE ATA_ERROR
|
|
|
|
#define ATA_STATUS ATA_COMMAND
|
|
#define ATA_ALT_STATUS ATA_CONTROL
|
|
|
|
#define SELECT_DEVICE1 0x10
|
|
#define SELECT_LBA 0x40
|
|
|
|
#define CONTROL_nIEN 0x02
|
|
#define CONTROL_SRST 0x04
|
|
|
|
#define CMD_READ_SECTORS 0x20
|
|
#define CMD_WRITE_SECTORS 0x30
|
|
#define CMD_WRITE_SECTORS_EXT 0x34
|
|
#define CMD_READ_MULTIPLE 0xC4
|
|
#define CMD_READ_MULTIPLE_EXT 0x29
|
|
#define CMD_WRITE_MULTIPLE 0xC5
|
|
#define CMD_SET_MULTIPLE_MODE 0xC6
|
|
#define CMD_STANDBY_IMMEDIATE 0xE0
|
|
#define CMD_STANDBY 0xE2
|
|
#define CMD_IDENTIFY 0xEC
|
|
#define CMD_SLEEP 0xE6
|
|
#define CMD_SET_FEATURES 0xEF
|
|
#define CMD_SECURITY_FREEZE_LOCK 0xF5
|
|
|
|
/* Should all be < 0x100 (which are reserved for control messages) */
|
|
#define Q_SLEEP 0
|
|
#define Q_CLOSE 1
|
|
|
|
#define READ_TIMEOUT 5*HZ
|
|
|
|
#ifdef HAVE_ATA_POWER_OFF
|
|
#define ATA_POWER_OFF_TIMEOUT 2*HZ
|
|
#endif
|
|
|
|
#ifdef ATA_DRIVER_CLOSE
|
|
static unsigned int ata_thread_id = 0;
|
|
#endif
|
|
|
|
#if defined(MAX_PHYS_SECTOR_SIZE) && MEM == 64
|
|
/* Hack - what's the deal with 5g? */
|
|
struct ata_lock
|
|
{
|
|
struct thread_entry *thread;
|
|
int count;
|
|
volatile unsigned char locked;
|
|
IF_COP( struct corelock cl; )
|
|
};
|
|
|
|
static void ata_lock_init(struct ata_lock *l)
|
|
{
|
|
corelock_init(&l->cl);
|
|
l->locked = 0;
|
|
l->count = 0;
|
|
l->thread = NULL;
|
|
}
|
|
|
|
static void ata_lock_lock(struct ata_lock *l)
|
|
{
|
|
struct thread_entry * const current =
|
|
thread_id_entry(THREAD_ID_CURRENT);
|
|
|
|
if (current == l->thread)
|
|
{
|
|
l->count++;
|
|
return;
|
|
}
|
|
|
|
corelock_lock(&l->cl);
|
|
|
|
IF_PRIO( current->skip_count = -1; )
|
|
|
|
while (l->locked != 0)
|
|
{
|
|
corelock_unlock(&l->cl);
|
|
switch_thread();
|
|
corelock_lock(&l->cl);
|
|
}
|
|
|
|
l->locked = 1;
|
|
l->thread = current;
|
|
corelock_unlock(&l->cl);
|
|
}
|
|
|
|
static void ata_lock_unlock(struct ata_lock *l)
|
|
{
|
|
if (l->count > 0)
|
|
{
|
|
l->count--;
|
|
return;
|
|
}
|
|
|
|
corelock_lock(&l->cl);
|
|
|
|
IF_PRIO( l->thread->skip_count = 0; )
|
|
|
|
l->thread = NULL;
|
|
l->locked = 0;
|
|
|
|
corelock_unlock(&l->cl);
|
|
}
|
|
|
|
#define mutex ata_lock
|
|
#define mutex_init ata_lock_init
|
|
#define mutex_lock ata_lock_lock
|
|
#define mutex_unlock ata_lock_unlock
|
|
#endif /* MAX_PHYS_SECTOR_SIZE */
|
|
|
|
#if defined(HAVE_USBSTACK) && defined(USE_ROCKBOX_USB)
|
|
#define ALLOW_USB_SPINDOWN
|
|
#endif
|
|
|
|
static struct mutex ata_mtx SHAREDBSS_ATTR;
|
|
static int ata_device; /* device 0 (master) or 1 (slave) */
|
|
|
|
static int spinup_time = 0;
|
|
#if (CONFIG_LED == LED_REAL)
|
|
static bool ata_led_enabled = true;
|
|
static bool ata_led_on = false;
|
|
#endif
|
|
static bool spinup = false;
|
|
static bool sleeping = true;
|
|
static bool poweroff = false;
|
|
static long sleep_timeout = 5*HZ;
|
|
#ifdef HAVE_LBA48
|
|
static bool lba48 = false; /* set for 48 bit addressing */
|
|
#endif
|
|
static long ata_stack[(DEFAULT_STACK_SIZE*3)/sizeof(long)];
|
|
static const char ata_thread_name[] = "ata";
|
|
static struct event_queue ata_queue SHAREDBSS_ATTR;
|
|
static bool initialized = false;
|
|
|
|
static long last_user_activity = -1;
|
|
static long last_disk_activity = -1;
|
|
|
|
static unsigned long total_sectors;
|
|
static int multisectors; /* number of supported multisectors */
|
|
static unsigned short identify_info[SECTOR_SIZE/2];
|
|
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
|
|
struct sector_cache_entry {
|
|
bool inuse;
|
|
unsigned long sectornum; /* logical sector */
|
|
unsigned char data[MAX_PHYS_SECTOR_SIZE];
|
|
};
|
|
/* buffer for reading and writing large physical sectors */
|
|
#define NUMCACHES 2
|
|
static struct sector_cache_entry sector_cache;
|
|
static int phys_sector_mult = 1;
|
|
#endif
|
|
|
|
static int ata_power_on(void);
|
|
static int perform_soft_reset(void);
|
|
static int set_multiple_mode(int sectors);
|
|
static int set_features(void);
|
|
|
|
STATICIRAM ICODE_ATTR int wait_for_bsy(void)
|
|
{
|
|
long timeout = current_tick + HZ*30;
|
|
|
|
do
|
|
{
|
|
if (!(ATA_STATUS & STATUS_BSY))
|
|
return 1;
|
|
last_disk_activity = current_tick;
|
|
yield();
|
|
} while (TIME_BEFORE(current_tick, timeout));
|
|
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
STATICIRAM ICODE_ATTR int wait_for_rdy(void)
|
|
{
|
|
long timeout;
|
|
|
|
if (!wait_for_bsy())
|
|
return 0;
|
|
|
|
timeout = current_tick + HZ*10;
|
|
|
|
do
|
|
{
|
|
if (ATA_ALT_STATUS & STATUS_RDY)
|
|
return 1;
|
|
last_disk_activity = current_tick;
|
|
yield();
|
|
} while (TIME_BEFORE(current_tick, timeout));
|
|
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
STATICIRAM ICODE_ATTR int wait_for_start_of_transfer(void)
|
|
{
|
|
if (!wait_for_bsy())
|
|
return 0;
|
|
|
|
return (ATA_ALT_STATUS & (STATUS_BSY|STATUS_DRQ)) == STATUS_DRQ;
|
|
}
|
|
|
|
STATICIRAM ICODE_ATTR int wait_for_end_of_transfer(void)
|
|
{
|
|
if (!wait_for_bsy())
|
|
return 0;
|
|
return (ATA_ALT_STATUS & (STATUS_RDY|STATUS_DRQ)) == STATUS_RDY;
|
|
}
|
|
|
|
#if (CONFIG_LED == LED_REAL)
|
|
/* Conditionally block LED access for the ATA driver, so the LED can be
|
|
* (mis)used for other purposes */
|
|
static void ata_led(bool on)
|
|
{
|
|
ata_led_on = on;
|
|
if (ata_led_enabled)
|
|
led(ata_led_on);
|
|
}
|
|
#else
|
|
#define ata_led(on) led(on)
|
|
#endif
|
|
|
|
#ifndef ATA_OPTIMIZED_READING
|
|
STATICIRAM ICODE_ATTR void copy_read_sectors(unsigned char* buf, int wordcount)
|
|
{
|
|
unsigned short tmp = 0;
|
|
|
|
if ( (unsigned long)buf & 1)
|
|
{ /* not 16-bit aligned, copy byte by byte */
|
|
unsigned char* bufend = buf + wordcount*2;
|
|
do
|
|
{
|
|
tmp = ATA_DATA;
|
|
#if defined(SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
|
|
*buf++ = tmp & 0xff; /* I assume big endian */
|
|
*buf++ = tmp >> 8; /* and don't use the SWAB16 macro */
|
|
#else
|
|
*buf++ = tmp >> 8;
|
|
*buf++ = tmp & 0xff;
|
|
#endif
|
|
} while (buf < bufend); /* tail loop is faster */
|
|
}
|
|
else
|
|
{ /* 16-bit aligned, can do faster copy */
|
|
unsigned short* wbuf = (unsigned short*)buf;
|
|
unsigned short* wbufend = wbuf + wordcount;
|
|
do
|
|
{
|
|
#ifdef SWAP_WORDS
|
|
*wbuf = swap16(ATA_DATA);
|
|
#else
|
|
*wbuf = ATA_DATA;
|
|
#endif
|
|
} while (++wbuf < wbufend); /* tail loop is faster */
|
|
}
|
|
}
|
|
#endif /* !ATA_OPTIMIZED_READING */
|
|
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
static int _read_sectors(unsigned long start,
|
|
int incount,
|
|
void* inbuf)
|
|
#else
|
|
int ata_read_sectors(IF_MV2(int drive,)
|
|
unsigned long start,
|
|
int incount,
|
|
void* inbuf)
|
|
#endif
|
|
{
|
|
int ret = 0;
|
|
long timeout;
|
|
int count;
|
|
void* buf;
|
|
long spinup_start;
|
|
|
|
#ifndef MAX_PHYS_SECTOR_SIZE
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive; /* unused for now */
|
|
#endif
|
|
mutex_lock(&ata_mtx);
|
|
#endif
|
|
|
|
if (start + incount > total_sectors) {
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
|
|
last_disk_activity = current_tick;
|
|
spinup_start = current_tick;
|
|
|
|
ata_led(true);
|
|
|
|
if ( sleeping ) {
|
|
spinup = true;
|
|
if (poweroff) {
|
|
if (ata_power_on()) {
|
|
ret = -2;
|
|
goto error;
|
|
}
|
|
}
|
|
else {
|
|
if (perform_soft_reset()) {
|
|
ret = -2;
|
|
goto error;
|
|
}
|
|
}
|
|
}
|
|
|
|
timeout = current_tick + READ_TIMEOUT;
|
|
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
if (!wait_for_rdy())
|
|
{
|
|
ret = -3;
|
|
goto error;
|
|
}
|
|
|
|
retry:
|
|
buf = inbuf;
|
|
count = incount;
|
|
while (TIME_BEFORE(current_tick, timeout)) {
|
|
ret = 0;
|
|
last_disk_activity = current_tick;
|
|
|
|
#ifdef HAVE_LBA48
|
|
if (lba48)
|
|
{
|
|
SET_REG(ATA_NSECTOR, count >> 8);
|
|
SET_REG(ATA_NSECTOR, count & 0xff);
|
|
SET_REG(ATA_SECTOR, (start >> 24) & 0xff); /* 31:24 */
|
|
SET_REG(ATA_SECTOR, start & 0xff); /* 7:0 */
|
|
SET_REG(ATA_LCYL, 0); /* 39:32 */
|
|
SET_REG(ATA_LCYL, (start >> 8) & 0xff); /* 15:8 */
|
|
SET_REG(ATA_HCYL, 0); /* 47:40 */
|
|
SET_REG(ATA_HCYL, (start >> 16) & 0xff); /* 23:16 */
|
|
SET_REG(ATA_SELECT, SELECT_LBA | ata_device);
|
|
SET_REG(ATA_COMMAND, CMD_READ_MULTIPLE_EXT);
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
SET_REG(ATA_NSECTOR, count & 0xff); /* 0 means 256 sectors */
|
|
SET_REG(ATA_SECTOR, start & 0xff);
|
|
SET_REG(ATA_LCYL, (start >> 8) & 0xff);
|
|
SET_REG(ATA_HCYL, (start >> 16) & 0xff);
|
|
SET_REG(ATA_SELECT, ((start >> 24) & 0xf) | SELECT_LBA | ata_device);
|
|
SET_REG(ATA_COMMAND, CMD_READ_MULTIPLE);
|
|
}
|
|
|
|
/* wait at least 400ns between writing command and reading status */
|
|
__asm__ volatile ("nop");
|
|
__asm__ volatile ("nop");
|
|
__asm__ volatile ("nop");
|
|
__asm__ volatile ("nop");
|
|
__asm__ volatile ("nop");
|
|
|
|
while (count) {
|
|
int sectors;
|
|
int wordcount;
|
|
int status;
|
|
|
|
if (!wait_for_start_of_transfer()) {
|
|
/* We have timed out waiting for RDY and/or DRQ, possibly
|
|
because the hard drive is shaking and has problems reading
|
|
the data. We have two options:
|
|
1) Wait some more
|
|
2) Perform a soft reset and try again.
|
|
|
|
We choose alternative 2.
|
|
*/
|
|
perform_soft_reset();
|
|
ret = -5;
|
|
goto retry;
|
|
}
|
|
|
|
if (spinup) {
|
|
spinup_time = current_tick - spinup_start;
|
|
spinup = false;
|
|
sleeping = false;
|
|
poweroff = false;
|
|
}
|
|
|
|
/* read the status register exactly once per loop */
|
|
status = ATA_STATUS;
|
|
|
|
if (count >= multisectors )
|
|
sectors = multisectors;
|
|
else
|
|
sectors = count;
|
|
|
|
wordcount = sectors * SECTOR_SIZE / 2;
|
|
|
|
copy_read_sectors(buf, wordcount);
|
|
|
|
/*
|
|
"Device errors encountered during READ MULTIPLE commands are
|
|
posted at the beginning of the block or partial block transfer,
|
|
but the DRQ bit is still set to one and the data transfer shall
|
|
take place, including transfer of corrupted data, if any."
|
|
-- ATA specification
|
|
*/
|
|
if ( status & (STATUS_BSY | STATUS_ERR | STATUS_DF) ) {
|
|
perform_soft_reset();
|
|
ret = -6;
|
|
goto retry;
|
|
}
|
|
|
|
buf += sectors * SECTOR_SIZE; /* Advance one chunk of sectors */
|
|
count -= sectors;
|
|
|
|
last_disk_activity = current_tick;
|
|
}
|
|
|
|
if(!ret && !wait_for_end_of_transfer()) {
|
|
perform_soft_reset();
|
|
ret = -4;
|
|
goto retry;
|
|
}
|
|
break;
|
|
}
|
|
|
|
error:
|
|
ata_led(false);
|
|
#ifndef MAX_PHYS_SECTOR_SIZE
|
|
mutex_unlock(&ata_mtx);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifndef ATA_OPTIMIZED_WRITING
|
|
STATICIRAM ICODE_ATTR void copy_write_sectors(const unsigned char* buf,
|
|
int wordcount)
|
|
{
|
|
if ( (unsigned long)buf & 1)
|
|
{ /* not 16-bit aligned, copy byte by byte */
|
|
unsigned short tmp = 0;
|
|
const unsigned char* bufend = buf + wordcount*2;
|
|
do
|
|
{
|
|
#if defined(SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
|
|
tmp = (unsigned short) *buf++;
|
|
tmp |= (unsigned short) *buf++ << 8;
|
|
SET_16BITREG(ATA_DATA, tmp);
|
|
#else
|
|
tmp = (unsigned short) *buf++ << 8;
|
|
tmp |= (unsigned short) *buf++;
|
|
SET_16BITREG(ATA_DATA, tmp);
|
|
#endif
|
|
} while (buf < bufend); /* tail loop is faster */
|
|
}
|
|
else
|
|
{ /* 16-bit aligned, can do faster copy */
|
|
unsigned short* wbuf = (unsigned short*)buf;
|
|
unsigned short* wbufend = wbuf + wordcount;
|
|
do
|
|
{
|
|
#ifdef SWAP_WORDS
|
|
SET_16BITREG(ATA_DATA, swap16(*wbuf));
|
|
#else
|
|
SET_16BITREG(ATA_DATA, *wbuf);
|
|
#endif
|
|
} while (++wbuf < wbufend); /* tail loop is faster */
|
|
}
|
|
}
|
|
#endif /* !ATA_OPTIMIZED_WRITING */
|
|
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
static int _write_sectors(unsigned long start,
|
|
int count,
|
|
const void* buf)
|
|
#else
|
|
int ata_write_sectors(IF_MV2(int drive,)
|
|
unsigned long start,
|
|
int count,
|
|
const void* buf)
|
|
#endif
|
|
{
|
|
int i;
|
|
int ret = 0;
|
|
long spinup_start;
|
|
|
|
#ifndef MAX_PHYS_SECTOR_SIZE
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive; /* unused for now */
|
|
#endif
|
|
mutex_lock(&ata_mtx);
|
|
#endif
|
|
|
|
if (start + count > total_sectors)
|
|
panicf("Writing past end of disk");
|
|
|
|
last_disk_activity = current_tick;
|
|
spinup_start = current_tick;
|
|
|
|
ata_led(true);
|
|
|
|
if ( sleeping ) {
|
|
spinup = true;
|
|
if (poweroff) {
|
|
if (ata_power_on()) {
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
}
|
|
else {
|
|
if (perform_soft_reset()) {
|
|
ret = -1;
|
|
goto error;
|
|
}
|
|
}
|
|
}
|
|
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
if (!wait_for_rdy())
|
|
{
|
|
ret = -2;
|
|
goto error;
|
|
}
|
|
|
|
#ifdef HAVE_LBA48
|
|
if (lba48)
|
|
{
|
|
SET_REG(ATA_NSECTOR, count >> 8);
|
|
SET_REG(ATA_NSECTOR, count & 0xff);
|
|
SET_REG(ATA_SECTOR, (start >> 24) & 0xff); /* 31:24 */
|
|
SET_REG(ATA_SECTOR, start & 0xff); /* 7:0 */
|
|
SET_REG(ATA_LCYL, 0); /* 39:32 */
|
|
SET_REG(ATA_LCYL, (start >> 8) & 0xff); /* 15:8 */
|
|
SET_REG(ATA_HCYL, 0); /* 47:40 */
|
|
SET_REG(ATA_HCYL, (start >> 16) & 0xff); /* 23:16 */
|
|
SET_REG(ATA_SELECT, SELECT_LBA | ata_device);
|
|
SET_REG(ATA_COMMAND, CMD_WRITE_SECTORS_EXT);
|
|
}
|
|
else
|
|
#endif
|
|
{
|
|
SET_REG(ATA_NSECTOR, count & 0xff); /* 0 means 256 sectors */
|
|
SET_REG(ATA_SECTOR, start & 0xff);
|
|
SET_REG(ATA_LCYL, (start >> 8) & 0xff);
|
|
SET_REG(ATA_HCYL, (start >> 16) & 0xff);
|
|
SET_REG(ATA_SELECT, ((start >> 24) & 0xf) | SELECT_LBA | ata_device);
|
|
SET_REG(ATA_COMMAND, CMD_WRITE_SECTORS);
|
|
}
|
|
|
|
for (i=0; i<count; i++) {
|
|
|
|
if (!wait_for_start_of_transfer()) {
|
|
ret = -3;
|
|
break;
|
|
}
|
|
|
|
if (spinup) {
|
|
spinup_time = current_tick - spinup_start;
|
|
spinup = false;
|
|
sleeping = false;
|
|
poweroff = false;
|
|
}
|
|
|
|
copy_write_sectors(buf, SECTOR_SIZE/2);
|
|
|
|
#ifdef USE_INTERRUPT
|
|
/* reading the status register clears the interrupt */
|
|
j = ATA_STATUS;
|
|
#endif
|
|
buf += SECTOR_SIZE;
|
|
|
|
last_disk_activity = current_tick;
|
|
}
|
|
|
|
if(!ret && !wait_for_end_of_transfer()) {
|
|
DEBUGF("End on transfer failed. -- jyp");
|
|
ret = -4;
|
|
}
|
|
|
|
error:
|
|
ata_led(false);
|
|
#ifndef MAX_PHYS_SECTOR_SIZE
|
|
mutex_unlock(&ata_mtx);
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
static int cache_sector(unsigned long sector)
|
|
{
|
|
int rc;
|
|
|
|
sector &= ~(phys_sector_mult - 1);
|
|
/* round down to physical sector boundary */
|
|
|
|
/* check whether the sector is already cached */
|
|
if (sector_cache.inuse && (sector_cache.sectornum == sector))
|
|
return 0;
|
|
|
|
/* not found: read the sector */
|
|
sector_cache.inuse = false;
|
|
rc = _read_sectors(sector, phys_sector_mult, sector_cache.data);
|
|
if (!rc)
|
|
{
|
|
sector_cache.sectornum = sector;
|
|
sector_cache.inuse = true;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static inline int flush_current_sector(void)
|
|
{
|
|
return _write_sectors(sector_cache.sectornum, phys_sector_mult,
|
|
sector_cache.data);
|
|
}
|
|
|
|
int ata_read_sectors(IF_MV2(int drive,)
|
|
unsigned long start,
|
|
int incount,
|
|
void* inbuf)
|
|
{
|
|
int rc = 0;
|
|
int offset;
|
|
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive; /* unused for now */
|
|
#endif
|
|
mutex_lock(&ata_mtx);
|
|
|
|
offset = start & (phys_sector_mult - 1);
|
|
|
|
if (offset) /* first partial sector */
|
|
{
|
|
int partcount = MIN(incount, phys_sector_mult - offset);
|
|
|
|
rc = cache_sector(start);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 1;
|
|
goto error;
|
|
}
|
|
memcpy(inbuf, sector_cache.data + offset * SECTOR_SIZE,
|
|
partcount * SECTOR_SIZE);
|
|
|
|
start += partcount;
|
|
inbuf += partcount * SECTOR_SIZE;
|
|
incount -= partcount;
|
|
}
|
|
if (incount)
|
|
{
|
|
offset = incount & (phys_sector_mult - 1);
|
|
incount -= offset;
|
|
|
|
if (incount)
|
|
{
|
|
rc = _read_sectors(start, incount, inbuf);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 2;
|
|
goto error;
|
|
}
|
|
start += incount;
|
|
inbuf += incount * SECTOR_SIZE;
|
|
}
|
|
if (offset)
|
|
{
|
|
rc = cache_sector(start);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 3;
|
|
goto error;
|
|
}
|
|
memcpy(inbuf, sector_cache.data, offset * SECTOR_SIZE);
|
|
}
|
|
}
|
|
|
|
error:
|
|
mutex_unlock(&ata_mtx);
|
|
|
|
return rc;
|
|
}
|
|
|
|
int ata_write_sectors(IF_MV2(int drive,)
|
|
unsigned long start,
|
|
int count,
|
|
const void* buf)
|
|
{
|
|
int rc = 0;
|
|
int offset;
|
|
|
|
#ifdef HAVE_MULTIVOLUME
|
|
(void)drive; /* unused for now */
|
|
#endif
|
|
mutex_lock(&ata_mtx);
|
|
|
|
offset = start & (phys_sector_mult - 1);
|
|
|
|
if (offset) /* first partial sector */
|
|
{
|
|
int partcount = MIN(count, phys_sector_mult - offset);
|
|
|
|
rc = cache_sector(start);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 1;
|
|
goto error;
|
|
}
|
|
memcpy(sector_cache.data + offset * SECTOR_SIZE, buf,
|
|
partcount * SECTOR_SIZE);
|
|
rc = flush_current_sector();
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 2;
|
|
goto error;
|
|
}
|
|
start += partcount;
|
|
buf += partcount * SECTOR_SIZE;
|
|
count -= partcount;
|
|
}
|
|
if (count)
|
|
{
|
|
offset = count & (phys_sector_mult - 1);
|
|
count -= offset;
|
|
|
|
if (count)
|
|
{
|
|
rc = _write_sectors(start, count, buf);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 3;
|
|
goto error;
|
|
}
|
|
start += count;
|
|
buf += count * SECTOR_SIZE;
|
|
}
|
|
if (offset)
|
|
{
|
|
rc = cache_sector(start);
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 4;
|
|
goto error;
|
|
}
|
|
memcpy(sector_cache.data, buf, offset * SECTOR_SIZE);
|
|
rc = flush_current_sector();
|
|
if (rc)
|
|
{
|
|
rc = rc * 10 - 5;
|
|
goto error;
|
|
}
|
|
}
|
|
}
|
|
|
|
error:
|
|
mutex_unlock(&ata_mtx);
|
|
|
|
return rc;
|
|
}
|
|
#endif /* MAX_PHYS_SECTOR_SIZE */
|
|
|
|
static int check_registers(void)
|
|
{
|
|
int i;
|
|
if ( ATA_STATUS & STATUS_BSY )
|
|
return -1;
|
|
|
|
for (i = 0; i<64; i++) {
|
|
SET_REG(ATA_NSECTOR, WRITE_PATTERN1);
|
|
SET_REG(ATA_SECTOR, WRITE_PATTERN2);
|
|
SET_REG(ATA_LCYL, WRITE_PATTERN3);
|
|
SET_REG(ATA_HCYL, WRITE_PATTERN4);
|
|
|
|
if (((ATA_NSECTOR & READ_PATTERN1_MASK) == READ_PATTERN1) &&
|
|
((ATA_SECTOR & READ_PATTERN2_MASK) == READ_PATTERN2) &&
|
|
((ATA_LCYL & READ_PATTERN3_MASK) == READ_PATTERN3) &&
|
|
((ATA_HCYL & READ_PATTERN4_MASK) == READ_PATTERN4))
|
|
return 0;
|
|
}
|
|
return -2;
|
|
}
|
|
|
|
static int freeze_lock(void)
|
|
{
|
|
/* does the disk support Security Mode feature set? */
|
|
if (identify_info[82] & 2)
|
|
{
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
|
|
if (!wait_for_rdy())
|
|
return -1;
|
|
|
|
SET_REG(ATA_COMMAND, CMD_SECURITY_FREEZE_LOCK);
|
|
|
|
if (!wait_for_rdy())
|
|
return -2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ata_spindown(int seconds)
|
|
{
|
|
sleep_timeout = seconds * HZ;
|
|
}
|
|
|
|
bool ata_disk_is_active(void)
|
|
{
|
|
return !sleeping;
|
|
}
|
|
|
|
static int ata_perform_sleep(void)
|
|
{
|
|
mutex_lock(&ata_mtx);
|
|
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
|
|
if(!wait_for_rdy()) {
|
|
DEBUGF("ata_perform_sleep() - not RDY\n");
|
|
mutex_unlock(&ata_mtx);
|
|
return -1;
|
|
}
|
|
|
|
SET_REG(ATA_COMMAND, CMD_SLEEP);
|
|
|
|
if (!wait_for_rdy())
|
|
{
|
|
DEBUGF("ata_perform_sleep() - CMD failed\n");
|
|
mutex_unlock(&ata_mtx);
|
|
return -2;
|
|
}
|
|
|
|
sleeping = true;
|
|
mutex_unlock(&ata_mtx);
|
|
return 0;
|
|
}
|
|
|
|
void ata_sleep(void)
|
|
{
|
|
queue_post(&ata_queue, Q_SLEEP, 0);
|
|
}
|
|
|
|
void ata_sleepnow(void)
|
|
{
|
|
if (!spinup && !sleeping && !ata_mtx.locked && initialized)
|
|
{
|
|
call_storage_idle_notifys(false);
|
|
ata_perform_sleep();
|
|
}
|
|
}
|
|
|
|
void ata_spin(void)
|
|
{
|
|
last_user_activity = current_tick;
|
|
}
|
|
|
|
static void ata_thread(void)
|
|
{
|
|
static long last_sleep = 0;
|
|
struct queue_event ev;
|
|
static long last_seen_mtx_unlock = 0;
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
static bool usb_mode = false;
|
|
#endif
|
|
|
|
while (1) {
|
|
queue_wait_w_tmo(&ata_queue, &ev, HZ/2);
|
|
|
|
switch ( ev.id ) {
|
|
case SYS_TIMEOUT:
|
|
if (!spinup && !sleeping)
|
|
{
|
|
if (!ata_mtx.locked)
|
|
{
|
|
if (!last_seen_mtx_unlock)
|
|
last_seen_mtx_unlock = current_tick;
|
|
if (TIME_AFTER(current_tick, last_seen_mtx_unlock+(HZ*2)))
|
|
{
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
if(!usb_mode)
|
|
#endif
|
|
{
|
|
call_storage_idle_notifys(false);
|
|
}
|
|
last_seen_mtx_unlock = 0;
|
|
}
|
|
}
|
|
if ( sleep_timeout &&
|
|
TIME_AFTER( current_tick,
|
|
last_user_activity + sleep_timeout ) &&
|
|
TIME_AFTER( current_tick,
|
|
last_disk_activity + sleep_timeout ) )
|
|
{
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
if(!usb_mode)
|
|
#endif
|
|
{
|
|
call_storage_idle_notifys(true);
|
|
}
|
|
ata_perform_sleep();
|
|
last_sleep = current_tick;
|
|
}
|
|
}
|
|
|
|
#ifdef HAVE_ATA_POWER_OFF
|
|
if ( !spinup && sleeping && !poweroff &&
|
|
TIME_AFTER( current_tick, last_sleep + ATA_POWER_OFF_TIMEOUT ))
|
|
{
|
|
mutex_lock(&ata_mtx);
|
|
ide_power_enable(false);
|
|
poweroff = true;
|
|
mutex_unlock(&ata_mtx);
|
|
}
|
|
#endif
|
|
break;
|
|
|
|
#ifndef USB_NONE
|
|
case SYS_USB_CONNECTED:
|
|
/* Tell the USB thread that we are safe */
|
|
DEBUGF("ata_thread got SYS_USB_CONNECTED\n");
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
usb_mode = true;
|
|
usb_acknowledge(SYS_USB_CONNECTED_ACK);
|
|
/* There is no need to force ATA power on */
|
|
#else
|
|
if (sleeping) {
|
|
mutex_lock(&ata_mtx);
|
|
ata_led(true);
|
|
if (poweroff) {
|
|
ata_power_on();
|
|
poweroff = false;
|
|
}
|
|
else {
|
|
perform_soft_reset();
|
|
}
|
|
sleeping = false;
|
|
ata_led(false);
|
|
mutex_unlock(&ata_mtx);
|
|
}
|
|
|
|
/* Wait until the USB cable is extracted again */
|
|
usb_acknowledge(SYS_USB_CONNECTED_ACK);
|
|
usb_wait_for_disconnect(&ata_queue);
|
|
#endif
|
|
break;
|
|
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
case SYS_USB_DISCONNECTED:
|
|
/* Tell the USB thread that we are ready again */
|
|
DEBUGF("ata_thread got SYS_USB_DISCONNECTED\n");
|
|
usb_acknowledge(SYS_USB_DISCONNECTED_ACK);
|
|
usb_mode = false;
|
|
break;
|
|
#endif
|
|
#endif /* USB_NONE */
|
|
|
|
case Q_SLEEP:
|
|
#ifdef ALLOW_USB_SPINDOWN
|
|
if(!usb_mode)
|
|
#endif
|
|
{
|
|
call_storage_idle_notifys(false);
|
|
}
|
|
last_disk_activity = current_tick - sleep_timeout + (HZ/2);
|
|
break;
|
|
|
|
#ifdef ATA_DRIVER_CLOSE
|
|
case Q_CLOSE:
|
|
return;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Hardware reset protocol as specified in chapter 9.1, ATA spec draft v5 */
|
|
static int ata_hard_reset(void)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&ata_mtx);
|
|
|
|
ata_reset();
|
|
|
|
/* state HRR2 */
|
|
SET_REG(ATA_SELECT, ata_device); /* select the right device */
|
|
ret = wait_for_bsy();
|
|
|
|
/* Massage the return code so it is 0 on success and -1 on failure */
|
|
ret = ret?0:-1;
|
|
|
|
mutex_unlock(&ata_mtx);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int perform_soft_reset(void)
|
|
{
|
|
/* If this code is allowed to run on a Nano, the next reads from the flash will
|
|
* time out, so we disable it. It shouldn't be necessary anyway, since the
|
|
* ATA -> Flash interface automatically sleeps almost immediately after the
|
|
* last command.
|
|
*/
|
|
int ret;
|
|
int retry_count;
|
|
|
|
SET_REG(ATA_SELECT, SELECT_LBA | ata_device );
|
|
SET_REG(ATA_CONTROL, CONTROL_nIEN|CONTROL_SRST );
|
|
sleep(1); /* >= 5us */
|
|
|
|
SET_REG(ATA_CONTROL, CONTROL_nIEN);
|
|
sleep(1); /* >2ms */
|
|
|
|
/* This little sucker can take up to 30 seconds */
|
|
retry_count = 8;
|
|
do
|
|
{
|
|
ret = wait_for_rdy();
|
|
} while(!ret && retry_count--);
|
|
|
|
if (!ret)
|
|
return -1;
|
|
|
|
if (set_features())
|
|
return -2;
|
|
|
|
if (set_multiple_mode(multisectors))
|
|
return -3;
|
|
|
|
if (freeze_lock())
|
|
return -4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ata_soft_reset(void)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&ata_mtx);
|
|
|
|
ret = perform_soft_reset();
|
|
|
|
mutex_unlock(&ata_mtx);
|
|
return ret;
|
|
}
|
|
|
|
static int ata_power_on(void)
|
|
{
|
|
int rc;
|
|
|
|
ide_power_enable(true);
|
|
sleep(HZ/4); /* allow voltage to build up */
|
|
|
|
/* Accessing the PP IDE controller too early after powering up the disk
|
|
* makes the core hang for a short time, causing an audio dropout. This
|
|
* also depends on the disk; iPod Mini G2 needs at least HZ/5 to get rid
|
|
* of the dropout. Since this time isn't additive (the wait_for_bsy() in
|
|
* ata_hard_reset() will shortened by the same amount), it's a good idea
|
|
* to do this on all HDD based targets. */
|
|
|
|
if( ata_hard_reset() )
|
|
return -1;
|
|
|
|
rc = set_features();
|
|
if (rc)
|
|
return rc * 10 - 2;
|
|
|
|
if (set_multiple_mode(multisectors))
|
|
return -3;
|
|
|
|
if (freeze_lock())
|
|
return -4;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int master_slave_detect(void)
|
|
{
|
|
/* master? */
|
|
SET_REG(ATA_SELECT, 0);
|
|
if ( ATA_STATUS & (STATUS_RDY|STATUS_BSY) ) {
|
|
ata_device = 0;
|
|
DEBUGF("Found master harddisk\n");
|
|
}
|
|
else {
|
|
/* slave? */
|
|
SET_REG(ATA_SELECT, SELECT_DEVICE1);
|
|
if ( ATA_STATUS & (STATUS_RDY|STATUS_BSY) ) {
|
|
ata_device = SELECT_DEVICE1;
|
|
DEBUGF("Found slave harddisk\n");
|
|
}
|
|
else
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int identify(void)
|
|
{
|
|
int i;
|
|
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
|
|
if(!wait_for_rdy()) {
|
|
DEBUGF("identify() - not RDY\n");
|
|
return -1;
|
|
}
|
|
SET_REG(ATA_COMMAND, CMD_IDENTIFY);
|
|
|
|
if (!wait_for_start_of_transfer())
|
|
{
|
|
DEBUGF("identify() - CMD failed\n");
|
|
return -2;
|
|
}
|
|
|
|
for (i=0; i<SECTOR_SIZE/2; i++) {
|
|
/* the IDENTIFY words are already swapped, so we need to treat
|
|
this info differently that normal sector data */
|
|
#if defined(ROCKBOX_BIG_ENDIAN) && !defined(SWAP_WORDS)
|
|
identify_info[i] = swap16(ATA_DATA);
|
|
#else
|
|
identify_info[i] = ATA_DATA;
|
|
#endif
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_multiple_mode(int sectors)
|
|
{
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
|
|
if(!wait_for_rdy()) {
|
|
DEBUGF("set_multiple_mode() - not RDY\n");
|
|
return -1;
|
|
}
|
|
|
|
SET_REG(ATA_NSECTOR, sectors);
|
|
SET_REG(ATA_COMMAND, CMD_SET_MULTIPLE_MODE);
|
|
|
|
if (!wait_for_rdy())
|
|
{
|
|
DEBUGF("set_multiple_mode() - CMD failed\n");
|
|
return -2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_features(void)
|
|
{
|
|
static struct {
|
|
unsigned char id_word;
|
|
unsigned char id_bit;
|
|
unsigned char subcommand;
|
|
unsigned char parameter;
|
|
} features[] = {
|
|
{ 83, 14, 0x03, 0 }, /* force PIO mode */
|
|
{ 83, 3, 0x05, 0x80 }, /* adv. power management: lowest w/o standby */
|
|
{ 83, 9, 0x42, 0x80 }, /* acoustic management: lowest noise */
|
|
{ 82, 6, 0xaa, 0 }, /* enable read look-ahead */
|
|
};
|
|
int i;
|
|
int pio_mode = 2;
|
|
|
|
/* Find out the highest supported PIO mode */
|
|
if(identify_info[64] & 2)
|
|
pio_mode = 4;
|
|
else
|
|
if(identify_info[64] & 1)
|
|
pio_mode = 3;
|
|
|
|
/* Update the table: set highest supported pio mode that we also support */
|
|
features[0].parameter = 8 + pio_mode;
|
|
|
|
SET_REG(ATA_SELECT, ata_device);
|
|
|
|
if (!wait_for_rdy()) {
|
|
DEBUGF("set_features() - not RDY\n");
|
|
return -1;
|
|
}
|
|
|
|
for (i=0; i < (int)(sizeof(features)/sizeof(features[0])); i++) {
|
|
if (identify_info[features[i].id_word] & (1u << features[i].id_bit)) {
|
|
SET_REG(ATA_FEATURE, features[i].subcommand);
|
|
SET_REG(ATA_NSECTOR, features[i].parameter);
|
|
SET_REG(ATA_COMMAND, CMD_SET_FEATURES);
|
|
|
|
if (!wait_for_rdy()) {
|
|
DEBUGF("set_features() - CMD failed\n");
|
|
return -10 - i;
|
|
}
|
|
|
|
if((ATA_ALT_STATUS & STATUS_ERR) && (i != 1)) {
|
|
/* some CF cards don't like advanced powermanagement
|
|
even if they mark it as supported - go figure... */
|
|
if(ATA_ERROR & ERROR_ABRT) {
|
|
return -20 - i;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef ATA_SET_DEVICE_FEATURES
|
|
ata_set_pio_timings(pio_mode);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned short* ata_get_identify(void)
|
|
{
|
|
return identify_info;
|
|
}
|
|
|
|
static int init_and_check(bool hard_reset)
|
|
{
|
|
int rc;
|
|
|
|
if (hard_reset)
|
|
{
|
|
/* This should reset both master and slave, we don't yet know what's in */
|
|
ata_device = 0;
|
|
if (ata_hard_reset())
|
|
return -1;
|
|
}
|
|
|
|
rc = master_slave_detect();
|
|
if (rc)
|
|
return -10 + rc;
|
|
|
|
/* symptom fix: else check_registers() below may fail */
|
|
if (hard_reset && !wait_for_bsy())
|
|
return -20;
|
|
|
|
rc = check_registers();
|
|
if (rc)
|
|
return -30 + rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ata_init(void)
|
|
{
|
|
int rc = 0;
|
|
bool coldstart;
|
|
|
|
if ( !initialized ) {
|
|
mutex_init(&ata_mtx);
|
|
queue_init(&ata_queue, true);
|
|
}
|
|
|
|
mutex_lock(&ata_mtx);
|
|
|
|
/* must be called before ata_device_init() */
|
|
coldstart = ata_is_coldstart();
|
|
ata_led(false);
|
|
ata_device_init();
|
|
sleeping = false;
|
|
ata_enable(true);
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
memset(§or_cache, 0, sizeof(sector_cache));
|
|
#endif
|
|
|
|
if ( !initialized ) {
|
|
/* First call won't have multiple thread contention - this
|
|
* may return at any point without having to unlock */
|
|
mutex_unlock(&ata_mtx);
|
|
|
|
if (!ide_powered()) /* somebody has switched it off */
|
|
{
|
|
ide_power_enable(true);
|
|
sleep(HZ/4); /* allow voltage to build up */
|
|
}
|
|
|
|
/* first try, hard reset at cold start only */
|
|
rc = init_and_check(coldstart);
|
|
|
|
if (rc)
|
|
{ /* failed? -> second try, always with hard reset */
|
|
DEBUGF("ata: init failed, retrying...\n");
|
|
rc = init_and_check(true);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
rc = identify();
|
|
|
|
if (rc)
|
|
return -40 + rc;
|
|
|
|
multisectors = identify_info[47] & 0xff;
|
|
if (multisectors == 0) /* Invalid multisector info, try with 16 */
|
|
multisectors = 16;
|
|
|
|
DEBUGF("ata: %d sectors per ata request\n",multisectors);
|
|
|
|
#ifdef MAX_PHYS_SECTOR_SIZE
|
|
/* Find out the physical sector size */
|
|
if((identify_info[106] & 0xe000) == 0x6000)
|
|
phys_sector_mult = 1 << (identify_info[106] & 0x000f);
|
|
else
|
|
phys_sector_mult = 1;
|
|
|
|
DEBUGF("ata: %d logical sectors per phys sector", phys_sector_mult);
|
|
|
|
if (phys_sector_mult > (MAX_PHYS_SECTOR_SIZE/SECTOR_SIZE))
|
|
panicf("Unsupported physical sector size: %d",
|
|
phys_sector_mult * SECTOR_SIZE);
|
|
#endif
|
|
|
|
total_sectors = identify_info[60] | (identify_info[61] << 16);
|
|
|
|
#ifdef HAVE_LBA48
|
|
if (identify_info[83] & 0x0400 /* 48 bit address support */
|
|
&& total_sectors == 0x0FFFFFFF) /* and disk size >= 128 GiB */
|
|
{ /* (needs BigLBA addressing) */
|
|
if (identify_info[102] || identify_info[103])
|
|
panicf("Unsupported disk size: >= 2^32 sectors");
|
|
|
|
total_sectors = identify_info[100] | (identify_info[101] << 16);
|
|
lba48 = true; /* use BigLBA */
|
|
}
|
|
#endif
|
|
rc = freeze_lock();
|
|
|
|
if (rc)
|
|
return -50 + rc;
|
|
|
|
rc = set_features();
|
|
if (rc)
|
|
return -60 + rc;
|
|
|
|
mutex_lock(&ata_mtx); /* Balance unlock below */
|
|
|
|
last_disk_activity = current_tick;
|
|
#ifdef ATA_DRIVER_CLOSE
|
|
ata_thread_id =
|
|
#endif
|
|
create_thread(ata_thread, ata_stack,
|
|
sizeof(ata_stack), 0, ata_thread_name
|
|
IF_PRIO(, PRIORITY_USER_INTERFACE)
|
|
IF_COP(, CPU));
|
|
initialized = true;
|
|
|
|
}
|
|
rc = set_multiple_mode(multisectors);
|
|
if (rc)
|
|
rc = -70 + rc;
|
|
|
|
mutex_unlock(&ata_mtx);
|
|
return rc;
|
|
}
|
|
|
|
#ifdef ATA_DRIVER_CLOSE
|
|
void ata_close(void)
|
|
{
|
|
unsigned int thread_id = ata_thread_id;
|
|
|
|
if (thread_id == 0)
|
|
return;
|
|
|
|
ata_thread_id = 0;
|
|
|
|
queue_post(&ata_queue, Q_CLOSE, 0);
|
|
thread_wait(thread_id);
|
|
}
|
|
#endif /* ATA_DRIVER_CLOSE */
|
|
|
|
#if (CONFIG_LED == LED_REAL)
|
|
void ata_set_led_enabled(bool enabled)
|
|
{
|
|
ata_led_enabled = enabled;
|
|
if (ata_led_enabled)
|
|
led(ata_led_on);
|
|
else
|
|
led(false);
|
|
}
|
|
#endif
|
|
|
|
long ata_last_disk_activity(void)
|
|
{
|
|
return last_disk_activity;
|
|
}
|
|
|
|
int ata_spinup_time(void)
|
|
{
|
|
return spinup_time;
|
|
}
|
|
|
|
#ifdef STORAGE_GET_INFO
|
|
void ata_get_info(struct storage_info *info)
|
|
{
|
|
unsigned short *src,*dest;
|
|
static char vendor[8];
|
|
static char product[16];
|
|
static char revision[4];
|
|
int i;
|
|
info->sector_size = SECTOR_SIZE;
|
|
info->num_sectors= total_sectors;
|
|
|
|
src = (unsigned short*)&identify_info[27];
|
|
dest = (unsigned short*)vendor;
|
|
for (i=0;i<4;i++)
|
|
dest[i] = htobe16(src[i]);
|
|
info->vendor=vendor;
|
|
|
|
src = (unsigned short*)&identify_info[31];
|
|
dest = (unsigned short*)product;
|
|
for (i=0;i<8;i++)
|
|
dest[i] = htobe16(src[i]);
|
|
info->product=product;
|
|
|
|
src = (unsigned short*)&identify_info[23];
|
|
dest = (unsigned short*)revision;
|
|
for (i=0;i<2;i++)
|
|
dest[i] = htobe16(src[i]);
|
|
info->revision=revision;
|
|
}
|
|
#endif
|