| .. |
|
common
|
ZVM:
|
2008-09-07 17:24:14 +00:00 |
|
decompressor
|
Make a local function static.
|
2008-09-25 00:09:45 +00:00 |
|
drivers
|
implement usb_drv_release_endpoint() and usb_drv_request_endpoint() (a.k.a. fix red)
|
2008-10-03 23:08:11 +00:00 |
|
export
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
include
|
Add wpseditor, the Google Summer of Code 2008 project of Rostislav Chekan. Closes FS#9327
|
2008-08-29 21:08:38 +00:00 |
|
target
|
Fix LCD timings on the older meizu M3 variant, so it works with a fast clock.
|
2008-10-12 16:55:57 +00:00 |
|
test
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usbstack
|
disable logf again
|
2008-10-03 22:49:36 +00:00 |
|
arabjoin.c
|
|
|
|
arabjoin.h
|
|
|
|
ata_idle_notify.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
backlight.c
|
Revert v18522 for firmware/backlight.c, it breaks a couple of bootloaders
|
2008-09-15 20:01:07 +00:00 |
|
bidi.c
|
Disable bidirectional text handling and arabic joining in the bootloaders in order to save space. * Disable greyblitting in archos bootloaders for the same reason.
|
2008-09-23 18:46:27 +00:00 |
|
buffer.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
COPYING
|
|
|
|
debug.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
events.c
|
Apply FS#9155 (Simplified battery bench). This is a simplification/rework of the current battery bench code. Battery measurements are now done simply once a minute (no more dependency on HDD specific timeouts) and are flushed to disk by using the ata_idle callback instead of polling ata_disk_is_active (this call is removed from the plugin API now) to make the plugin as unobtrusive as possible. This battery bench plugin also works for flash-based targets like sansa e200.
|
2008-08-14 22:35:00 +00:00 |
|
font.c
|
Disable the whole loadable font code including font caching for bootloaders/ bootbox.
|
2008-09-23 21:35:54 +00:00 |
|
font_cache.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hangul.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hotswap.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ifp_usb_serial.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
kernel.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lru.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
Makefile
|
Limit the buil-in font to ASCII for bootloaders.
|
2008-09-24 21:29:18 +00:00 |
|
mp3_playback.c
|
Make local function static in mp3_playback.c and match usb_init_device prototype to implementation for Archos recorder
|
2008-09-12 20:57:19 +00:00 |
|
mp3data.c
|
Add wpseditor, the Google Summer of Code 2008 project of Rostislav Chekan. Closes FS#9327
|
2008-08-29 21:08:38 +00:00 |
|
panic.c
|
Change 18 char limit to (LCD_WIDTH/SYSFONT_WIDTH) in panicf() (FS#9282)
|
2008-08-15 16:49:02 +00:00 |
|
pcm.c
|
Fix a slightly misleading logf
|
2008-07-13 17:34:58 +00:00 |
|
pcm_record.c
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
pcm_sampr.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
powermgmt.c
|
Bootloaders don't need special handling in sys_poweroff() for recording targets.
|
2008-10-12 12:28:41 +00:00 |
|
profile.c
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
README
|
|
|
|
rolo.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rom.lds
|
Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
|
2008-04-29 06:19:32 +00:00 |
|
scroll_engine.c
|
revert that scroll engine stuff... good in theory, but broken.
|
2008-07-02 13:02:57 +00:00 |
|
sound.c
|
iPod Video: Fix playback after recording (FS #7402). Implement recording gain adjustment. * Enable timeout for zero-crossing detection (SLOWCLK), avoids hanging volume/ gain due to DC offsets.
|
2008-09-13 19:34:16 +00:00 |
|
SOURCES
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
system.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
thread.c
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
timer.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tuner.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb.c
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
2cc85bc346