Jens Arnold 7c37c54ce5 iPod 1st Gen: Dynamic wheel enable. This reduces wheel power consumption to about 0.5% when hold is not enabled and there is no activity, and keeps it disabled on hold. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14386 a1c6a512-1295-4272-9138-f99709370657		2007-08-18 09:47:19 +00:00
..
1g2g	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
3g	iPod 2nd gen: * Fake battery voltage of 4.00V so rockbox doesn't shutdown (ADC is not yet implemented). * Fix button hold polarity for main rockbox. * Implement backlight inversion (the 1st/2nd gen backlight works in a way that makes the LCD look inverted when active). * Fix default contrast and clean up target tree.	2007-07-27 12:05:54 +00:00
video
adc-ipod-pcf.c	First version of a 1st/2nd gen ADC driver. 1st gen is untested yet.	2007-07-30 20:12:03 +00:00
adc-target.h
backlight-4g_color.c
backlight-mini1g_mini2g.c
backlight-nano_video.c
backlight-target.h
button-1g-3g.c	iPod 1st Gen: Dynamic wheel enable. This reduces wheel power consumption to about 0.5% when hold is not enabled and there is no activity, and keeps it disabled on hold.	2007-08-18 09:47:19 +00:00
button-clickwheel.c
button-mini1g.c
button-target.h
lcd-color_nano.c	Remove the hack which read the ipod hardware revision from flash in the bootloader and passed it to Rockbox via a fixed address in SDRAM. Rockbox now remaps flash and so can just read the value itself. Also clean up the debug menu a little - only display the hw revision for ipods, and add the lcd_type variable to indicate the type of LCD (0 or 1) for ipod Color/Photo.	2007-07-25 13:12:38 +00:00
lcd-gray.c	iPod greyscale LCD driver: * Further speedup (timeout check turned out to be unnecessary, as well as setting the LCD control register every time on Mini G2. Put lcd_write_data() in IRAM on PP5002). * Better blacklevel stability on 1st...3rd gen. * lcd_enable() function in preparation for suspend on 1st/2nd gen, and shutdown without a black line remaining.	2007-08-10 08:09:53 +00:00
power-ipod.c	Disk poweroff for 3rd gen iPods.	2007-08-03 22:54:33 +00:00
powermgmt-ipod-pcf.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00