Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/drivers/isp1583.c
Daniel Stenberg 2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00

785 lines
22 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Tomasz Malesinski
* Copyright (C) 2008 by Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "usb_ch9.h"
#include "usb_drv.h"
#include "usb_core.h"
#include "isp1583.h"
#include "thread.h"
#include "logf.h"
#include <stdio.h>
#define DIR_RX 0
#define DIR_TX 1
struct usb_endpoint
{
unsigned char *out_buf;
short out_len;
short out_ptr;
void (*out_done)(int, unsigned char *, int);
unsigned char out_in_progress;
unsigned char *in_buf;
short in_min_len;
short in_max_len;
short in_ptr;
void (*in_done)(int, unsigned char *, int);
unsigned char in_ack;
unsigned char halt[2];
unsigned char enabled[2];
short max_pkt_size[2];
short type;
};
static unsigned char setup_pkt_buf[8];
static struct usb_endpoint endpoints[NUM_ENDPOINTS];
static bool high_speed_mode = false;
static inline void or_int_value(volatile unsigned short *a, volatile unsigned short *b, unsigned long r, unsigned long value)
{
set_int_value(*a, *b, (r | value));
}
static inline void bc_int_value(volatile unsigned short *a, volatile unsigned short *b, unsigned long r, unsigned long value)
{
set_int_value(*a, *b, (r & ~value));
}
static inline void nop_f(void)
{
yield();
}
#define NOP asm volatile("nop\n");
static inline int ep_index(int n, bool dir)
{
return (n << 1) | dir;
}
static inline bool epidx_dir(int idx)
{
return idx & 1;
}
static inline int epidx_n(int idx)
{
return idx >> 1;
}
static inline void usb_select_endpoint(int idx)
{
/* Select the endpoint */
ISP1583_DFLOW_EPINDEX = idx;
/* The delay time from the Write Endpoint Index register to the Read Data Port register must be at least 190 ns.
* The delay time from the Write Endpoint Index register to the Write Data Port register must be at least 100 ns.
*/
NOP;
}
static inline void usb_select_setup_endpoint(void)
{
/* Select the endpoint */
ISP1583_DFLOW_EPINDEX = DFLOW_EPINDEX_EP0SETUP;
/* The delay time from the Write Endpoint Index register to the Read Data Port register must be at least 190 ns.
* The delay time from the Write Endpoint Index register to the Write Data Port register must be at least 100 ns.
*/
NOP;
}
static void usb_setup_endpoint(int idx, int max_pkt_size, int type)
{
if(epidx_n(idx)!=0)
{
usb_select_endpoint(idx);
ISP1583_DFLOW_MAXPKSZ = max_pkt_size & 0x7FF;
ISP1583_DFLOW_EPTYPE = (DFLOW_EPTYPE_NOEMPKT | DFLOW_EPTYPE_DBLBUF | (type & 0x3));
/* clear buffer ... */
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_CLBUF;
/* ... twice because of double buffering */
usb_select_endpoint(idx);
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_CLBUF;
}
struct usb_endpoint *ep;
ep = &(endpoints[epidx_n(idx)]);
ep->halt[epidx_dir(idx)] = 0;
ep->enabled[epidx_dir(idx)] = 0;
ep->out_in_progress = 0;
ep->in_min_len = -1;
ep->in_ack = 0;
ep->type = type;
ep->max_pkt_size[epidx_dir(idx)] = max_pkt_size;
}
static void usb_enable_endpoint(int idx)
{
if(epidx_n(idx)!=0)
{
usb_select_endpoint(idx);
/* Enable interrupt */
or_int_value(&ISP1583_INIT_INTEN_A, &ISP1583_INIT_INTEN_B, ISP1583_INIT_INTEN_READ, 1 << (10 + idx));
/* Enable endpoint */
ISP1583_DFLOW_EPTYPE |= DFLOW_EPTYPE_ENABLE;
}
endpoints[epidx_n(idx)].enabled[epidx_dir(idx)] = 1;
}
/*
static void usb_disable_endpoint(int idx, bool set_struct)
{
usb_select_endpoint(idx);
ISP1583_DFLOW_EPTYPE &= ~DFLOW_EPTYPE_ENABLE;
bc_int_value(&ISP1583_INIT_INTEN_A, &ISP1583_INIT_INTEN_B, ISP1583_INIT_INTEN_READ, 1 << (10 + idx));
if(set_struct)
endpoints[epidx_n(idx)].enabled[epidx_dir(idx)] = 0;
}
*/
static int usb_get_packet(unsigned char *buf, int max_len)
{
int len, i;
len = ISP1583_DFLOW_BUFLEN;
if (max_len < 0 || max_len > len)
max_len = len;
i = 0;
while (i < len)
{
unsigned short d = ISP1583_DFLOW_DATA;
if (i < max_len)
buf[i] = d & 0xff;
i++;
if (i < max_len)
buf[i] = (d >> 8) & 0xff;
i++;
}
return max_len;
}
static int usb_receive(int n)
{
logf("usb_receive(%d)", n);
int len;
if (endpoints[n].halt[DIR_RX]
|| !endpoints[n].enabled[DIR_RX]
|| endpoints[n].in_min_len < 0
|| !endpoints[n].in_ack)
return -1;
endpoints[n].in_ack = 0;
usb_select_endpoint(ep_index(n, DIR_RX));
len = usb_get_packet(endpoints[n].in_buf + endpoints[n].in_ptr,
endpoints[n].in_max_len - endpoints[n].in_ptr);
endpoints[n].in_ptr += len;
if (endpoints[n].in_ptr >= endpoints[n].in_min_len) {
endpoints[n].in_min_len = -1;
if (endpoints[n].in_done)
(*(endpoints[n].in_done))(n, endpoints[n].in_buf,
endpoints[n].in_ptr);
}
logf("receive_end");
return 0;
}
static bool usb_out_buffer_full(int ep)
{
usb_select_endpoint(ep_index(ep, DIR_TX));
if (ISP1583_DFLOW_EPTYPE & 4) /* Check if type=bulk and double buffering is set */
return (ISP1583_DFLOW_BUFSTAT & 3) == 3; /* Return true if both buffers are filled */
else
return (ISP1583_DFLOW_BUFSTAT & 3) != 0; /* Return true if one of the buffers are filled */
}
static int usb_send(int n)
{
logf("usb_send(%d)", n);
int max_pkt_size, len;
int i;
unsigned char *p;
if (endpoints[n].halt[DIR_TX]
|| !endpoints[n].enabled[DIR_TX]
|| !endpoints[n].out_in_progress)
{
logf("NOT SEND TO EP!");
return -1;
}
if (endpoints[n].out_ptr < 0)
{
endpoints[n].out_in_progress = 0;
if (endpoints[n].out_done)
(*(endpoints[n].out_done))(n, endpoints[n].out_buf,
endpoints[n].out_len);
logf("ALREADY SENT TO EP!");
return -1;
}
if (usb_out_buffer_full(n))
{
logf("BUFFER FULL!");
return -1;
}
usb_select_endpoint(ep_index(n, DIR_TX));
max_pkt_size = endpoints[n].max_pkt_size[DIR_TX];
len = endpoints[n].out_len - endpoints[n].out_ptr;
if (len > max_pkt_size)
len = max_pkt_size;
if(len < max_pkt_size)
ISP1583_DFLOW_BUFLEN = len;
p = endpoints[n].out_buf + endpoints[n].out_ptr;
i = 0;
while (len - i >= 2) {
ISP1583_DFLOW_DATA = p[i] | (p[i + 1] << 8);
i += 2;
}
if (i < len)
ISP1583_DFLOW_DATA = p[i];
endpoints[n].out_ptr += len;
/*
if (endpoints[n].out_ptr == endpoints[n].out_len
&& len < max_pkt_size)
*/
if (endpoints[n].out_ptr == endpoints[n].out_len)
endpoints[n].out_ptr = -1;
logf("send_end");
return 0;
}
static void usb_stall_endpoint(int idx)
{
usb_select_endpoint(idx);
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_STALL;
endpoints[epidx_n(idx)].halt[epidx_dir(idx)] = 1;
}
static void usb_unstall_endpoint(int idx)
{
usb_select_endpoint(idx);
ISP1583_DFLOW_CTRLFUN &= ~DFLOW_CTRLFUN_STALL;
ISP1583_DFLOW_EPTYPE &= ~DFLOW_EPTYPE_ENABLE;
ISP1583_DFLOW_EPTYPE |= DFLOW_EPTYPE_ENABLE;
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_CLBUF;
if (epidx_dir(idx) == DIR_TX)
endpoints[epidx_n(idx)].out_in_progress = 0;
else
{
endpoints[epidx_n(idx)].in_min_len = -1;
endpoints[epidx_n(idx)].in_ack = 0;
}
endpoints[epidx_n(idx)].halt[epidx_dir(idx)] = 0;
}
static void usb_status_ack(int ep, int dir)
{
logf("usb_status_ack(%d)", dir);
usb_select_endpoint(ep_index(ep, dir));
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_STATUS;
}
static void usb_data_stage_enable(int ep, int dir)
{
logf("usb_data_stage_enable(%d)", dir);
usb_select_endpoint(ep_index(ep, dir));
ISP1583_DFLOW_CTRLFUN |= DFLOW_CTRLFUN_DSEN;
}
static void usb_handle_setup_rx(void)
{
int len;
usb_select_setup_endpoint();
len = usb_get_packet(setup_pkt_buf, 8);
if (len == 8)
usb_core_control_request((struct usb_ctrlrequest*)setup_pkt_buf);
else
{
usb_drv_stall(0, true, false);
usb_drv_stall(0, true, true);
logf("usb_handle_setup_rx() failed");
return;
}
logf("usb_handle_setup_rx(): %02x %02x %02x %02x %02x %02x %02x %02x", setup_pkt_buf[0], setup_pkt_buf[1], setup_pkt_buf[2], setup_pkt_buf[3], setup_pkt_buf[4], setup_pkt_buf[5], setup_pkt_buf[6], setup_pkt_buf[7]);
}
static void usb_handle_data_int(int ep, int dir)
{
int len;
if (dir == DIR_TX)
len = usb_send(ep);
else
{
len = usb_receive(ep);
endpoints[ep].in_ack = 1;
}
logf("usb_handle_data_int(%d, %d) finished", ep, dir);
}
bool usb_drv_powered(void)
{
#if 0
return (ISP1583_INIT_OTG & INIT_OTG_BSESS_VALID) ? true : false;
#else
return (ISP1583_INIT_MODE & INIT_MODE_VBUSSTAT) ? true : false;
#endif
}
static void setup_endpoints(void)
{
usb_setup_endpoint(ep_index(0, DIR_RX), 64, 0);
usb_setup_endpoint(ep_index(0, DIR_TX), 64, 0);
int i;
for(i = 1; i < NUM_ENDPOINTS-1; i++)
{
usb_setup_endpoint(ep_index(i, DIR_RX), (high_speed_mode ? 512 : 64), 2); /* 2 = TYPE_BULK */
usb_setup_endpoint(ep_index(i, DIR_TX), (high_speed_mode ? 512 : 64), 2);
}
usb_enable_endpoint(ep_index(0, DIR_RX));
usb_enable_endpoint(ep_index(0, DIR_TX));
for (i = 1; i < NUM_ENDPOINTS-1; i++)
{
usb_enable_endpoint(ep_index(i, DIR_RX));
usb_enable_endpoint(ep_index(i, DIR_TX));
}
ZVM_SPECIFIC;
}
void usb_helper(void)
{
if(ISP1583_GEN_INT_READ & ISP1583_INIT_INTEN_READ)
{
#ifdef DEBUG
logf("Helper detected interrupt... [%d]", current_tick);
#endif
usb_drv_int();
}
return;
}
void usb_drv_init(void)
{
/* Disable interrupt at CPU level */
DIS_INT_CPU_TARGET;
/* Unlock the device's registers */
ISP1583_GEN_UNLCKDEV = ISP1583_UNLOCK_CODE;
/* Soft reset the device */
ISP1583_INIT_MODE = INIT_MODE_SFRESET;
sleep(10);
/* Enable CLKAON & GLINTENA */
ISP1583_INIT_MODE = STANDARD_INIT_MODE;
/* Disable all OTG functions */
ISP1583_INIT_OTG = 0;
#if 0
#ifdef USE_HIGH_SPEED
/* Force device to high speed */
ISP1583_GEN_TSTMOD = GEN_TSTMOD_FORCEHS;
high_speed_mode = true;
#endif
#endif
#ifdef DEBUG
logf("BUS_CONF/DA0:%d MODE0/DA1: %d MODE1: %d", (bool)(ISP1583_INIT_MODE & INIT_MODE_TEST0), (bool)(ISP1583_INIT_MODE & INIT_MODE_TEST1), (bool)(ISP1583_INIT_MODE & INIT_MODE_TEST2));
logf("Chip ID: 0x%x", ISP1583_GEN_CHIPID);
//logf("INV0: 0x% IRQEDGE: 0x%x IRQPORT: 0x%x", IO_GIO_INV0, IO_GIO_IRQEDGE, IO_GIO_IRQPORT);
#endif
/*Set interrupt generation to target-specific mode +
* Set the control pipe to ACK only interrupt +
* Set the IN pipe to ACK only interrupt +
* Set OUT pipe to ACK and NYET interrupt
*/
ISP1583_INIT_INTCONF = 0x54 | INT_CONF_TARGET;
/* Clear all interrupts */
set_int_value(ISP1583_GEN_INT_A, ISP1583_GEN_INT_B, 0xFFFFFFFF);
/* Enable USB interrupts */
set_int_value(ISP1583_INIT_INTEN_A, ISP1583_INIT_INTEN_B, STANDARD_INTEN);
ZVM_SPECIFIC;
/* Enable interrupt at CPU level */
EN_INT_CPU_TARGET;
setup_endpoints();
/* Clear device address and disable it */
ISP1583_INIT_ADDRESS = 0;
/* Turn SoftConnect on */
ISP1583_INIT_MODE |= INIT_MODE_SOFTCT;
ZVM_SPECIFIC;
tick_add_task(usb_helper);
logf("usb_init_device() finished");
}
int usb_drv_port_speed(void)
{
return (int)high_speed_mode;
}
void usb_drv_exit(void)
{
logf("usb_drv_exit()");
/* Disable device */
ISP1583_INIT_MODE &= ~INIT_MODE_SOFTCT;
ISP1583_INIT_ADDRESS = 0;
/* Disable interrupts */
set_int_value(ISP1583_INIT_INTEN_A, ISP1583_INIT_INTEN_B, 0);
/* and the CPU's one... */
DIS_INT_CPU_TARGET;
/* Send usb controller to suspend mode */
ISP1583_INIT_MODE = INIT_MODE_GOSUSP;
ISP1583_INIT_MODE = 0;
tick_remove_task(usb_helper);
ZVM_SPECIFIC;
}
void usb_drv_stall(int endpoint, bool stall, bool in)
{
logf("%sstall EP%d %s", (stall ? "" : "un"), endpoint, (in ? "RX" : "TX" ));
if (stall)
usb_stall_endpoint(ep_index(endpoint, (int)in));
else
usb_unstall_endpoint(ep_index(endpoint, (int)in));
}
bool usb_drv_stalled(int endpoint, bool in)
{
return (endpoints[endpoint].halt[(int)in] == 1);
}
static void out_callback(int ep, unsigned char *buf, int len)
{
(void)buf;
logf("out_callback(%d, 0x%x, %d)", ep, &buf, len);
usb_status_ack(ep, DIR_RX);
usb_core_transfer_complete(ep, true, 0, len); /* 0=>status succeeded, haven't worked out status failed yet... */
}
static void in_callback(int ep, unsigned char *buf, int len)
{
(void)buf;
logf("in_callback(%d, 0x%x, %d)", ep, &buf, len);
usb_status_ack(ep, DIR_TX);
usb_core_transfer_complete(ep, false, 0, len);
}
int usb_drv_recv(int ep, void* ptr, int length)
{
logf("usb_drv_recv(%d, 0x%x, %d)", ep, &ptr, length);
if(ep == 0 && length == 0 && ptr == NULL)
{
usb_status_ack(ep, DIR_TX);
return 0;
}
endpoints[ep].in_done = in_callback;
endpoints[ep].in_buf = ptr;
endpoints[ep].in_max_len = length;
endpoints[ep].in_min_len = length;
endpoints[ep].in_ptr = 0;
if(ep == 0)
{
usb_data_stage_enable(ep, DIR_RX);
return usb_receive(ep);
}
else
return usb_receive(ep);
}
int usb_drv_send_nonblocking(int ep, void* ptr, int length)
{
/* First implement DMA... */
return usb_drv_send(ep, ptr, length);
}
int usb_drv_send(int ep, void* ptr, int length)
{
logf("usb_drv_send_nb(%d, 0x%x, %d)", ep, &ptr, length);
if(ep == 0 && length == 0 && ptr == NULL)
{
usb_status_ack(ep, DIR_RX);
return 0;
}
if(endpoints[ep].out_in_progress == 1)
return -1;
endpoints[ep].out_done = out_callback;
endpoints[ep].out_buf = ptr;
endpoints[ep].out_len = length;
endpoints[ep].out_ptr = 0;
endpoints[ep].out_in_progress = 1;
if(ep == 0)
{
int rc = usb_send(ep);
usb_data_stage_enable(ep, DIR_TX);
usb_drv_wait(ep, DIR_TX);
return rc;
}
else
return usb_send(ep);
}
void usb_drv_reset_endpoint(int ep, bool send)
{
logf("reset endpoint(%d, %d)", ep, send);
usb_setup_endpoint(ep_index(ep, (int)send), endpoints[ep].max_pkt_size[(int)send], endpoints[ep].type);
usb_enable_endpoint(ep_index(ep, (int)send));
}
void usb_drv_wait(int ep, bool send)
{
logf("usb_drv_wait(%d, %d)", ep, send);
if(send)
{
while (endpoints[ep].out_in_progress)
nop_f();
}
else
{
while (endpoints[ep].in_ack)
nop_f();
}
}
void usb_drv_cancel_all_transfers(void)
{
logf("usb_drv_cancel_all_tranfers()");
int i;
for(i=0;i<NUM_ENDPOINTS-1;i++)
endpoints[i].halt[0] = endpoints[i].halt[1] = 1;
}
static void bus_reset(void)
{
/* Enable CLKAON & GLINTENA */
ISP1583_INIT_MODE = STANDARD_INIT_MODE;
/* Enable USB interrupts */
ISP1583_INIT_INTCONF = 0x54 | INT_CONF_TARGET;
set_int_value(ISP1583_INIT_INTEN_A, ISP1583_INIT_INTEN_B, STANDARD_INTEN);
/* Disable all OTG functions */
ISP1583_INIT_OTG = 0;
/* Clear device address and enable it */
ISP1583_INIT_ADDRESS = INIT_ADDRESS_DEVEN;
ZVM_SPECIFIC;
/* Reset endpoints to default */
setup_endpoints();
logf("bus reset->done");
}
/* Method for handling interrupts, must be called from usb-<target>.c */
void IRAM_ATTR usb_drv_int(void)
{
unsigned long ints;
ints = ISP1583_GEN_INT_READ & ISP1583_INIT_INTEN_READ;
if(!ints)
return;
/* Unlock the device's registers */
ISP1583_GEN_UNLCKDEV = ISP1583_UNLOCK_CODE;
#if 0
logf(" handling int [0x%x & 0x%x = 0x%x]", ISP1583_GEN_INT_READ, ISP1583_INIT_INTEN_READ, ints);
#endif
if(ints & INT_IEBRST) /* Bus reset */
{
logf("BRESET");
high_speed_mode = false;
bus_reset();
usb_core_bus_reset();
/* Mask bus reset interrupt */
set_int_value(ISP1583_GEN_INT_A, ISP1583_GEN_INT_B, INT_IEBRST);
return;
}
if(ints & INT_IEP0SETUP) /* EP0SETUP interrupt */
{
logf("EP0SETUP");
usb_handle_setup_rx();
}
if(ints & INT_IEHS_STA) /* change from full-speed to high-speed mode -> endpoints need to get reconfigured!! */
{
logf("HS_STA");
high_speed_mode = true;
setup_endpoints();
}
if(ints & INT_EP_MASK) /* Endpoints interrupt */
{
unsigned long ep_event;
unsigned short i = 10;
ep_event = ints & INT_EP_MASK;
while(ep_event)
{
if(i>25)
break;
if(ep_event & (1 << i))
{
logf("EP%d %s interrupt", (i - 10) / 2, i % 2 ? "RX" : "TX");
usb_handle_data_int((i - 10) / 2, i % 2);
ep_event &= ~(1 << i);
}
i++;
}
}
if(ints & INT_IERESM && !(ints & INT_IESUSP)) /* Resume status: status change from suspend to resume (active) */
{
logf("RESM");
}
if(ints & INT_IESUSP && !(ints & INT_IERESM)) /* Suspend status: status change from active to suspend */
{
logf("SUSP");
}
if(ints & INT_IEDMA) /* change in the DMA Interrupt Reason register */
{
logf("DMA");
}
if(ints & INT_IEVBUS) /* transition from LOW to HIGH on VBUS */
{
logf("VBUS");
}
/* Mask all (enabled) interrupts */
set_int_value(ISP1583_GEN_INT_A, ISP1583_GEN_INT_B, ints);
ZVM_SPECIFIC;
}
void usb_drv_set_address(int address)
{
logf("usb_drv_set_address(0x%x)", address);
ISP1583_INIT_ADDRESS = (address & 0x7F) | INIT_ADDRESS_DEVEN;
ZVM_SPECIFIC;
usb_status_ack(0, DIR_TX);
}
int dbg_usb_num_items(void)
{
return 2+NUM_ENDPOINTS*2;
}
char* dbg_usb_item(int selected_item, void *data, char *buffer, size_t buffer_len)
{
if(selected_item < 2)
{
switch(selected_item)
{
case 0:
snprintf(buffer, buffer_len, "USB connected: %s", (usb_drv_connected() ? "Yes" : "No"));
return buffer;
case 1:
snprintf(buffer, buffer_len, "HS mode: %s", (high_speed_mode ? "Yes" : "No"));
return buffer;
}
}
else
{
int n = ep_index((selected_item - 2) / 2, (selected_item - 2) % 2);
if(endpoints[n].enabled == false)
snprintf(buffer, buffer_len, "EP%d[%s]: DISABLED", epidx_n(n), (epidx_dir(n) ? "TX" : "RX"));
else
{
if(epidx_dir(n))
{
if(endpoints[n].out_in_progress)
snprintf(buffer, buffer_len, "EP%d[TX]: TRANSFERRING DATA -> %d bytes/%d bytes", epidx_n(n), (endpoints[n].out_len - endpoints[n].out_ptr), endpoints[n].out_len);
else
snprintf(buffer, buffer_len, "EP%d[TX]: STANDBY", epidx_n(n));
}
else
{
if(endpoints[n].in_buf && !endpoints[n].in_ack)
snprintf(buffer, buffer_len, "EP%d[RX]: RECEIVING DATA -> %d bytes/%d bytes", epidx_n(n), endpoints[n].in_ptr, endpoints[n].in_max_len);
else
snprintf(buffer, buffer_len, "EP%d[RX]: STANDBY", epidx_n(n));
}
}
return buffer;
}
return NULL;
(void)data;
}
void usb_drv_set_test_mode(int mode)
{
logf("usb_drv_set_test_mode(%d)", mode);
switch(mode){
case 0:
ISP1583_GEN_TSTMOD = 0;
/* Power cycle... */
break;
case 1:
ISP1583_GEN_TSTMOD = GEN_TSTMOD_JSTATE;
break;
case 2:
ISP1583_GEN_TSTMOD = GEN_TSTMOD_KSTATE;
break;
case 3:
ISP1583_GEN_TSTMOD = GEN_TSTMOD_SE0_NAK;
break;
case 4:
//REG_PORTSC1 |= PORTSCX_PTC_PACKET;
break;
case 5:
//REG_PORTSC1 |= PORTSCX_PTC_FORCE_EN;
break;
}
}
Reference in a new issue View git blame Copy permalink