Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525
History
Thomas Martitz 2ac962aceb Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25023 a1c6a512-1295-4272-9138-f99709370657
2010-03-04 12:32:12 +00:00
..
sansa-c200v2 Sansa c200v2: enable battery charging 2010-01-17 14:19:31 +00:00
sansa-clip Clip+: LCD display (with FlynDice help) 2010-02-17 18:43:13 +00:00
sansa-clipplus Clip+: greylib 2010-02-22 10:35:51 +00:00
sansa-clipv2 Sansa as3525v2: move SD embryo code to a common dir 2010-01-13 06:44:45 +00:00
sansa-e200v2 Update on even pixel boundaries on the e200v2 for best performance (was forgotten in r24198). 2010-01-26 21:31:53 +00:00
sansa-fuze Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
sansa-fuzev2 Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested. 2010-02-25 13:26:46 +00:00
sansa-m200v4
adc-target.h
app.lds Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it. 2010-03-04 12:32:12 +00:00
ascodec-as3525.c
ascodec-target.h
audio-as3525.c as3525v2: build normal firmware properly (Clipv2/+) 2010-02-22 02:42:58 +00:00
backlight-e200v2-fuze.c
boot.lds Clip+ boots with iram mapped at 0x0, only the clipv2 is different 2010-02-22 05:41:05 +00:00
button-e200v2-fuze.c Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested. 2010-02-25 13:26:46 +00:00
clock-target.h as3525v2: share more of system_init() between the 2 SoCs 2010-02-23 06:59:58 +00:00
dbop-as3525.c Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested. 2010-02-25 13:26:46 +00:00
dbop-as3525.h Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
debug-as3525.c Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2) 2010-01-06 23:41:36 +00:00
debug-target.h
dma-pl081.c
dma-target.h Add DMA line for SSP as used in Clip+ 2010-02-08 08:13:52 +00:00
fmradio-i2c-as3525.c FS#10047 : Clipv2 2009-12-31 19:15:20 +00:00
i2s-as3525.c
kernel-as3525.c
lcd-as-e200v2-fuze.S Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%. 2010-01-08 16:41:36 +00:00
pcm-as3525.c Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error) 2010-01-10 14:24:45 +00:00
power-as3525.c
powermgmt-as3525.c
powermgmt-target.h Make Clip+ bootloader build 2010-02-05 12:40:25 +00:00
sd-as3525.c Sansa AMS: remove "ata" from SD drivers filenames 2010-01-15 14:03:41 +00:00
sd-as3525v2.c sd-as3525v2: Load CID info to cardinfo.cid[] correctly. 2010-02-27 17:07:54 +00:00
system-as3525.c Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested. 2010-02-25 13:26:46 +00:00
system-target.h
timer-as3525.c
usb-as3525.c
usb-drv-as3525.c