rockbox/firmware/export/config/aigoerosq.h
Solomon Peachy 2a471e288c New port: AIGO EROS Q / EROS K
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.

These models are rebadged versions:

 * Hifiwalker H2   (== Q)
 * AGPTek H3       (== K)
 * Surfans F20     (== K)

Other notes:

  * Significant improvements in the shared Hiby-platform launcher/loader
    * SD card can theoretically be hot-swapped now
    * Support external USB mass storage!
  * Some consolidation of Hiby-platform targets
  * Some consolidation of plugin keymaps

Todo/known issues:

 * Keymaps need to be gone over properly
 * Convert to HAVE_SCROLLWHEEL?

Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
2020-10-11 16:37:17 -04:00

132 lines
3.3 KiB
C

/*
* This config file is for the AIGO EROS Q / EROS K (and its clones)
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 113
#define MODEL_NAME "AIGO Eros Q"
/* LCD dimensions */
#define LCD_WIDTH 320
#define LCD_HEIGHT 240
/* sqrt(240^2 + 320^2) / 2.0 = 200 */
#define LCD_DPI 200
#ifndef SIMULATOR
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
#endif
#define HIBY_LINUX
#define HAVE_FPU
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
#define HAVE_LCD_ENABLE
/* Define this if the LCD can shut down */
#define HAVE_LCD_SHUTDOWN
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
#define LCD_DEPTH 32
/* Check that but should not matter */
#define LCD_PIXELFORMAT XRGB8888
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults: the backlight driver
* has levels from 0 to 255. But 0 is off so start at 1.
*/
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 255
#define BRIGHTNESS_STEP 5
#define DEFAULT_BRIGHTNESS_SETTING 70
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a real-time clock */
#define CONFIG_RTC APPLICATION
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000
#define HAVE_HEADPHONE_DETECTION
#define HAVE_LINEOUT_DETECTION
/* KeyPad configuration for plugins */
#define CONFIG_KEYPAD EROSQ_PAD
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
#ifndef SIMULATOR
/* We have usb power and can detect usb but it is handled by Linux */
#define HAVE_USB_POWER
#endif
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Linux controlls charging, we can monitor */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* same dimensions as gigabeats */
#define CONFIG_LCD LCD_INGENIC_LINUX
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Define this to the CPU frequency */
#define CPU_FREQ 108000000
/* No special storage */
#define CONFIG_STORAGE STORAGE_HOSTFS
#define HAVE_STORAGE_FLUSH
/* Battery */
#define BATTERY_TYPES_COUNT 1
/* Audio codec */
#define HAVE_EROSQ_LINUX_CODEC
/* Rockbox has to handle the volume level */
#define HAVE_SW_VOLUME_CONTROL
/* We don't have hardware controls */
#define HAVE_SW_TONE_CONTROLS
/* HW codec is flexible */
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_192
/* Battery */
#define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 2000 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
/* ROLO */
#define BOOTFILE_EXT "erosq"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"