Rafaël Carré 9c774b3849 as3514.c: clean up ... - enhance registers description in header file with respect to the as3543 registers: point which one are present or not in the as3543, which bits change (i didn't detail all registers) - cache less registers, only up to the ones which are written to multiple times - use ascodec_readbytes() to cache all needed registers in a row - separate the as3543 bits from as3514/as3515 in audiohw_preinit() - comment out unused audiohw_set_lineout_vol - some cosmetics git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26174 a1c6a512-1295-4272-9138-f99709370657		2010-05-19 17:30:38 +00:00
..
audio	as3514.c: clean up	2010-05-19 17:30:38 +00:00
rtc	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
tuner	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
ata.c	Do s/SWAP_WORDS/ATA_SWAP_WORDS/ to prevent namespace clashes.	2010-05-17 15:15:38 +00:00
ata_flash.c
ata_mmc.c	Simplify some expressions using the ? operator	2010-01-01 22:47:25 +00:00
button.c	Revert r26055 since it breaks certain Archos targets.	2010-05-15 21:27:22 +00:00
dac.c
dac.h	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
fat.c	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
fmradio.c
generic_i2c.c
i2c.c
isp1362.c
isp1583.c
lcd-1bit-vert.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-2bit-horz.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c	Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.	2010-05-18 12:27:20 +00:00
lcd-16bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-16bit.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
lcd-charcell.c	Fix remaining reds/yellows.	2010-05-14 13:21:40 +00:00
lcd-charset-player.c	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c	M66591 Driver: Correct some comments.	2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
pcf50605.c
pcf50606.c
pcf50635.c
qt1106.c
ramdisk.c
sd.c
serial.c	Simplify some boolean expressions that compare directly against 'true'	2010-01-02 16:03:30 +00:00
sw_i2c.c
synaptics-mep.c	Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.	2010-02-06 19:15:43 +00:00
touchscreen.c
tsc200x.c
tsc2100.c