Michael Sevakis a9c20f5789 Gigabeat S: ... 1) Rework event handling and static registration mechanism. No target- specific code in mc13783 driver. GPIO event driver interfaces more cleanly. 2) Somewhat related - enable thread priority for bootloader which is desireable here (ffs is used for GPIO event enabling anyway and that goes along with priority). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17593 a1c6a512-1295-4272-9138-f99709370657		2008-05-21 08:42:11 +00:00
..
rtc_as3514.c	FS#8898 - Prefix AS3514 registers with AS3514_	2008-04-15 21:33:32 +00:00
rtc_ds1339_ds3231.c
rtc_e8564.c	FS#8273 by Przemyslaw Holubowski - H10 RTC alarm bugfixes	2008-02-14 14:00:59 +00:00
rtc_m41st84w.c
rtc_mc13783.c	Gigabeat S:	2008-05-21 08:42:11 +00:00
rtc_mr100.c	mrobe 100, RTC: some code simplification and include init sequence from OF for reference	2008-02-05 00:10:39 +00:00
rtc_pcf50605.c
rtc_pcf50606.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
rtc_rx5x348ab.c
rtc_s3c2440.c	Fix FS#8138 - Gigabeat clock time is lost at midnight on Saturdays	2007-11-12 11:46:27 +00:00
rtc_tcc77x.c	Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.	2008-05-02 19:12:09 +00:00
rtc_zenvisionm.c	Commit whole Creative Zen Vision:M target tree + all related firmware/	2008-04-24 20:08:28 +00:00