Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/ipod/button-clickwheel.c
Michael Sparmann 7b3c7db486 iPod Nano 2G: Correct clickwheel interrupt handler name, this time consistently. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28807 a1c6a512-1295-4272-9138-f99709370657
2010-12-12 12:40:37 +00:00

455 lines
14 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Daniel Stenberg
*
* iPod driver based on code from the ipodlinux project - http://ipodlinux.org
* Adapted for Rockbox in December 2005
* Original file: linux/arch/armnommu/mach-ipod/keyboard.c
* Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
*
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* Rockbox button functions
*/
#include <stdlib.h>
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "button.h"
#include "kernel.h"
#include "backlight.h"
#include "serial.h"
#include "power.h"
#include "powermgmt.h"
#if defined(IPOD_NANO2G) || defined(IPOD_6G)
#include "pmu-target.h"
#endif
#define WHEEL_FAST_OFF_TIMEOUT 250000 /* timeout for acceleration = 250ms */
#define WHEEL_REPEAT_TIMEOUT 250000 /* timeout for button repeat = 250ms */
#define WHEEL_UNTOUCH_TIMEOUT 150000 /* timeout for untouching wheel = 150ms */
#ifdef CPU_PP
#define CLICKWHEEL_DATA (*(volatile unsigned long*)(0x7000c140))
#elif CONFIG_CPU==S5L8701 || CONFIG_CPU==S5L8702
#define CLICKWHEEL_DATA WHEELRX
#else
#error CPU architecture not supported!
#endif
#define WHEELCLICKS_PER_ROTATION 96 /* wheelclicks per full rotation */
/* This amount of clicks is needed for at least scrolling 1 item. Choose small values
* to have high sensitivity but few precision, choose large values to have less
* sensitivity and good precision. */
#if defined(IPOD_NANO) || defined(IPOD_NANO2G)
#define WHEEL_SENSITIVITY 6 /* iPod nano has smaller wheel, lower sensitivity needed */
#else
#define WHEEL_SENSITIVITY 4 /* default sensitivity */
#endif
int old_wheel_value = -1;
int new_wheel_value = 0;
int repeat = 0;
int wheel_delta = 0;
bool wheel_is_touched = false;
unsigned int accumulated_wheel_delta = 0;
unsigned int wheel_repeat = 0;
unsigned int wheel_velocity = 0;
unsigned long last_wheel_usec = 0;
/* Variable to use for setting button status in interrupt handler */
int int_btn = BUTTON_NONE;
#ifdef HAVE_WHEEL_POSITION
static int wheel_position = -1;
static bool send_events = true;
#endif
#if CONFIG_CPU==S5L8701 || CONFIG_CPU==S5L8702
static struct wakeup button_init_wakeup;
#endif
#ifdef CPU_PP
static void opto_i2c_init(void)
{
DEV_EN |= DEV_OPTO;
DEV_RS |= DEV_OPTO;
udelay(5);
DEV_RS &= ~DEV_OPTO; /* finish reset */
DEV_INIT1 |= INIT_BUTTONS; /* enable buttons (needed for "hold"-detection) */
outl(0xc00a1f00, 0x7000c100);
outl(0x01000000, 0x7000c104);
}
#endif
static inline int ipod_4g_button_read(void)
{
int whl = -1;
int btn = BUTTON_NONE;
#ifdef CPU_PP
if ((inl(0x7000c104) & 0x04000000) != 0)
{
#endif
unsigned status = CLICKWHEEL_DATA;
if ((status & 0x800000ff) == 0x8000001a)
{
if (status & 0x00000100)
btn |= BUTTON_SELECT;
if (status & 0x00000200)
btn |= BUTTON_RIGHT;
if (status & 0x00000400)
btn |= BUTTON_LEFT;
if (status & 0x00000800)
btn |= BUTTON_PLAY;
if (status & 0x00001000)
btn |= BUTTON_MENU;
if (status & 0x40000000)
{
unsigned long usec = USEC_TIMER;
/* Highest wheel = 0x5F, clockwise increases */
new_wheel_value = (status >> 16) & 0x7f;
whl = new_wheel_value;
/* switch on backlight (again), reset power-off timer */
backlight_on();
reset_poweroff_timer();
/* Check whether the scrollwheel was untouched by accident or by will. */
/* This is needed because wheel may be untoched very shortly during rotation */
if ( (!wheel_is_touched) && TIME_AFTER(usec, last_wheel_usec + WHEEL_UNTOUCH_TIMEOUT) )
{
/* wheel has been really untouched -> reset internal variables */
old_wheel_value = -1;
wheel_velocity = 0;
accumulated_wheel_delta = 0;
wheel_repeat = BUTTON_NONE;
}
else
{
/* wheel was shortly untouched by accident -> leave internal variables */
wheel_is_touched = true;
}
if (old_wheel_value >= 0)
{
/* This is for later = BUTTON_SCROLL_TOUCH;*/
wheel_delta = new_wheel_value - old_wheel_value;
unsigned int wheel_keycode = BUTTON_NONE;
/* Taking into account wrapping during transition from highest
* to lowest wheel position and back */
if (wheel_delta < -WHEELCLICKS_PER_ROTATION/2)
wheel_delta += WHEELCLICKS_PER_ROTATION; /* Forward wrapping case */
else if (wheel_delta > WHEELCLICKS_PER_ROTATION/2)
wheel_delta -= WHEELCLICKS_PER_ROTATION; /* Backward wrapping case */
/* Getting direction and wheel_keycode from wheel_delta.
* Need at least some clicks to be sure to avoid haptic fuzziness */
if (wheel_delta >= WHEEL_SENSITIVITY)
wheel_keycode = BUTTON_SCROLL_FWD;
else if (wheel_delta <= -WHEEL_SENSITIVITY)
wheel_keycode = BUTTON_SCROLL_BACK;
else
wheel_keycode = BUTTON_NONE;
if (wheel_keycode != BUTTON_NONE)
{
long v = (usec - last_wheel_usec) & 0x7fffffff;
/* undo signedness */
wheel_delta = (wheel_delta>0) ? wheel_delta : -wheel_delta;
/* add the current wheel_delta */
accumulated_wheel_delta += wheel_delta;
v = v ? (1000000 * wheel_delta) / v : 0; /* clicks/sec = 1000000 * clicks/usec */
v = (v * 360) / WHEELCLICKS_PER_ROTATION; /* conversion to degree/sec */
v = (v<0) ? -v : v; /* undo signedness */
/* some velocity filtering to smooth things out */
wheel_velocity = (15 * wheel_velocity + v) / 16;
/* limit to 24 bit */
wheel_velocity = (wheel_velocity>0xffffff) ? 0xffffff : wheel_velocity;
/* assume REPEAT = off */
repeat = 0;
/* direction reversals must nullify acceleration and accumulator */
if (wheel_keycode != wheel_repeat)
{
wheel_repeat = wheel_keycode;
wheel_velocity = 0;
accumulated_wheel_delta = 0;
}
/* on same direction REPEAT is assumed when new click is within timeout */
else if (TIME_BEFORE(usec, last_wheel_usec + WHEEL_REPEAT_TIMEOUT))
{
repeat = BUTTON_REPEAT;
}
/* timeout nullifies acceleration and accumulator */
if (TIME_AFTER(usec, last_wheel_usec + WHEEL_FAST_OFF_TIMEOUT))
{
wheel_velocity = 0;
accumulated_wheel_delta = 0;
}
#ifdef HAVE_WHEEL_POSITION
if (send_events)
#endif
/* The queue should have no other events when scrolling */
if (queue_empty(&button_queue))
{
/* each WHEEL_SENSITIVITY clicks = scrolling 1 item */
accumulated_wheel_delta /= WHEEL_SENSITIVITY;
#ifdef HAVE_SCROLLWHEEL
/* use data-format for HAVE_SCROLLWHEEL */
/* always use acceleration mode (1<<31) */
/* always set message post count to (1<<24) for iPod */
/* this way the scrolling is always calculated from wheel_velocity */
queue_post(&button_queue, wheel_keycode | repeat,
(1<<31) | (1 << 24) | wheel_velocity);
#else
queue_post(&button_queue, wheel_keycode | repeat,
(accumulated_wheel_delta << 16) | new_wheel_value);
#endif
accumulated_wheel_delta = 0;
}
last_wheel_usec = usec;
old_wheel_value = new_wheel_value;
}
}
else
{
/* scrollwheel was touched for the first time after finger lifting */
old_wheel_value = new_wheel_value;
wheel_is_touched = true;
}
}
else
{
/* In this case the finger was lifted from the scrollwheel. */
wheel_is_touched = false;
}
}
#if CONFIG_CPU==S5L8701 || CONFIG_CPU==S5L8702
else if ((status & 0x8000FFFF) == 0x8000023A)
{
if (status & 0x00010000)
btn |= BUTTON_SELECT;
if (status & 0x00020000)
btn |= BUTTON_RIGHT;
if (status & 0x00040000)
btn |= BUTTON_LEFT;
if (status & 0x00080000)
btn |= BUTTON_PLAY;
if (status & 0x00100000)
btn |= BUTTON_MENU;
wakeup_signal(&button_init_wakeup);
}
#endif
#ifdef CPU_PP
}
#endif
#ifdef HAVE_WHEEL_POSITION
/* Save the new absolute wheel position */
wheel_position = whl;
#endif
return btn;
}
#ifdef HAVE_WHEEL_POSITION
int wheel_status(void)
{
return wheel_position;
}
void wheel_send_events(bool send)
{
send_events = send;
}
#endif
#ifdef CPU_PP
void ipod_4g_button_int(void)
{
CPU_HI_INT_DIS = I2C_MASK;
/* The following delay was 250 in the ipodlinux source, but 50 seems to
work fine - tested on Nano, Color/Photo and Video. */
udelay(50);
int_btn = ipod_4g_button_read();
outl(inl(0x7000c104) | 0x0c000000, 0x7000c104);
outl(0x400a1f00, 0x7000c100);
CPU_HI_INT_EN = I2C_MASK;
}
void button_init_device(void)
{
opto_i2c_init();
/* hold button - enable as input */
GPIOA_ENABLE |= 0x20;
GPIOA_OUTPUT_EN &= ~0x20;
/* unmask interrupt */
CPU_INT_EN = HI_MASK;
CPU_HI_INT_EN = I2C_MASK;
}
bool button_hold(void)
{
return (GPIOA_INPUT_VAL & 0x20)?false:true;
}
bool headphones_inserted(void)
{
return (GPIOA_INPUT_VAL & 0x80)?true:false;
}
#else
void INT_WHEEL(void)
{
int clickwheel_events = WHEELINT;
/* Clear interrupts */
if (clickwheel_events & 4) WHEELINT = 4;
if (clickwheel_events & 2) WHEELINT = 2;
if (clickwheel_events & 1) WHEELINT = 1;
int_btn = ipod_4g_button_read();
}
void s5l_clickwheel_init(void)
{
#if CONFIG_CPU==S5L8701
PWRCONEXT &= ~1;
PCON15 = (PCON15 & ~0xFFFF0000) | 0x22220000;
PUNK15 = 0xF0;
WHEEL08 = 0x3A980;
WHEEL00 = 0x280000;
WHEEL10 = 3;
PCON10 = (PCON10 & ~0xFF0) | 0x10;
PDAT10 |= 2;
WHEELTX = 0x8000023A;
WHEEL04 |= 1;
PDAT10 &= ~2;
#elif CONFIG_CPU==S5L8702
//TODO: Implement
#endif
}
void button_init_device(void)
{
wakeup_init(&button_init_wakeup);
#if CONFIG_CPU==S5L8701
INTMSK |= (1<<26);
#elif CONFIG_CPU==S5L8702
//TODO: Implement
#endif
s5l_clickwheel_init();
wakeup_wait(&button_init_wakeup, HZ / 10);
}
bool button_hold(void)
{
#if CONFIG_CPU==S5L8701
return ((PDAT14 & (1 << 6)) == 0);
#elif CONFIG_CPU==S5L8702
//TODO: Implement
return false;
#endif
}
bool headphones_inserted(void)
{
#if CONFIG_CPU==S5L8701
return ((PDAT14 & (1 << 5)) == 0);
#elif CONFIG_CPU==S5L8702
//TODO: Implement
return false;
#endif
}
#endif
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
static bool hold_button = false;
bool hold_button_old;
/* normal buttons */
hold_button_old = hold_button;
hold_button = button_hold();
if (hold_button != hold_button_old)
{
#ifndef BOOTLOADER
backlight_hold_changed(hold_button);
#endif
if (hold_button)
{
#ifdef CPU_PP
/* lock -> disable wheel sensor */
DEV_EN &= ~DEV_OPTO;
#elif CONFIG_CPU==S5L8701
pmu_ldo_power_off(1); /* disable clickwheel power supply */
WHEEL00 = 0;
WHEEL10 = 0;
PWRCONEXT |= 1;
#elif CONFIG_CPU==S5L8702
//TODO: Implement
#endif
}
else
{
#ifdef CPU_PP
/* unlock -> enable wheel sensor */
DEV_EN |= DEV_OPTO;
opto_i2c_init();
#elif CONFIG_CPU==S5L8701
pmu_ldo_power_on(1); /* enable clickwheel power supply */
s5l_clickwheel_init();
#elif CONFIG_CPU==S5L8702
//TODO: Implement
#endif
}
}
/* The int_btn variable is set in the button interrupt handler */
#ifdef IPOD_ACCESSORY_PROTOCOL
return int_btn | remote_control_rx();
#else
return int_btn;
#endif
}
Reference in a new issue View git blame Copy permalink