Michael Sevakis d164678738 Gigabeat S: The forced shutoff voltage level can be lowered a tiny bit it seems. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27170 a1c6a512-1295-4272-9138-f99709370657		2010-06-29 07:29:42 +00:00
..
adc-gigabeat-s.c	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
adc-target.h
audio-gigabeat-s.c	Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too.	2010-05-26 05:13:45 +00:00
backlight-gigabeat-s.c	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
backlight-target.h
button-gigabeat-s.c
button-target.h
dvfs_dptc_tables-target.h	Changed a macro to a raw in int constant. Didn't mean to do that. Put it back right.	2010-05-06 03:30:59 +00:00
fmradio-i2c-gigabeat-s.c
gpio-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
gpio-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
headphone-gigabeat-s.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
i2s-gigabeat-s.c
kernel-gigabeat-s.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
lcd-gigabeat-s.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
lcd-target.h
mc13783-gigabeat-s.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
mc13783-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
pcm-gigabeat-s.c	Gigabeat S: Use statically initialized channel descriptors. Also, there's no need for them to be in non-cached memory since they're only used on the AP side.	2010-06-24 08:40:05 +00:00
power-gigabeat-s.c	New USB charging system, part 1 - API rework and user-visible setting update	2010-06-05 10:05:27 +00:00
power-gigabeat-s.h
powermgmt-gigabeat-s.c	Gigabeat S: The forced shutoff voltage level can be lowered a tiny bit it seems.	2010-06-29 07:29:42 +00:00
powermgmt-target.h	Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon.	2010-05-19 23:39:59 +00:00
system-gigabeat-s.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
system-target.h
timer-gigabeat-s.c
usb-gigabeat-s.c
usb-target.h
wmcodec-gigabeat-s.c