rockbox/firmware/target/sh/archos/ondio/button-ondio.c
Linus Nielsen Feltzing e2022a26d0 Removed executable flag
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
2007-01-09 23:29:07 +00:00

65 lines
1.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Jens Arnold
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "button.h"
#include "backlight.h"
#include "adc.h"
/*
Ondio hardware button hookup
============================
LEFT, RIGHT, UP, DOWN: connected to AN4 through a resistor network
The voltage on AN4 depends on which keys (or key combo) is pressed
OPTION: AN2, high active (assigned as MENU)
ON/OFF: AN3, low active (assigned as OFF)
*/
int button_read_device(void)
{
int btn = BUTTON_NONE;
int data;
/* Check the 4 direction keys */
data = adc_read(ADC_BUTTON_ROW1);
if (data >= 165)
{
if (data >= 585)
if (data >= 755)
btn = BUTTON_LEFT;
else
btn = BUTTON_RIGHT;
else
if (data >= 415)
btn = BUTTON_UP;
else
btn = BUTTON_DOWN;
}
if(adc_read(ADC_BUTTON_OPTION) > 0x200) /* active high */
btn |= BUTTON_MENU;
if(adc_read(ADC_BUTTON_ONOFF) < 0x120) /* active low */
btn |= BUTTON_OFF;
return btn;
}