Nicolas Pennequin c2ca8c710c * Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though. ... * Make the main binary compile. To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657		2007-11-27 15:40:29 +00:00
..
common.c	Sansa C200 bootloader works fine, no need to be verbose anymore	2007-09-20 12:11:04 +00:00
common.h	In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format.	2007-03-16 14:28:00 +00:00
FILES	Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano.	2005-11-08 00:52:39 +00:00
gigabeat-s.c	* Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though.	2007-11-27 15:40:29 +00:00
gigabeat.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
iaudio_x5.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
ipod.c	Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init().	2007-11-21 21:28:46 +00:00
iriver_h300.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
main-e200r-installer.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
main-pp.c	Red fix: USB power check implemented in driver instead	2007-11-22 22:17:45 +00:00
main.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
Makefile	Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.	2007-09-09 11:20:20 +00:00
mrobe500.c	Show some more registers in the debug screen, fix the touchscreen when SCREEN_ROTATE is set.	2007-11-11 03:31:24 +00:00
SOURCES	Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.	2007-10-28 11:08:10 +00:00
telechips.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
tpj1022.c	FS#6554 - Move bootloader code into a common file	2007-02-22 15:09:49 +00:00