rockbox/firmware/export/config-ipodvideo.h
Peter D'Hoye 7ade14776f Correction for ipod video and nano battery type. FS #7216 by Andree Buschmann
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13885 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 14:46:52 +00:00

166 lines
5 KiB
C

/*
* This config file is for the Apple iPod Video
*/
#define TARGET_TREE /* this target is using the target tree system */
#define IPOD_ARCH 1
/* For Rolo and boot loader */
#define MODEL_NUMBER 5
/* For battery type (30GB by default, undefine here to use 60/80GB model) */
#define CONFIG_BATTERY_IPOD_VIDEO_30GB
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_44)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 320
#define LCD_HEIGHT 240
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#define CONFIG_KEYPAD IPOD_4G_PAD
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50605
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8758 audio codec */
#define HAVE_WM8758
#define AB_REPEAT_ENABLE 1
#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* We can fade the backlight by using PWM */
#define HAVE_BACKLIGHT_PWM_FADING
#ifndef SIMULATOR
/* Define this if you have a PortalPlayer PP5022 */
#define CONFIG_CPU PP5022
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* Type of mobile power */
#if (MEM==32) /* this is the 30GB-model */
# define CONFIG_BATTERY BATT_LIION400
# define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity for the 30GB model */
# define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
# define BATTERY_CAPACITY_MAX 800 /* max. capacity selectable */
# define BATTERY_CAPACITY_INC 50 /* capacity increment */
# define BATTERY_TYPES_COUNT 1 /* only one type */
# define BATTERY_SCALE_FACTOR 5865
#else /* these are the 60/80GB-models */
# define CONFIG_BATTERY BATT_LIION400 /* FIXME: we assume to have same discharge behaviour as 30GB iPOD */
# define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity for the 60/80GB model */
# define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
# define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */
# define BATTERY_CAPACITY_INC 50 /* capacity increment */
# define BATTERY_TYPES_COUNT 1 /* only one type */
# define BATTERY_SCALE_FACTOR 5865
#endif
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the hardware can be powered off while charging */
//#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
#define CONFIG_LCD LCD_IPODVIDEO
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define USB_IPODSTYLE
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION
/* Define this if you can read an absolute wheel position */
#define HAVE_WHEEL_POSITION
/* define this if the device has larger sectors when accessed via USB */
/* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
#define MAX_LOG_SECTOR_SIZE 2048
/* define this if the hard drive uses large physical sectors (ATA-7 feature) */
/* and doesn't handle them in the drive firmware */
#define MAX_PHYS_SECTOR_SIZE 1024
#define BOOTFILE_EXT "ipod"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#endif