df0dc2262e
* Fix failed compile of enc_config.c when HAVE_MPEG2_SAMPR is not defined. * Fix bug in AIFF encoder header creation on little endian targets. * Add recording screen keymaps for H10 and iPod. * Move pcm_playback PP specific code to target tree. * Add recording code to wmcodec drivers. * Add pcm_record code. Some problems still remain: * Playback doesn't work after recording until Rockbox is restarted. * Gain control not implemented. * Only 16-bit/44KHz for now. The hardware should be capable of up to 24-bit/96KHz. * Line-in recording not tested on H10. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11794 a1c6a512-1295-4272-9138-f99709370657
158 lines
4.3 KiB
C
158 lines
4.3 KiB
C
/*
|
|
* This config file is for the iriver H10 20Gb
|
|
*/
|
|
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 13
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING 1
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP 1
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR 1
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD IRIVER_H10_PAD
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
#define CONFIG_RTC RTC_E8564
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have the WM8975 audio codec */
|
|
#define HAVE_WM8731
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* FM Tuner */
|
|
/*#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768 *//* TODO: what is this? */
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define CONFIG_BACKLIGHT BL_H10 /* TODO: figure this out, probably not necessary
|
|
because of 'target' stuff */
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* Type of mobile power */
|
|
#define CONFIG_BATTERY BATT_LPCS355385
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
#define BATTERY_SCALE_FACTOR 4688
|
|
|
|
/* Hardware controlled charging */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 75000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_H10_20GB
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 30
|
|
#define DEFAULT_CONTRAST_SETTING 14 /* Match boot contrast */
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
* should be defined as well.
|
|
* We can currently put the lcd to sleep but it won't wake up properly */
|
|
#define HAVE_LCD_SLEEP
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file length */
|
|
#define FIRMWARE_OFFSET_FILE_LENGTH 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* #define USB_IPODSTYLE */
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/*#define HAVE_ADJUSTABLE_CPU_FREQ*/
|
|
|
|
#define BOOTFILE_EXT "h10"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#endif
|