Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/tms320dm320/system-dm320.c
Karl Kurbjun d8c7285b2a M:Robe 500: Commit some minor changes and some keymap changes (short press power takes you out of the WPS) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20942 a1c6a512-1295-4272-9138-f99709370657
2009-05-15 13:43:30 +00:00

310 lines
9.7 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Karl Kurbjun
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "cpu.h"
#include "mmu-arm.h"
#include "kernel.h"
#include "system.h"
#include "panic.h"
#include "uart-target.h"
#include "system-arm.h"
#include "spi.h"
#ifdef CREATIVE_ZVx
#include "dma-target.h"
#endif
#define default_interrupt(name) \
extern __attribute__((weak,alias("UIRQ"))) void name (void)
void irq_handler(void) __attribute__((interrupt ("IRQ"), naked));
void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked));
default_interrupt(TIMER0);
default_interrupt(TIMER1);
default_interrupt(TIMER2);
default_interrupt(TIMER3);
default_interrupt(CCD_VD0);
default_interrupt(CCD_VD1);
default_interrupt(CCD_WEN);
default_interrupt(VENC);
default_interrupt(SERIAL0);
default_interrupt(SERIAL1);
default_interrupt(EXT_HOST);
default_interrupt(DSPHINT);
default_interrupt(UART0);
default_interrupt(UART1);
default_interrupt(USB_DMA);
default_interrupt(USB_CORE);
default_interrupt(VLYNQ);
default_interrupt(MTC0);
default_interrupt(MTC1);
default_interrupt(SD_MMC);
default_interrupt(SDIO_MS);
default_interrupt(GIO0);
default_interrupt(GIO1);
default_interrupt(GIO2);
default_interrupt(GIO3);
default_interrupt(GIO4);
default_interrupt(GIO5);
default_interrupt(GIO6);
default_interrupt(GIO7);
default_interrupt(GIO8);
default_interrupt(GIO9);
default_interrupt(GIO10);
default_interrupt(GIO11);
default_interrupt(GIO12);
default_interrupt(GIO13);
default_interrupt(GIO14);
default_interrupt(GIO15);
default_interrupt(PREVIEW0);
default_interrupt(PREVIEW1);
default_interrupt(WATCHDOG);
default_interrupt(I2C);
default_interrupt(CLKC);
default_interrupt(ICE);
default_interrupt(ARMCOM_RX);
default_interrupt(ARMCOM_TX);
default_interrupt(RESERVED);
/* The entry address is equal to base address plus an offset.
* The offset is based on the priority of the interrupt. So if
* the priority of an interrupt is changed, the user should also
* change the offset for the interrupt in the entry table.
*/
static const unsigned short const irqpriority[] =
{
IRQ_TIMER0,IRQ_TIMER1,IRQ_TIMER2,IRQ_TIMER3,IRQ_CCD_VD0,IRQ_CCD_VD1,
IRQ_CCD_WEN,IRQ_VENC,IRQ_SERIAL0,IRQ_SERIAL1,IRQ_EXT_HOST,IRQ_DSPHINT,
IRQ_UART0,IRQ_UART1,IRQ_USB_DMA,IRQ_USB_CORE,IRQ_VLYNQ,IRQ_MTC0,IRQ_MTC1,
IRQ_SD_MMC,IRQ_SDIO_MS,IRQ_GIO0,IRQ_GIO1,IRQ_GIO2,IRQ_GIO3,IRQ_GIO4,IRQ_GIO5,
IRQ_GIO6,IRQ_GIO7,IRQ_GIO8,IRQ_GIO9,IRQ_GIO10,IRQ_GIO11,IRQ_GIO12,IRQ_GIO13,
IRQ_GIO14,IRQ_GIO15,IRQ_PREVIEW0,IRQ_PREVIEW1,IRQ_WATCHDOG,IRQ_I2C,IRQ_CLKC,
IRQ_ICE,IRQ_ARMCOM_RX,IRQ_ARMCOM_TX,IRQ_RESERVED
}; /* IRQ priorities, ranging from highest to lowest */
static void (* const irqvector[])(void) =
{
TIMER0,TIMER1,TIMER2,TIMER3,CCD_VD0,CCD_VD1,
CCD_WEN,VENC,SERIAL0,SERIAL1,EXT_HOST,DSPHINT,
UART0,UART1,USB_DMA,USB_CORE,VLYNQ,MTC0,MTC1,
SD_MMC,SDIO_MS,GIO0,GIO1,GIO2,GIO3,GIO4,GIO5,
GIO6,GIO7,GIO8,GIO9,GIO10,GIO11,GIO12,GIO13,
GIO14,GIO15,PREVIEW0,PREVIEW1,WATCHDOG,I2C,CLKC,
ICE,ARMCOM_RX,ARMCOM_TX,RESERVED
};
static const char * const irqname[] =
{
"TIMER0","TIMER1","TIMER2","TIMER3","CCD_VD0","CCD_VD1",
"CCD_WEN","VENC","SERIAL0","SERIAL1","EXT_HOST","DSPHINT",
"UART0","UART1","USB_DMA","USB_CORE","VLYNQ","MTC0","MTC1",
"SD_MMC","SDIO_MS","GIO0","GIO1","GIO2","GIO3","GIO4","GIO5",
"GIO6","GIO7","GIO8","GIO9","GIO10","GIO11","GIO12","GIO13",
"GIO14","GIO15","PREVIEW0","PREVIEW1","WATCHDOG","I2C","CLKC",
"ICE","ARMCOM_RX","ARMCOM_TX","RESERVED"
};
static void UIRQ(void)
{
unsigned int offset = (IO_INTC_IRQENTRY0>>2)-1;
panicf("Unhandled IRQ %02X: %s", offset, irqname[offset]);
}
void irq_handler(void)
{
/*
* Based on: linux/arch/arm/kernel/entry-armv.S and system-meg-fx.c
*/
asm volatile( "stmfd sp!, {r0-r7, ip, lr} \n" /* Store context */
"sub sp, sp, #8 \n"); /* Reserve stack */
unsigned short addr = IO_INTC_IRQENTRY0>>2;
if(addr != 0)
{
addr--;
irqvector[addr]();
}
asm volatile( "add sp, sp, #8 \n" /* Cleanup stack */
"ldmfd sp!, {r0-r7, ip, lr} \n" /* Restore context */
"subs pc, lr, #4 \n"); /* Return from IRQ */
}
void fiq_handler(void)
{
/*
* Based on: linux/arch/arm/kernel/entry-armv.S and system-meg-fx.c
*/
asm volatile (
"sub lr, lr, #4 \r\n"
"stmfd sp!, {r0-r3, ip, lr} \r\n"
"mov r0, #0x00030000 \r\n"
"ldr r0, [r0, #0x510] \r\n" /* Fetch value from IO_INTC_FIQENTRY0 */
"sub r0, r0, #1 \r\n"
"ldr r1, =irqvector \r\n"
"ldr r1, [r1, r0, lsl #2] \r\n" /* Divide value by 4 (TBA0/TBA1 is set to 0) and load appropriate pointer from the vector list */
"blx r1 \r\n" /* Jump to handler */
"ldmfd sp!, {r0-r3, ip, pc}^ \r\n" /* Return from FIQ */
);
}
void system_reboot(void)
{
/* Code taken from linux/include/asm-arm/arch-itdm320-20/system.h at NeuroSVN */
__asm__ __volatile__(
"mov ip, #0 \n"
"mcr p15, 0, ip, c7, c7, 0 @ invalidate cache \n"
"mcr p15, 0, ip, c7, c10,4 @ drain WB \n"
"mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) \n"
"mrc p15, 0, ip, c1, c0, 0 @ get ctrl register\n"
"bic ip, ip, #0x000f @ ............wcam \n"
"bic ip, ip, #0x2100 @ ..v....s........ \n"
"mcr p15, 0, ip, c1, c0, 0 @ ctrl register \n"
"mov ip, #0xFF000000 \n"
"orr pc, ip, #0xFF0000 @ ip = 0xFFFF0000 \n"
:
:
: "cc"
);
}
void system_exception_wait(void)
{
/* Mask all Interrupts. */
IO_INTC_EINT0 = 0;
IO_INTC_EINT1 = 0;
IO_INTC_EINT2 = 0;
while ((IO_GIO_BITSET0&0x01) != 0); /* Wait for power button */
}
void system_init(void)
{
/* taken from linux/arch/arm/mach-itdm320-20/irq.c */
/* Clearing all FIQs and IRQs. */
IO_INTC_IRQ0 = 0xFFFF;
IO_INTC_IRQ1 = 0xFFFF;
IO_INTC_IRQ2 = 0xFFFF;
IO_INTC_FIQ0 = 0xFFFF;
IO_INTC_FIQ1 = 0xFFFF;
IO_INTC_FIQ2 = 0xFFFF;
/* Masking all Interrupts. */
IO_INTC_EINT0 = 0;
IO_INTC_EINT1 = 0;
IO_INTC_EINT2 = 0;
/* Setting INTC to all IRQs. */
IO_INTC_FISEL0 = 0;
IO_INTC_FISEL1 = 0;
IO_INTC_FISEL2 = 0;
/* setup the clocks */
IO_CLK_DIV0=0x0003;
IO_CLK_DIV1=0x0102;
IO_CLK_DIV2=0x021F;
IO_CLK_DIV3=0x1FFF;
IO_CLK_DIV4=0x1F00;
IO_CLK_PLLA=0x80A0;
IO_CLK_PLLB=0x80C0;
IO_CLK_SEL0=0x017E;
IO_CLK_SEL1=0x1000;
IO_CLK_SEL2=0x1001;
/* need to wait before bypassing */
IO_CLK_BYP=0x0000;
/* turn off some unneeded modules */
IO_CLK_MOD0 &= ~0x0018;
IO_CLK_MOD1 = 0x0918;
IO_CLK_MOD2 = ~0x7C58;
/* IRQENTRY only reflects enabled interrupts */
IO_INTC_RAW = 0;
IO_INTC_ENTRY_TBA0 = 0;
IO_INTC_ENTRY_TBA1 = 0;
int i;
/* Set interrupt priorities to predefined values */
for(i = 0; i < 23; i++)
DM320_REG(0x0540+i*2) = ((irqpriority[i*2+1] & 0x3F) << 8) | (irqpriority[i*2] & 0x3F); /* IO_INTC_PRIORITYx */
/* Turn off all timers */
IO_TIMER0_TMMD = CONFIG_TIMER0_TMMD_STOP;
IO_TIMER1_TMMD = CONFIG_TIMER1_TMMD_STOP;
IO_TIMER2_TMMD = CONFIG_TIMER2_TMMD_STOP;
IO_TIMER3_TMMD = CONFIG_TIMER3_TMMD_STOP;
#ifndef CREATIVE_ZVx
/* set GIO26 (reset pin) to output and low */
IO_GIO_BITCLR1=(1<<10);
IO_GIO_DIR1&=~(1<<10);
#endif
uart_init();
spi_init();
#ifdef CREATIVE_ZVx
dma_init();
#endif
/* MMU initialization (Starts data and instruction cache) */
ttb_init();
/* Make sure everything is mapped on itself */
map_section(0, 0, 0x1000, CACHE_NONE);
/* Enable caching for RAM */
map_section(CONFIG_SDRAM_START, CONFIG_SDRAM_START, MEM, CACHE_ALL);
/* enable buffered writing for the framebuffer */
map_section((int)FRAME, (int)FRAME, 1, BUFFERED);
#ifdef CREATIVE_ZVx
/* mimic OF */
map_section(0x00100000, 0x00100000, 4, CACHE_NONE);
map_section(0x04700000, 0x04700000, 2, BUFFERED);
map_section(0x40000000, 0x40000000, 16, CACHE_NONE);
map_section(0x50000000, 0x50000000, 16, CACHE_NONE);
map_section(0x60000000, 0x60000000, 16, CACHE_NONE);
map_section(0x80000000, 0x80000000, 1, CACHE_NONE);
#endif
enable_mmu();
}
int system_memory_guard(int newmode)
{
(void)newmode;
return 0;
}
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
void set_cpu_frequency(long frequency)
{
if (frequency == CPUFREQ_MAX) {
IO_CLK_DIV0 = 0x0101; /* 175 MHz ARM */
} else {
IO_CLK_DIV0 = 0x0003; /* 87.5 MHz ARM - not much savings, about 3 mA */
}
}
#endif
Reference in a new issue View git blame Copy permalink