| .. |
|
common
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
|
2008-03-25 02:34:12 +00:00 |
|
decompressor
|
Removed executable flag
|
2007-01-09 23:29:07 +00:00 |
|
drivers
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
export
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
include
|
FS#7598 - Dircache support for multivolume targets (by Phil Light).
|
2008-03-11 19:39:26 +00:00 |
|
target
|
e200: Get the UNCACHED_ADDR macro and phys_fb_address use out of the lcd driver.
|
2008-04-06 05:08:39 +00:00 |
|
test
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
|
usbstack
|
Clean up the way empty transfers are sent in error cases.
|
2008-04-01 20:36:51 +00:00 |
|
arabjoin.c
|
|
|
|
arabjoin.h
|
|
|
|
ata_idle_notify.c
|
It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.
|
2008-03-17 05:22:53 +00:00 |
|
backlight.c
|
1st/2nd Gen: Make backlight inversion adaption in the greyscale library work again. is_backlight_on() can now be called from COP.
|
2008-04-06 15:15:44 +00:00 |
|
bidi.c
|
code police, no functional changes
|
2007-07-30 22:33:31 +00:00 |
|
buffer.c
|
New scheduler, with priorities for swcodec platforms. Frequent task
|
2006-09-16 16:18:11 +00:00 |
|
COPYING
|
|
|
|
debug.c
|
Fix SH1 debug builds.
|
2007-03-02 20:03:41 +00:00 |
|
eeprom_settings.c
|
Prepare core support for the iriver bootloader supporting ROM images
|
2007-01-12 18:34:00 +00:00 |
|
enc_base.c
|
Recording: Add AIFF recording to SWCODEC. Note: AIFF playback chokes on sample rates other than 44.1kHz whether recorded or created and saved with an external program. Recorded files will still open in an external editor however.
|
2006-11-24 19:49:04 +00:00 |
|
events.c
|
It makes more sense for the callback registrar to decide if its a "oneshot" then the callback caller.
|
2008-03-17 05:22:53 +00:00 |
|
font.c
|
Fix 64 bit simulator warning.
|
2007-10-02 17:04:56 +00:00 |
|
font_cache.c
|
|
|
|
general.c
|
mpegplayer: Make playback engine fully seekable and frame-accurate and split into logical parts. Be sure to have all current features work. Actual UI for seeking will be added soon. Recommended GOP size is about 15-30 frames depending on target or seeking can be slow with really long GOPs (nature of MPEG video). More refined encoding recommendations for a particular player should be posted soon.
|
2007-12-29 19:46:35 +00:00 |
|
hangul.c
|
Add support for loadable vkeyboard layouts
|
2006-03-29 16:21:42 +00:00 |
|
hotswap.c
|
Hotswap code shuffling: Fix yellow. Simplify some target function access. Keep fat lock access from compiling for Ondios - think of a nicer way later.
|
2008-03-12 11:08:41 +00:00 |
|
id3.c
|
Revert... stupid svn doesn't complain when passing -m twice :(
|
2008-04-02 22:45:23 +00:00 |
|
ifp_usb_serial.c
|
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
|
2008-03-02 18:16:24 +00:00 |
|
kernel.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
logf.c
|
implement logf over usb-serial. Needs USB_SERIAL defined in usb_core.h to work, and needs to be enabled in the debug menu.
|
2008-03-02 20:45:33 +00:00 |
|
lru.c
|
|
|
|
Makefile
|
Prevent sysfont.h being regenerated during every build.
|
2007-01-18 00:46:52 +00:00 |
|
mp3_playback.c
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
|
mp3data.c
|
Fix simulator builds, and some debugf() format strings.
|
2007-03-17 09:54:28 +00:00 |
|
mpeg.c
|
Revert my earlier const madness, we'll keep the parameter lists simple.
|
2008-03-28 12:51:33 +00:00 |
|
panic.c
|
iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().
|
2008-03-17 00:19:23 +00:00 |
|
pcm.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
pcm_record.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
pcm_sampr.c
|
Forgot to use cvs add on a few new files in the fresh checkout I used. woops.
|
2006-11-06 18:18:05 +00:00 |
|
powermgmt.c
|
m:robe 100 - remove ugly workaround for false initial voltage readings and wait until readings have settled instead
|
2008-03-11 09:38:12 +00:00 |
|
profile.c
|
Fix bug in profiling that makes the timing for coldfire off by a factor of 2, and way off for pp.
|
2006-08-29 18:35:18 +00:00 |
|
README
|
|
|
|
replaygain.c
|
Remove some debug code. Remove some unnecessary checks.
|
2007-08-25 10:56:22 +00:00 |
|
rolo.c
|
Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.
|
2008-03-26 23:35:34 +00:00 |
|
rom.lds
|
Fixed the rombox generation for SH1.
|
2007-01-08 19:19:23 +00:00 |
|
scroll_engine.c
|
Add viewport capabilities to all the LCD drivers, and adapt scrolling code. This is the firmware/ part of FS#8385 - the changes to the WPS code still need more work and will be committed at a later date. NOTE: There are no user-visible changes with this commit - just the infrastructure.
|
2008-01-07 20:34:11 +00:00 |
|
sound.c
|
Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS.
|
2008-03-31 22:43:20 +00:00 |
|
SOURCES
|
D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets.
|
2008-04-04 20:55:58 +00:00 |
|
system.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
thread.c
|
Shorten the uncontended (expected) corelock_(try_)lock return path. Squeeze down corelock_try_lock by a couple instructions.
|
2008-04-06 08:48:31 +00:00 |
|
timer.c
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
tuner.c
|
e200: Tuner driver needs to yield alot and also be mutexed. FM debug screen got broken again and was ignoring cancellation and not drawing the lines.
|
2007-07-14 22:00:50 +00:00 |
|
usb.c
|
Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
|
2008-03-26 01:50:41 +00:00 |
94c6e6f337