Michael Sevakis 1f021af60c Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657		2008-02-05 04:43:19 +00:00
..
common.c	Sansa C200 bootloader works fine, no need to be verbose anymore	2007-09-20 12:11:04 +00:00
common.h	In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format.	2007-03-16 14:28:00 +00:00
FILES
gigabeat-s.c	Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders.	2008-02-05 04:43:19 +00:00
gigabeat.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
iaudio_x5.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
ipod.c	Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init().	2007-11-21 21:28:46 +00:00
iriver_h300.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
main-e200r-installer.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
main-pp.c	Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.	2008-01-09 07:24:43 +00:00
main.c	* dont compile audio codec drivers for bootloader, as we dont need them -> saves time	2007-11-20 12:09:59 +00:00
Makefile	Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written.	2007-09-09 11:20:20 +00:00
mrobe500.c	Show some more registers in the debug screen, fix the touchscreen when SCREEN_ROTATE is set.	2007-11-11 03:31:24 +00:00
SOURCES	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
telechips.c	Read ID codes & raw page data from D2 NAND flash (work in progress;	2008-01-25 21:37:59 +00:00
tpj1022.c	FS#6554 - Move bootloader code into a common file	2007-02-22 15:09:49 +00:00