rockbox/firmware/target/mips/ingenic_x1000/dma-x1000.c
Aidan MacDonald 3ec66893e3 New port: FiiO M3K on bare metal
Change-Id: I7517e7d5459e129dcfc9465c6fbd708619888fbe
2021-03-28 00:01:37 +00:00

91 lines
2.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2021 Aidan MacDonald
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "system.h"
#include "dma-x1000.h"
#include "irq-x1000.h"
#include "x1000/cpm.h"
#include "panic.h"
static dma_cb_func dma_callbacks[DMA_NUM_USED_CHANNELS];
static void dma_no_cb(int event)
{
(void)event;
panicf("Unhandled DMA channel interrupt");
}
void dma_init(void)
{
for(int i = 0; i < DMA_NUM_USED_CHANNELS; ++i)
dma_callbacks[i] = dma_no_cb;
jz_writef(CPM_CLKGR, PDMA(0));
jz_writef(DMA_CTRL, ENABLE(1), HALT(0), AR(0));
jz_writef(DMA_CTRL, FMSC(1), FSSI(1), FTSSI(1), FUART(1), FAIC(1));
system_enable_irq(IRQ_PDMA);
system_enable_irq(IRQ_PDMAD);
}
void dma_set_callback(int chn, dma_cb_func cb)
{
dma_callbacks[chn] = cb != NULL ? cb : dma_no_cb;
}
void PDMA(void)
{
/* This is called when the last descriptor completes, or if the
* channel hits an error.
*/
unsigned pending = REG_DMA_IRQP;
for(int i = 0; i < DMA_NUM_USED_CHANNELS; ++i) {
if((pending & (1 << i)) == 0)
continue;
int evt;
if(REG_DMA_CHN_CS(i) & jz_orm(DMA_CHN_CS, AR, HLT))
evt = DMA_EVENT_ERROR;
else
evt = DMA_EVENT_COMPLETE;
REG_DMA_CHN_CS(i) = 0;
dma_callbacks[i](evt);
}
/* Clear any errors and clear interrupts */
jz_writef(DMA_CTRL, HALT(0), AR(0));
REG_DMA_IRQP = 0;
}
void PDMAD(void)
{
/* Called when TIE is set on a non-final descriptor */
unsigned pending = REG_DMA_DIP;
for(int i = 0; i < DMA_NUM_USED_CHANNELS; ++i) {
if((pending & (1 << i)) == 0)
continue;
dma_callbacks[i](DMA_EVENT_INTERRUPT);
}
/* This does not operate like other clear registers */
REG_DMA_DIC &= ~pending;
}