ec43287aa0
Adjust SD timeouts accordingly. Adjust code in debug-as3525.c to display correct frequencies on system/debug/View disk info page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23350 a1c6a512-1295-4272-9138-f99709370657
153 lines
7.4 KiB
C
153 lines
7.4 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright © 2008 Rafaël Carré
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef CLOCK_TARGET_H
|
|
#define CLOCK_TARGET_H
|
|
|
|
/* returns clock divider, given maximal target frequency and clock reference */
|
|
#define CLK_DIV(ref, target) ((ref + target - 1) / target)
|
|
|
|
|
|
/* Frequency and Bus Settings
|
|
* These bus settings work on the assumption that unboosted performance will be
|
|
* based on fastbus mode(FCLK == PCLK) at a frequency configured with this file.
|
|
* Boosted performance defaults to synchronous bus but will be changed to
|
|
* asynchronous bus if FCLK is not an integer multiple of PCLK.
|
|
* The player starts up in fastbus mode and synchronous or asynchronous mode is
|
|
* implemented in the set_cpu_frequency() function in system-as3525.c. There
|
|
* are limitations on both frequencies and frequency relationships listed in 7.3.14
|
|
* of the as3525 datasheet that need to be observed. If you are determined to
|
|
* use a frequency that is not "legal" you can do that. There are no checks for
|
|
* legal frequency values, only some validity checks to make sure the divider
|
|
* value fits into the number of bits allotted to it.
|
|
*
|
|
* The CLOCK_DIV macro does a pretty good job at selecting divider values but
|
|
* you can always override it by choosing your own value and commenting out the
|
|
* macro. AS3525_FCLK_PREDIV values other than 0 allow you to choose frequencies
|
|
* from lines below the main PLL frequency lines. AS3525_FCLK_POSTDIV
|
|
* will be calculated automagically depending on the value you have selected
|
|
* for AS3525_FCLK_FREQ. You may add more PLL frequencies by simply commenting
|
|
* out the current #defines for AS3525_PLLA_FREQ & AS3525_PLLA_SETTING and
|
|
* adding a #define for FREQ and divider setting to produce that frequency.I
|
|
* have included USB & PLLB for future use but commented them out for now.
|
|
*/
|
|
|
|
/* Clock Sources */
|
|
#define AS3525_CLK_MAIN 0
|
|
#define AS3525_CLK_PLLA 1
|
|
//#define AS3525_CLK_PLLB 2
|
|
#define AS3525_CLK_FCLK 3 /* Available as PCLK input only */
|
|
|
|
/** ************ Change these to reconfigure clocking scheme *******************/
|
|
/* PLL frequencies and settings*/
|
|
#define AS3525_PLLA_FREQ 248000000 /*124,82.7,62,49.6,41.3,35.4 */
|
|
/* FCLK_PREDIV-> *7/8 = 217MHz 108.5 ,72.3, 54.25, 43.4, 36.17 */
|
|
/* *6/8 = 186MHz 93, 62, 46.5, 37.2 */
|
|
/* *5/8 = 155MHz 77.5, 51.67, 38.75 */
|
|
#define AS3525_PLLA_SETTING 0x261F
|
|
|
|
//#define AS3525_PLLA_FREQ 384000000 /*192,128,96,76.8,64,54.9,48,42.7,38.4*/
|
|
/* FCLK_PREDIV-> *7/8 = 336MHz 168, 112, 84, 67.2, 56, 48, 42, 37.3*/
|
|
/* *6/8 = 288MHz 144, 96, 72, 57.6, 48, 41.1, */
|
|
/* *5/8 = 240MHz 120, 80, 60, 48, 40 */
|
|
//#define AS3525_PLLA_SETTING 0x2630
|
|
|
|
/* PLLB not used at this time! */
|
|
//#define AS3525_PLLB_FREQ
|
|
//#define AS3525_PLLB_SETTING
|
|
|
|
#define AS3525_FCLK_PREDIV 0 /* div = (8-n)/8 Enter manually & postdiv will be calculated*/
|
|
/* 0 gives you the PLLA 1st line choices, 1 the 2nd line etc. */
|
|
|
|
#define AS3525_FCLK_FREQ 248000000 /* Boosted FCLK frequency */
|
|
#define AS3525_DRAM_FREQ 62000000 /* Initial DRAM frequency */
|
|
/* AS3525_PCLK_FREQ != AS3525_DRAM_FREQ/1 will boot to white lcd screen */
|
|
#define AS3525_PCLK_FREQ AS3525_DRAM_FREQ/1 /* PCLK divided from DRAM freq */
|
|
#define AS3525_DBOP_FREQ AS3525_PCLK_FREQ/1 /* DBOP divided from PCLK freq */
|
|
|
|
/** ****************************************************************************/
|
|
|
|
/* Figure out if we need to use asynchronous bus */
|
|
#if (AS3525_FCLK_FREQ % AS3525_PCLK_FREQ)
|
|
#define ASYNCHRONOUS_BUS /* Boosted mode asynchronous */
|
|
#endif
|
|
|
|
/* Tell the software what frequencies we're running */
|
|
#define CPUFREQ_MAX AS3525_FCLK_FREQ
|
|
#define CPUFREQ_DEFAULT AS3525_PCLK_FREQ
|
|
#define CPUFREQ_NORMAL AS3525_PCLK_FREQ
|
|
|
|
/* FCLK */
|
|
#define AS3525_FCLK_SEL AS3525_CLK_PLLA
|
|
#define AS3525_FCLK_POSTDIV (CLK_DIV((AS3525_PLLA_FREQ*(8-AS3525_FCLK_PREDIV)/8), AS3525_FCLK_FREQ) - 1) /*div=1/(n+1)*/
|
|
|
|
/* PCLK */
|
|
#ifdef ASYNCHRONOUS_BUS
|
|
#define AS3525_PCLK_SEL AS3525_CLK_PLLA /* PLLA input for asynchronous */
|
|
#define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_PLLA_FREQ, AS3525_DRAM_FREQ) - 1)/*div=1/(n+1)*/
|
|
#else
|
|
#define AS3525_PCLK_SEL AS3525_CLK_FCLK /* Fclk input for synchronous */
|
|
#define AS3525_PCLK_DIV0 (CLK_DIV(AS3525_FCLK_FREQ, AS3525_DRAM_FREQ) - 1) /*div=1/(n+1)*/
|
|
#endif
|
|
/*unable to use AS3525_PCLK_DIV1 != 0 successfuly so far*/
|
|
#define AS3525_PCLK_DIV1 (CLK_DIV(AS3525_DRAM_FREQ, AS3525_PCLK_FREQ) - 1)/* div = 1/(n+1)*/
|
|
|
|
/* PCLK as Source */
|
|
#define AS3525_DBOP_DIV (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/
|
|
#define AS3525_I2C_PRESCALER CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)
|
|
#define AS3525_I2C_FREQ 400000
|
|
|
|
/* For now use same divider for ident frequencies on both internal and uSD cards */
|
|
#define AS3525_SD_IDENT_DIV ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1)
|
|
#define AS3525_SD_IDENT_FREQ 400000 /* must be between 100 & 400 kHz */
|
|
|
|
#define AS3525_IDE_SEL AS3525_CLK_PLLA /* Input Source */
|
|
#define AS3525_IDE_DIV (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/
|
|
/* for now use IDECLK == PCLK for consistency */
|
|
#define AS3525_IDE_FREQ AS3525_PCLK_FREQ /* The OF uses 66MHz maximal freq */
|
|
|
|
//#define AS3525_USB_SEL AS3525_CLK_PLLA /* Input Source */
|
|
//#define AS3525_USB_DIV /* div = 1/(n=0?1:2n)*/
|
|
|
|
|
|
/* Validity Checks */
|
|
|
|
/* AS3525_PCLK_FREQ */
|
|
#if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_PCLK_FREQ) - 1) >= (1<<4) /* 4 bits */
|
|
#error PCLK frequency is too low : clock divider will not fit !
|
|
#endif
|
|
/* AS3525_DBOP_FREQ */
|
|
#if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) >= (1<<3) /* 3 bits */
|
|
#error DBOP frequency is too low : clock divider will not fit !
|
|
#endif
|
|
/* AS3525_IDE_FREQ */
|
|
#if (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1) >= (1<<4) /* 4 bits */
|
|
#error IDE frequency is too low : clock divider will not fit !
|
|
#endif
|
|
/* AS3525_I2C_FREQ */
|
|
#if (CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)) >= (1<<10) /* 2+8 bits */
|
|
#error I2C frequency is too low : clock divider will not fit !
|
|
#endif
|
|
/* AS3525_SD_IDENT_FREQ */
|
|
#if ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1) >= (1<<8) /* 8 bits */
|
|
#error SD IDENTIFICATION frequency is too low : clock divider will not fit !
|
|
#endif
|
|
|
|
#endif /* CLOCK_TARGET_H */
|