709827b5ea
The running count is only 16-bit wide, since the always tick setting derives from the crystal clock at 24MHz the user timer cannot be set lower than ~300Hz which is already too high. Switch to the 32KHz crystal source to fix this. Change-Id: Ie7775460b17ea7ab331738734e3d688ad5563857
100 lines
4.1 KiB
C
100 lines
4.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef __IMX233_H__
|
|
#define __IMX233_H__
|
|
|
|
/*
|
|
* Chip Memory Map:
|
|
* 0x00000000 - 0x00007fff: on chip ram
|
|
* 0x40000000 - 0x5fffffff: dram (512Mb max)
|
|
* 0x80000000 - 0x80100000: memory mapped registers
|
|
* We use the following map:
|
|
* 0x60000000 - 0x7fffffff: dram (cached)
|
|
* 0x90000000 - 0xafffffff: dram (buffered)
|
|
* everything else : identity mapped (uncached)
|
|
*
|
|
* As a side note it's important to notice that uncached dram is identity mapped
|
|
*/
|
|
|
|
#define IRAM_ORIG 0
|
|
#define IRAM_SIZE 0x8000
|
|
#define DRAM_ORIG 0x40000000
|
|
#define DRAM_SIZE (MEMORYSIZE * 0x100000)
|
|
|
|
#define UNCACHED_DRAM_ADDR 0x40000000
|
|
#define CACHED_DRAM_ADDR 0x60000000
|
|
#define BUFFERED_DRAM_ADDR 0x90000000
|
|
#define CACHEALIGN_SIZE 32
|
|
|
|
#define NOCACHE_BASE (UNCACHED_DRAM_ADDR - CACHED_DRAM_ADDR)
|
|
|
|
#define PHYSICAL_ADDR(a) \
|
|
((typeof(a))((uintptr_t)(a) >= BUFFERED_DRAM_ADDR ? \
|
|
((uintptr_t)(a) - BUFFERED_DRAM_ADDR + UNCACHED_DRAM_ADDR) \
|
|
:(uintptr_t)(a) >= CACHED_DRAM_ADDR ? \
|
|
((uintptr_t)(a) - CACHED_DRAM_ADDR + UNCACHED_DRAM_ADDR) \
|
|
:(uintptr_t)(a)))
|
|
#define UNCACHED_ADDR(a) PHYSICAL_ADDR(a)
|
|
|
|
#define TTB_BASE_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE)
|
|
#define TTB_SIZE 0x4000
|
|
#define TTB_BASE ((unsigned long *)TTB_BASE_ADDR)
|
|
#define FRAME_SIZE (LCD_WIDTH * LCD_HEIGHT * LCD_DEPTH / 8)
|
|
#define FRAME_PHYS_ADDR (DRAM_ORIG + DRAM_SIZE - TTB_SIZE - FRAME_SIZE)
|
|
#define FRAME ((void *)(FRAME_PHYS_ADDR - UNCACHED_DRAM_ADDR + BUFFERED_DRAM_ADDR))
|
|
|
|
/* Timer runs at 32KHz, derived from clk32k@32KHz */
|
|
#define TIMER_FREQ 32000
|
|
|
|
/* USBOTG */
|
|
#define USB_QHARRAY_ATTR __attribute__((section(".qharray"),nocommon,aligned(2048)))
|
|
#define USB_NUM_ENDPOINTS 5
|
|
#define USB_DEVBSS_ATTR NOCACHEBSS_ATTR
|
|
#define USB_BASE 0x80080000
|
|
/*
|
|
#define QHARRAY_SIZE ((64*USB_NUM_ENDPOINTS*2 + 2047) & (0xffffffff - 2047))
|
|
#define QHARRAY_PHYS_ADDR ((FRAME_PHYS_ADDR - QHARRAY_SIZE) & (0xffffffff - 2047))
|
|
*/
|
|
|
|
#define __REG_SET(reg) (*((volatile uint32_t *)(® + 1)))
|
|
#define __REG_CLR(reg) (*((volatile uint32_t *)(® + 2)))
|
|
#define __REG_TOG(reg) (*((volatile uint32_t *)(® + 3)))
|
|
#define __REG_SET_CLR(reg, set) \
|
|
(*((volatile uint32_t *)(® + (set ? 1 : 2))))
|
|
|
|
#define __BLOCK_SFTRST (1 << 31)
|
|
#define __BLOCK_CLKGATE (1 << 30)
|
|
|
|
/* 32 bytes per cache line */
|
|
#define CACHEALIGN_BITS 5
|
|
|
|
#define ___ENSURE_ZERO(line, x) static uint8_t __ensure_zero_##line[-(x)] __attribute__((unused));
|
|
#define __ENSURE_ZERO(x) ___ENSURE_ZERO(__LINE__, x)
|
|
#define __ENSURE_MULTIPLE(x, y) __ENSURE_ZERO((x) % (y))
|
|
#define __ENSURE_CACHELINE_MULTIPLE(x) __ENSURE_MULTIPLE(x, 1 << CACHEALIGN_BITS)
|
|
#define __ENSURE_STRUCT_CACHE_FRIENDLY(name) __ENSURE_CACHELINE_MULTIPLE(sizeof(name))
|
|
|
|
#define __XTRACT(reg, field) ((reg & reg##__##field##_BM) >> reg##__##field##_BP)
|
|
#define __XTRACT_EX(val, field) (((val) & field##_BM) >> field##_BP)
|
|
#define __FIELD_SET(reg, field, val) reg = (reg & ~reg##__##field##_BM) | (val << reg##__##field##_BP)
|
|
#define __FIELD_SET_CLR(reg, field, set) __REG_SET_CLR(reg, set) = reg##__##field
|
|
|
|
#endif /* __IMX233_H__ */
|