8f4202db28
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29936 a1c6a512-1295-4272-9138-f99709370657
37 lines
1.5 KiB
Text
37 lines
1.5 KiB
Text
This is the collection of small utilities needed to hack Rockchip rk27xx
|
|
series based DAPs. This tools were tested on linux only.
|
|
|
|
|
|
rk27load
|
|
This directory contains tool which can send arbitrary image(s) to the device
|
|
in rockchip recovery mode (VID:PID 0x071B:0x3201).
|
|
|
|
The first image can not exceed 510 bytes (+2 bytes checksum) and entry
|
|
point is 0x18020e00. Usually this code is used to configure SDRAM controller.
|
|
One can use first stage image extracted from Rock27Boot.bin file (a bit
|
|
more sofisticated) or the one provided in rk27load/stage1 directory.
|
|
|
|
The second image is loaded at the begining of the dram (0x60000000)
|
|
and executed. For some reason (which is still unclear) the size of
|
|
2nd stage image is limited to about 3-4 kB.
|
|
|
|
You can find example of custom 2nd stage image in rk27load/stage2 directory.
|
|
The purpose of this image is to configure bulk transfer and allow to
|
|
load usercode without size restriction mentioned above (the max size
|
|
is 8MB actually). The entry point of usercode is 0x60000000.
|
|
|
|
You need libusb 1.0 + header files in order to compile this utility.
|
|
You need working arm-eabi crosscompiler in order to compile stage1/stage2
|
|
bootloader binaries (but You should have one already if You tinker whith this)
|
|
|
|
|
|
rkboottool
|
|
This directory contains tool which allows to extract (and decrypt) images
|
|
stored in Rock27Boot.bin recovery file.
|
|
|
|
|
|
rkusbtool
|
|
This directory contains tool which sends custom scsi commands to the
|
|
rockchip player.
|
|
|
|
You need libusb-1.0 + header files in order to compile this utility.
|