e8a8a1be43
Included are drivers for buttons, backlight, lcd, audio and storage. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
290 lines
7.2 KiB
C
290 lines
7.2 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by Tomasz Moń
|
|
* Copyright (C) 2008 by Maurus Cuelenaere
|
|
*
|
|
* DM320 I²C driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "system.h"
|
|
#include "thread.h"
|
|
#include "i2c-dm320.h"
|
|
|
|
#ifdef HAVE_SOFTWARE_I2C
|
|
#include "generic_i2c.h"
|
|
#endif
|
|
|
|
#ifndef HAVE_SOFTWARE_I2C
|
|
|
|
static struct mutex i2c_mtx;
|
|
|
|
static inline void i2c_begin(void)
|
|
{
|
|
mutex_lock(&i2c_mtx);
|
|
}
|
|
|
|
static inline void i2c_end(void)
|
|
{
|
|
mutex_unlock(&i2c_mtx);
|
|
}
|
|
|
|
#define I2C_SCS_COND_START 0x0001
|
|
#define I2C_SCS_COND_STOP 0x0002
|
|
#define I2C_SCS_XMIT 0x0004
|
|
|
|
#define I2C_TX_ACK (1 << 8)
|
|
|
|
static inline bool i2c_getack(void)
|
|
{
|
|
return (IO_I2C_RXDATA >> 8) & 1;
|
|
}
|
|
|
|
static inline void i2c_ack(void)
|
|
{
|
|
IO_I2C_TXDATA |= I2C_TX_ACK;
|
|
}
|
|
|
|
#define WAIT_FOR_I2C if(IO_I2C_SCS & 0x4){ \
|
|
while(IO_I2C_SCS & 0x4) { \
|
|
asm volatile("nop"); \
|
|
} \
|
|
} \
|
|
|
|
static inline void i2c_start(void)
|
|
{
|
|
IO_I2C_SCS |= I2C_SCS_XMIT;
|
|
return;
|
|
}
|
|
|
|
int i2c_write(unsigned short address, const unsigned char *buf, int count)
|
|
{
|
|
int i;
|
|
int ret=0;
|
|
i2c_begin();
|
|
IO_I2C_TXDATA = ( (address << 1) & 0xFF ) | (address>0x7F ? 0 : 1 ) | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_START; // write 'start condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
/* experimental */
|
|
if(address>0x7F){ // check if it is 10-bit instead of 7-bit
|
|
IO_I2C_TXDATA = ( (address >> 7) & 0xFF) | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //normal transfer
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
IO_I2C_TXDATA = ( (address << 1) & 0xFF) | 1 | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_START; //write 'start condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
}
|
|
|
|
for(i=0; i<count; i++){
|
|
IO_I2C_TXDATA = buf[i] | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //normal transfer
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
if(!i2c_getack())
|
|
ret = -1;
|
|
}
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_STOP; //write 'stop condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
i2c_end();
|
|
return ret;
|
|
}
|
|
|
|
int i2c_read(unsigned short address, unsigned char* buf, int count)
|
|
{
|
|
int i;
|
|
int ack=0;
|
|
i2c_begin();
|
|
IO_I2C_TXDATA = ( (address << 1) & 0xFF ) | (address>0x7F ? 0 : 1 ) | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_START; // write 'start condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
/* experimental */
|
|
if(address>0x7F){ // check if it is 10-bit instead of 7-bit
|
|
IO_I2C_TXDATA = ( (address >> 7) & 0xFF ) | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //normal transfer
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
IO_I2C_TXDATA = ( (address << 1) & 0xFF ) | 1 | I2C_TX_ACK;
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_START; //write 'start condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
}
|
|
|
|
for(i=0; i<count; i++){
|
|
unsigned short temp;
|
|
IO_I2C_TXDATA = 0xFF | ( (count-1)==i ? I2C_TX_ACK : 0);
|
|
IO_I2C_SCS &= ~0x3; //normal transfer
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
temp = IO_I2C_RXDATA;
|
|
buf[i] = temp & 0xFF;
|
|
ack = (temp & 0x100) >> 8;
|
|
}
|
|
IO_I2C_SCS &= ~0x3; //clear conditions
|
|
IO_I2C_SCS |= I2C_SCS_COND_STOP; //write 'stop condition'
|
|
i2c_start();
|
|
WAIT_FOR_I2C;
|
|
i2c_end();
|
|
return ack;
|
|
}
|
|
|
|
void i2c_init(void)
|
|
{
|
|
mutex_init(&i2c_mtx);
|
|
|
|
#ifdef CREATIVE_ZVx //TODO: mimic OF I2C clock settings; currently this is done by the bootloader
|
|
IO_CLK_MOD2 &= ~CLK_MOD2_I2C; // turn I²C clock off (just to be sure)
|
|
IO_CLK_LPCTL1 &= ~1; // set Powerdown mode to off
|
|
IO_CLK_SEL0 &= ~0x800; // set I²C clock to PLLA
|
|
IO_CLK_DIV4 &= ~0x1F; // I²C clock division = 1
|
|
IO_CLK_MOD2 |= CLK_MOD2_I2C; // enable I²C clock
|
|
#endif
|
|
IO_I2C_SCS &= ~0x8; //set clock to 100 kHz
|
|
IO_INTC_EINT2 &= ~INTR_EINT2_I2C; // disable I²C interrupt
|
|
}
|
|
|
|
#else /* Software I2C implementation */
|
|
|
|
#ifdef SANSA_CONNECT
|
|
/* SDA - GIO35 */
|
|
#define SDA_SET_REG IO_GIO_BITSET2
|
|
#define SDA_CLR_REG IO_GIO_BITCLR2
|
|
#define SOFTI2C_SDA (1 << 3)
|
|
/* SCL - GIO36 */
|
|
#define SCL_SET_REG IO_GIO_BITSET2
|
|
#define SCL_CLR_REG IO_GIO_BITCLR2
|
|
#define SOFTI2C_SCL (1 << 4)
|
|
#else
|
|
#error Configure SDA and SCL lines
|
|
#endif
|
|
|
|
static int dm320_i2c_bus;
|
|
|
|
static void dm320_scl_dir(bool out)
|
|
{
|
|
if (out)
|
|
{
|
|
IO_GIO_DIR2 &= ~(SOFTI2C_SCL);
|
|
}
|
|
else
|
|
{
|
|
IO_GIO_DIR2 |= SOFTI2C_SCL;
|
|
}
|
|
}
|
|
|
|
static void dm320_sda_dir(bool out)
|
|
{
|
|
if (out)
|
|
{
|
|
IO_GIO_DIR2 &= ~(SOFTI2C_SDA);
|
|
}
|
|
else
|
|
{
|
|
IO_GIO_DIR2 |= SOFTI2C_SDA;
|
|
}
|
|
}
|
|
|
|
static void dm320_scl_out(bool high)
|
|
{
|
|
if (high)
|
|
{
|
|
SCL_SET_REG = SOFTI2C_SCL;
|
|
}
|
|
else
|
|
{
|
|
SCL_CLR_REG = SOFTI2C_SCL;
|
|
}
|
|
}
|
|
|
|
static void dm320_sda_out(bool high)
|
|
{
|
|
if (high)
|
|
{
|
|
SDA_SET_REG = SOFTI2C_SDA;
|
|
}
|
|
else
|
|
{
|
|
SDA_CLR_REG = SOFTI2C_SDA;
|
|
}
|
|
}
|
|
|
|
static bool dm320_scl_in(void)
|
|
{
|
|
return (SCL_SET_REG & SOFTI2C_SCL);
|
|
}
|
|
|
|
static bool dm320_sda_in(void)
|
|
{
|
|
return (SDA_SET_REG & SOFTI2C_SDA);
|
|
}
|
|
|
|
/* simple delay */
|
|
static void dm320_i2c_delay(int delay)
|
|
{
|
|
udelay(delay);
|
|
}
|
|
|
|
/* interface towards the generic i2c driver */
|
|
static const struct i2c_interface dm320_i2c_interface = {
|
|
.scl_dir = dm320_scl_dir,
|
|
.sda_dir = dm320_sda_dir,
|
|
.scl_out = dm320_scl_out,
|
|
.sda_out = dm320_sda_out,
|
|
.scl_in = dm320_scl_in,
|
|
.sda_in = dm320_sda_in,
|
|
.delay = dm320_i2c_delay,
|
|
|
|
/* uncalibrated */
|
|
.delay_hd_sta = 1,
|
|
.delay_hd_dat = 1,
|
|
.delay_su_dat = 1,
|
|
.delay_su_sto = 1,
|
|
.delay_su_sta = 1,
|
|
.delay_thigh = 1
|
|
};
|
|
|
|
void i2c_init(void)
|
|
{
|
|
#ifdef SANSA_CONNECT
|
|
IO_GIO_FSEL3 &= 0xFF0F; /* GIO35, GIO36 as normal GIO */
|
|
IO_GIO_INV2 &= ~(SOFTI2C_SDA | SOFTI2C_SCL); /* not inverted */
|
|
#endif
|
|
|
|
/* generic_i2c takes care of setting direction */
|
|
dm320_i2c_bus = i2c_add_node(&dm320_i2c_interface);
|
|
}
|
|
|
|
int i2c_write(unsigned short address, const unsigned char* buf, int count)
|
|
{
|
|
return i2c_write_data(dm320_i2c_bus, address, -1, buf, count);
|
|
}
|
|
|
|
int i2c_read(unsigned short address, unsigned char* buf, int count)
|
|
{
|
|
return i2c_read_data(dm320_i2c_bus, address, -1, buf, count);
|
|
}
|
|
|
|
#endif
|