rockbox/firmware/target/mips/ingenic_jz47xx/system-target.h
Maurus Cuelenaere 4bf4d2bb55 * Get interrupts working (but crashes after 10-30secs)
* Make current_tick increase
* Convert button driver into SADC driver
* Make touchscreen handling work better (still needs good calibration routine)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18240 a1c6a512-1295-4272-9138-f99709370657
2008-08-10 21:44:48 +00:00

104 lines
2.8 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __SYSTEM_TARGET_H_
#define __SYSTEM_TARGET_H_
#include "config.h"
#include "jz4740.h"
#include "mipsregs.h"
/* This one returns the old status */
#define HIGHEST_IRQ_LEVEL 0
#define set_irq_level(status) \
set_interrupt_status((status), ST0_IE)
static inline int set_interrupt_status(int status, int mask)
{
unsigned int res, oldstatus;
res = oldstatus = read_c0_status();
res &= ~mask;
res |= (status & mask);
write_c0_status(res);
return oldstatus;
}
static inline void enable_interrupt(void)
{
/* Set IE bit */
set_c0_status(ST0_IE);
}
static inline void disable_interrupt(void)
{
/* Clear IE bit */
clear_c0_status(ST0_IE);
}
#define disable_irq() \
disable_interrupt()
#define enable_irq() \
enable_interrupt()
static inline int disable_interrupt_save(int mask)
{
unsigned int oldstatus;
oldstatus = read_c0_status();
write_c0_status(oldstatus | mask);
return oldstatus;
}
#define disable_irq_save() \
disable_interrupt_save(ST0_IE)
static inline void restore_interrupt(int status)
{
write_c0_status(status);
}
#define restore_irq(c0_status) \
restore_interrupt(c0_status)
#define swap16(x) (((x) & 0xff) << 8 | ((x) >> 8) & 0xff)
#define swap32(x) (((x) & 0xff) << 24 | ((x) & 0xff00) << 8 | ((x) & 0xff0000) >> 8 | ((x) >> 24) & 0xff)
#define UNCACHED_ADDRESS(addr) ((unsigned int)(addr) | 0xA0000000)
#define PHYSADDR(x) ((x) & 0x1fffffff)
void __dcache_writeback_all(void);
void __dcache_invalidate_all(void);
void __icache_invalidate_all(void);
void __flush_dcache_line(unsigned long addr);
void dma_cache_wback_inv(unsigned long addr, unsigned long size);
void system_enable_irq(unsigned int irq);
void sti(void);
void cli(void);
void udelay(unsigned int usec);
void mdelay(unsigned int msec);
#endif /* __SYSTEM_TARGET_H_ */